
Key Features
Overview
The RL78 14-Pin Programming Adapter connects a SEGGER Flasher to Renesas RL78 targets, adapting the standard 20-pin 0.1" connector to the 14-pin E1 connector defined by Renesas. It can power the target at 3.3V or 5V, selected by jumper, and SEGGER lists 26 supported RL78 cores across the D, F, G, I and L groups. It is built for flash programming only.
Why Engineers Choose the SEGGER RL78 14-Pin Programming Adapter (8.06.20)
Production Programming
Universal RL78 Support
Flexible Power Options
The SEGGER RL78 14-Pin Programming Adapter (part number 8.06.20) connects a SEGGER Flasher to Renesas RL78 targets, adapting the standard 20-pin 0.1" connector to the 14-pin E1 connector defined by Renesas. It can power the target at 3.3V or 5V, selected by jumper, and SEGGER lists 26 supported RL78 cores across the D, F, G, I and L groups. It is built for flash programming on a Flasher PRO, PRO XL, Compact or Portable PLUS, in production or at the bench.
Flash Programming of RL78 Through the Renesas E1 Connector
The adapter plugs into the Flasher's 20-pin 0.1" connector and presents the Renesas 14-pin E1 header to the target, so an RL78 board laid out for the Renesas E1 can be programmed with a Flasher without rewiring. SEGGER lists these cores: RL78/D1A; RL78/F12, F13, F14 and F15; RL78/G10, G11, G12, G13 and G14; RL78/G1A, G1C, G1D, G1E, G1F, G1G and G1H; RL78/I1A, I1B, I1C, I1D and I1E; and RL78/L12, L13, L1A and L1C.
Target Supply and TOOL0 Pull-Up
A jumper selects a 3.3V or 5V target supply. When the supply option is jumpered, the target is powered through the VTREF connection. RL78 TOOL0 pins are open drain and need an external pull-up resistor, which evaluation boards usually provide; for targets without one, the adapter has an additional solder bridge between VTREF and TOOL0 where a pull-up resistor can be placed.
What's Included
SEGGER publishes no box list for this adapter. The order is for the RL78 14-Pin Programming Adapter itself.
Specifications
| Programmer-side connector | 20-pin 0.1" |
|---|---|
| Target-side connector | 14-pin E1 connector (Renesas standard) |
| Target supply | 3.3V or 5V, jumper selectable, via VTREF |
| TOOL0 pull-up | Solder bridge between VTREF and TOOL0 for an optional pull-up resistor |
| Supported cores | 26 RL78 cores: D1A; F12 to F15; G10 to G14; G1A, G1C to G1H; I1A to I1E; L12, L13, L1A, L1C |
| Use | Flash programming only |
| Compatible programmers | Flasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS |
Limitations
- Flash programming only: SEGGER states the adapter cannot be used with a J-Link and cannot be used to debug RL78 devices.
- SEGGER publishes no maximum target supply current for the adapter.
- Targets without a TOOL0 pull-up need a resistor fitted, either on the board or at the adapter's solder bridge.
