Tag-Connect, LLC
Tag-Connect TC2030-FTDI-C232HD-EDHSP-0 Hi-Speed USB Serial Cable, 5 V Supply (Legged or No Legs)
Tag-Connect TC2030-FTDI-C232HD-EDHSP-0 Hi-Speed USB Serial Cable, 5 V Supply (Legged or No Legs)
SKU: TC2030-FTDI-C232HD-EDHSP-0
£92.40 exc VAT
Legs clip into leg latch holes on the board, so the cable stays in place hands-free. Best for development and debugging.
Fits a smaller footprint with no leg holes. For production programming and test fixtures, and for bench work when held with a TC2030-CLIP.
Check and Add to Cart
Confirm the price and stock for your selection, set the quantity, then press Add to Cart.
Payment methods
- Bank transfer
Couldn't load pickup availability
Key Features
Overview
The TC2030-FTDI-C232HD-EDHSP-0 is FTDI's C232HD-EDHSP-0 Hi-Speed USB to UART cable with a 6-pin TC2030 Plug-of-Nails head. Its FT232H converter runs the UART at up to 12 Mbaud with 3.3 V signals, and pin 1 (VCC) is a 5 V output from the USB port that can supply up to 450 mA. It suits a serial console, a UART bootloader download or fast logging on a board that takes a 5 V supply and uses 3.3 V logic, with no header fitted.
Choose Legged or No Legs in the options above.
The Legged version clips into leg latch holes in the board and stays put while you work. The No Legs version fits a smaller footprint and suits production programming, test fixtures and bench work with a TC2030-CLIP.
Why Engineers Choose the Tag-Connect TC2030-FTDI-C232HD-EDHSP-0 Hi-Speed USB Serial Cable, 5 V Supply (Legged or No Legs)
12 Mbaud UART
5 V at 450 mA
Legged or No Legs
12 Mbaud, 3.3 V UART with a 5 V Supply on Pin 1, No Header Needed
The TC2030-FTDI-C232HD-EDHSP-0 is FTDI's C232HD-EDHSP-0 Hi-Speed USB to UART cable with a 6-pin TC2030 Plug-of-Nails head. Its FT232H converter runs the UART at up to 12 Mbaud with 3.3 V signals, and pin 1 (VCC) is a 5 V output from the USB port that can supply up to 450 mA. It suits a serial console, a UART bootloader download or fast logging on a board that takes a 5 V supply and uses 3.3 V logic, with no header fitted. The No Legs version is the TC2030-NL-FTDI-C232HD-EDHSP-0.
Options
| Option | Choice | Detail |
|---|---|---|
| Head | Legged | Legs clip into leg latch holes in the PCB, so the cable holds itself in place (TC2030-FTDI-C232HD-EDHSP-0) |
| Head | No Legs | No leg holes, so a smaller footprint; hold by hand, with a TC2030-CLIP, or mount it in a test fixture with a TC-MOUNT-6 bracket (TC2030-NL-FTDI-C232HD-EDHSP-0) |
Specifications
| Parameter | Value |
|---|---|
| FTDI cable | C232HD-EDHSP-0, with an FT232H converter inside the USB plug |
| UART signal level | 3.3 V (output high 2.4 V minimum, typically 3.14 V; output low 0.4 V maximum) |
| Input switching thresholds | Low at 0.8 V or below, high at 2.0 V or above. The signal pins are 5 V tolerant. |
| VCC on pin 1 | 5 V output switched through from the USB port (4.75 V to 5.25 V), 450 mA maximum. The load must fall below 2.5 mA while the USB port is suspended. |
| UART data rate | Up to 12 Mbaud |
| Handshaking | RTS and CTS in hardware, or X-On/X-Off in software |
| Data format | 7 or 8 data bits, 1 or 2 stop bits; odd, even, mark, space or no parity |
| USB | USB 2.0 Hi-Speed (480 Mbps), Full Speed compatible; Type A plug, bus powered. The cable asks the PC for up to 500 mA, which covers its own electronics and the pin 1 output. |
| Indicators | Transmit and receive LEDs |
| Operating temperature (FTDI cable) | -40 °C to +85 °C |
| Cable length | 1.8 m (5.9 ft) nominal |
| Drivers | FTDI VCP (virtual COM port) drivers for Windows, Mac OS X and Linux, and D2XX drivers for Windows and Linux, free to download |
| In the box | Cable only. No retaining clip or fixture is included. FTDI's drivers are a free download. |
Pin Connections
| TC2030 Pin | FTDI Signal (Wire Colour) | Direction | Function |
|---|---|---|---|
| 1 | VCC (red) | Output | 5 V from the USB port, 450 mA maximum |
| 2 | CTS / TMS (brown) | Input | Clear to send handshake |
| 3 | RXD / TDI (yellow) | Input | Receive data, from your board's TX |
| 4 | TXD / TCLK (orange) | Output | Transmit data, to your board's RX |
| 5 | GND (black) | Ground | Ground |
| 6 | RTS / TDO (green) | Output | Request to send handshake |
Check your board's voltage: pin 1 (VCC) is a 5 V output taken from the USB port, but the UART signals are 3.3 V. Do not connect pin 1 to a 3.3 V rail. If your board runs from 3.3 V, leave the VCC pad unconnected or choose the TC2030-FTDI-C232HD-DDHSP-0, which supplies 3.3 V on pin 1. The cable's outputs (TXD and RTS) drive to about 3.3 V, so a board with 5 V logic must read 3.3 V as a logic high. FTDI's datasheet says the signal pins are 5 V tolerant, so the inputs (RXD and CTS) accept 5 V signals. For 5 V signal levels, choose the TC2030-FTDI-TTL-234X-5V (up to 3 Mbaud). For 1.8 V logic, choose the 1.8 V version of the TC2030-FTDI-TTL-232RG.
