Xeltek SA626A 34-pin SSOP Programmer Adapter

The Xeltek SA626A is a 34-pin SSOP socket adapter (SSOP34, 0.65mm pitch, 5.3mm body width) with an opentop socket, for Xeltek's 48-pin-driver SuperPro programmers: the SuperPro 610P and 611S, and older models including the SuperPro M. It takes loose SSOP34 devices for off-board programming in engineering and low-volume production work.

SSOP34 Socket Adapter for the SuperPro 610P, 611S and SuperPro M

Xeltek matches each adapter series to a programmer family. Xeltek lists the SA series for its 48-pin-driver SuperPro programmers: the SuperPro 610P and 611S, and older models including the SuperPro M, 601S, 600P, 501S, 500P, 3000U, 580U and 280U. Of the programmers we sell, that means the SuperPro M. The SA626A replaces Xeltek's earlier SA626, which was an SSOP28 adapter at the same 0.65mm pitch, so check the code when you order.

Not for the SuperPro 6000 or 6000E

If you program on a SuperPro 6000 or SuperPro 6000E, you need a CX-series adapter, not the SA626A. The SuperPro 6100 family takes DX adapters. Xeltek's Device Search returns the programmer and adapter for a device part number, so send us the part number and programmer model and we will confirm the right one before you order.

Specifications

Limitations

• For the SuperPro 610P, 611S and Xeltek's older 48-pin-driver programmers such as the SuperPro M. Not for the SuperPro 5000, 6000, 6000E, 6100 or 7000 series.
• Fits SSOP34 parts with a 0.65mm pitch and 5.3mm body width only.
• Not for in-system programming. For soldered parts, see the SuperPro IS01.

Other Xeltek Socket Adapters

Order the Xeltek SA626A from £159.50 ex VAT. Send us your device part number and SuperPro model to confirm the fit, or request a formal quotation. For programmers and other adapters, see the Xeltek range.

Frequently Asked Questions

Does the SA626A Work with the SuperPro 6000?

No. Xeltek pairs SA adapters with the SuperPro 610P, 611S and its older 48-pin-driver programmers such as the SuperPro M. The SuperPro 6000 and 6000E use CX-series adapters.

Answered by John Legg, Director, Debug Store

What Is the Difference Between the SA626 and SA626A?

The package. Xeltek lists the SA626 as an SSOP28 adapter, now discontinued, and the SA626A as SSOP34, both at 0.65mm pitch.

Answered by John Legg, Director, Debug Store

Does the SA626A Fit the SuperPro M?

Yes, at series level. Xeltek lists the SA series for the SuperPro 610P, 611S and its older 48-pin-driver programmers, and the SuperPro M has 48 pin drivers. Xeltek's device list decides per chip, so send us the device part number and we will check it against the SuperPro M list before you order.

Answered by John Legg, Director, Debug Store

Last reviewed: 30 October 2026