RL78 Adapter Compared with Related SEGGER Renesas and Flasher Adapters
| Adapter | Targets | Target connector | Target supply | Price ex VAT |
|---|---|---|---|---|
| RL78 14-Pin Programming Adapter (this product) | Renesas RL78, Flasher only | 14-pin Renesas E1 | 3.3V or 5V, jumper | £60 |
| Renesas RX Adapter | Renesas RX600, RX200, RX100; J-Link or Flasher | Renesas RX connector | 3.3V or 5V, jumper | £130 |
| Renesas M16C Family 10-Pin Adapter | Renesas M16C, Flasher PRO | Renesas 10-pin programming connector | Not stated | £60 |
| STM8 Adapter | ST STM8, Flasher only | SWIM connector, 10-pin | 3.3V or 5V, jumper; external power input | £63 |
Order the RL78 14-Pin Programming Adapter for £60 ex VAT. Check your RL78 core against the list above, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| TOOL0 pull-up | Solder bridge between VTREF and TOOL0 for an optional pull-up resistor |
| Use | Flash programming only |
| Host and Target Interface | |
| Programmer-side connector | 20-pin 0.1" |
| Target-side connector | 14-pin E1 connector (Renesas standard) |
| Power | |
| Target supply | 3.3V or 5V, jumper selectable, via VTREF |
| Software and Compatibility | |
| Supported cores | 26 RL78 cores: D1A; F12 to F15; G10 to G14; G1A, G1C to G1H; I1A to I1E; L12, L13, L1A, L1C |
| Compatible programmers | Flasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS |
| Ordering information | |
| Part number (SKU) | 8.06.20 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383605743 |
| Warranty | 12 months |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER RL78 14-Pin Programming Adapter (8.06.20)
Contact us to confirm the full contents of the box.
Questions and Answers
-
Can I Debug RL78 Devices Through This Adapter?
No. SEGGER states that the adapter is usable only for flash programming; it cannot be used with a J-Link or for debugging RL78 devices.
-
Do I Need a Pull-Up Resistor on TOOL0?
Yes, an external one. RL78 TOOL0 pins are open drain. Evaluation boards usually fit the resistor; if your board does not, the adapter has a solder bridge between VTREF and TOOL0 where one can be placed.
-
Can This Adapter Power My Target Board During Programming?
Yes, when the supply jumper is configured, the adapter can provide either 3.3V or 5V to power the target via the VTREF connection. SEGGER publishes no current rating for the adapter; the Flasher's own target supply limit applies (Flasher PRO: up to 400mA at 5V).
-
Is This Adapter Compatible with All SEGGER Flasher Models?
No. It works with the Flasher models SEGGER lists: Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS.
-
What Programming Protocols Does the Adapter Support?
The adapter uses the RL78 TOOL0 programming pin and is for flash programming.
-
Can I Use This Adapter for In-Circuit Programming?
Yes, this adapter is designed for in-circuit programming applications. It allows programming of RL78 devices that are already soldered onto target PCBs through the 14-pin E1 connector interface.
-
How Do I Connect This Adapter to My Programming Setup?
To connect the adapter:
- Connect the 20-pin connector to your SEGGER Flasher.
- Connect the 14-pin ribbon cable to your target board's E1 connector.
- Set the voltage selection jumper as needed.
- Make sure the ground connections are sound.
-
What RL78 Microcontrollers Does This Adapter Support?
The adapter supports the RL78 series SEGGER lists: D1A; F12, F13, F14, F15; G10, G11, G12, G13, G14; G1A, G1C, G1D, G1E, G1F, G1G, G1H; I1A, I1B, I1C, I1D, I1E; L12, L13, L1A, L1C. The connector is the standard 14-pin E1 header defined by Renesas.
-
Can I Use This Adapter with J-Link Debug Probes for Debugging?
No, this adapter is exclusively designed for flash programming with SEGGER Flasher tools. It cannot be used with J-Link debug probes and does not support debugging functionality. For debugging RL78 devices, check SEGGER's RL78 support for J-Link separately.
-
How Do I Select Between 3.3V and 5V Target Supply Voltage?
The adapter features a jumper that allows selection between 3.3V and 5V supply voltage. When the supply option is jumpered, the target receives power via the VTREF connection. Remove the jumper if your target has independent power supply.
-
Do I Need External Pull-Up Resistors for the TOOL0 Line?
RL78 devices need pull-up resistors on the TOOL0 line. Most evaluation boards include them, and for targets without built-in pull-ups the adapter also provides a solder bridge between VTREF and TOOL0.
-
Does the Adapter Come with a Cable?
SEGGER's product photo shows a 14-pin ribbon cable; delivery contents are not listed on segger.com.
No questions match your search.