The CTS, RXD, TXD and RTS lines also carry the TMS, TDI, TCLK and TDO names in Tag-Connect's pin table for this cable.
The FTDI cable's other four lines (DTR, DSR, DCD and RI) are not connected to the TC2030 head. If your board needs DTR on pin 2 in place of CTS, see the TC2030-FTDI-C232HD-DTR, which is available with this 5 V supply cable.
PCB footprint: the standard 6-pin TC2030 footprint. Tag-Connect publishes separate Legged and No Legs footprints; the No Legs footprint has no leg holes and takes less board space. Leave the contact pads free of solder paste and keep tracks and vias out of the keep-out area.
Spring-Pin Contacts
In Tag-Connect's cycle testing, its spring pins last for well over 100,000 operations.
Who It's For
Engineers who need a 12 Mbaud serial link to a board that takes 5 V in but talks 3.3 V logic, with six pads on the PCB instead of a UART header.
| Target | Task | Connection |
|---|---|---|
| MCU, FPGA or module with a 3.3 V UART | Serial console, log output and command line | TX, RX and GND, plus RTS and CTS if your firmware uses hardware flow control |
| MCU with a UART bootloader | Firmware download over the serial bootloader | The PC sees a virtual COM port, so the vendor's bootloader tool or a terminal program talks to it directly |
| Board with a fast UART and a 5 V input | High-rate logging, with the board powered from the cable | UART up to 12 Mbaud; 5 V at up to 450 mA on pin 1 |
Compare the FTDI Cables
Tag-Connect fits the same TC2030 head to several FTDI cables. They differ in signal level, what pin 1 does and data rate:
| Cable | FTDI Cable | VCC on Pin 1 | UART Signal Level | Data Rate | Pin 2 |
|---|---|---|---|---|---|
| TC2030-FTDI-TTL-232R-3V3 | TTL-232R-3V3 | 5 V output, 75 mA | 3.3 V | 3 Mbaud | CTS |
| TC2030-FTDI-TTL-232R-5V | TTL-232R-5V | 5 V output, 75 mA | 5 V | 3 Mbaud | CTS |
| TC2030-FTDI-TTL-234X-3V3 | TTL-234X-3V3 | 5 V output, 450 mA | 3.3 V | 3 Mbaud | CTS |
| TC2030-FTDI-TTL-234X-5V | TTL-234X-5V | 5 V output, 450 mA | 5 V | 3 Mbaud | CTS |
| TC2030-FTDI-TTL-232RG-VIP | TTL-232RG-VIP | Input: your board supplies 1.8 V to 5.25 V | Follows your board's VCC | 3 Mbaud | CTS |
| TC2030-FTDI-TTL-232RG (VREG and VSW) | TTL-232RG-VREG1V8, VREG3V3, VSW3V3, VSW5V | 1.8 V at 100 mA (VREG1V8), 3.3 V at 250 mA (VREG3V3), 3.3 V at 50 mA (VSW3V3) or 5 V at 450 mA (VSW5V) | 1.8 V, 3.3 V or 5 V, by version | 3 Mbaud | CTS |
| TC2030-FTDI-C232HD-DDHSP-0 | C232HD-DDHSP-0 (FT232H) | 3.3 V output, 250 mA | 3.3 V | 12 Mbaud | CTS |
| TC2030-FTDI-C232HD-EDHSP-0 (this cable) | C232HD-EDHSP-0 (FT232H) | 5 V output, 450 mA | 3.3 V | 12 Mbaud | CTS |
| TC2030-FTDI-C232HD-DTR | C232HD-DDHSP-0 or EDHSP-0 (FT232H) | 3.3 V at 250 mA or 5 V at 450 mA | 3.3 V | 12 Mbaud | DTR |
For UART up to 12 Mbaud with no separate converter cable, see the TC2030-CIC-FT232H Chip-in-Connector, which has the FT232H inside the connector head.
Compare the Versions
| Part Number | Head | Best For |
|---|---|---|
| TC2030-FTDI-C232HD-EDHSP-0 | Legged | Development and debugging: clips in and stays connected hands-free |
| TC2030-NL-FTDI-C232HD-EDHSP-0 | No Legs | Production programming and test fixtures, or bench work with a TC2030-CLIP; smaller footprint |
Both versions use the same FTDI cable and pinout; only the head differs.
Need a different interface? See all FTDI Tag-Connect cables or our full Tag-Connect cable range.
| Ordering information | |
|---|---|
| Part number (SKU) | TC2030-FTDI-C232HD-EDHSP-0 |
| Manufacturer | Tag-Connect, LLC |
| EAN | 5055383622658 |
| Warranty | 6 months |
- 1 ×Tag-Connect TC2030-FTDI-C232HD-EDHSP-0 cable, in the version you select (Legged or No Legs)
Cable only. No retaining clip or fixture is included. FTDI's drivers are a free download.
Questions and Answers
-
What Is the Tag-Connect TC2030-FTDI-C232HD-EDHSP-0 Used For?
It gives a PC a 3.3 V UART link at up to 12 Mbaud to a board through six pads in the TC2030 footprint, with no header fitted, and it can power the board with 5 V from the USB port on pin 1. Typical jobs are a serial console, a firmware download over a UART bootloader, and fast logging or data transfer that a 3 Mbaud cable cannot keep up with.
-
Are the UART Signals 5 V?
No. The UART signals are 3.3 V; only the supply on pin 1 is 5 V. The cable's outputs (TXD and RTS) drive to about 3.3 V, so a board with 5 V logic must read 3.3 V as a logic high. FTDI's datasheet says the signal pins are 5 V tolerant, so the inputs (RXD and CTS) accept 5 V signals. For 5 V signal levels, choose the TC2030-FTDI-TTL-234X-5V, which runs at up to 3 Mbaud.
-
Can I Power My Board From the Cable?
Yes, if your board takes a 5 V supply. Pin 1 (VCC) is a 5 V output switched through from the USB port, so it follows the port's voltage: FTDI's datasheet gives 4.75 V to 5.25 V and a 450 mA maximum. Use a USB port that can supply 500 mA, such as a PC port or a powered hub, because that figure covers the cable's own electronics as well as your board. The datasheet limits the current to under 2.5 mA while the PC has the USB port suspended, so do not rely on pin 1 to keep a board running when the PC sleeps. If your board has its own supply, leave the VCC pad unconnected.
-
Can I Use It with a 3.3 V Board?
Yes for the signals, but do not connect pin 1. The UART signals are 3.3 V, so they suit a 3.3 V board directly. Pin 1 (VCC) is a 5 V output and must not reach a 3.3 V rail, so leave the VCC pad unconnected and power the board from its own supply. If you want the cable to supply 3.3 V, choose the TC2030-FTDI-C232HD-DDHSP-0.
-
How Does It Differ From the TC2030-FTDI-C232HD-DDHSP-0?
The difference is the supply on pin 1. This cable gives 5 V at up to 450 mA, taken from the USB port; the TC2030-FTDI-C232HD-DDHSP-0 gives 3.3 V at up to 250 mA from its own regulator. Both have 3.3 V UART signals, the same pinout and the same 12 Mbaud top rate. Choose this one when your board needs a 5 V supply from the cable.
-
How Does It Differ From the DTR Version?
On this cable, TC2030 pin 2 carries CTS, so RTS and CTS give hardware flow control. On the TC2030-FTDI-C232HD-DTR, pin 2 carries DTR instead, which some serial bootloaders use to reset the board or start a download. The DTR version is available with this 5 V supply cable. Choose it only if your board's design puts DTR on that pad.
No questions match your search.
