
Key Features
Overview
The Dediprog SPI-127-SOP008-207mil-01FE programming adapter enables reliable programming of SOP8W packaged memory devices using Dediprog's professional programmer range. Featuring an open-top socket design with precision spring-loaded contacts, this adapter ensures consistent electrical connection whilst accommodating the 207mil wide body format common in modern SPI Flash and EEPROM devices.
This adapter forms part of Dediprog's comprehensive socket adapter series, specifically engineered for the SOP8W package variant which features a wider 207mil body compared to standard 150mil SOP8 packages. The robust construction supports high-volume production programming whilst maintaining the precision required for development and prototyping applications.
Compatible with leading memory manufacturers including Microchip, Winbond, SST, and others, this adapter supports both single and quad SPI protocols. Engineers can programme device firmware, bootloaders, and configuration data with confidence using Dediprog's extensive programmer ecosystem and the intuitive DediWare software suite.
Downloads
Why Engineers Choose The Dediprog 8-Pin SOP8W Programming Adapter for SPI Flash/EEPROM - 207mil Wide
Wide Package Compatibility
Production Reliability
Visual Verification
Professional SOP8W Programming Solution
The Dediprog 8-Pin SOP8W Programming Adapter (SPI-127-SOP008-207mil-01FE) provides a robust socket interface for programming SPI Flash and EEPROM devices in the standard 207mil wide SOP8 package. This open-top design ensures reliable pin contact whilst supporting a comprehensive range of 8-pin SPI NOR Flash, SPI NAND Flash, and EEPROM devices.
Wide SOP8 Package Compatibility
Designed specifically for SOP8W packages with 207mil body width, this adapter accommodates popular memory devices including:
- 25-series SPI NOR Flash memory
- 24-series I²C EEPROM devices
- 93-series microwire EEPROM chips
- Microchip, Winbond, SST memory products
Package Specifications: Length 5.28mm, Width 5.23mm, Height 2.16mm, Pin Pitch 1.27mm
Wiring Quick-Start Guide
Connect your SOP8W device following these standard SPI pinout connections:
| Pin | Function | Description |
|---|---|---|
| 1 | CS | Chip Select (active low) |
| 2 | MISO | Master In Slave Out |
| 3 | WP | Write Protect (active low) |
| 4 | GND | Ground |
| 5 | MOSI | Master Out Slave In |
| 6 | CLK | Serial Clock |
| 7 | HOLD | Hold (active low) |
| 8 | VCC | Power Supply (3.3V typical) |
Important: Always verify pin 1 orientation before inserting device. Pin 1 is typically marked with a dot or chamfered corner.
Programming Example
Typical programming sequence for SPI EEPROM devices:
1. Power up programmer and connect adapter 2. Insert SOP8W device with correct pin 1 alignment 3. Select appropriate device type in DediWare software 4. Load binary file for programming 5. Execute Write Enable command 6. Program device memory 7. Verify written data 8. Set Write Protect if required Compatible Programmers
This adapter works seamlessly with:
The adapter's open-top design allows visual inspection of device placement and pin alignment, whilst the precision socket ensures consistent electrical contact throughout the programming cycle. Gold-plated pins provide long-term reliability and corrosion resistance.
| General Information | |
|---|---|
Part Number (SKU) |
SPI-127-SOP008-207mil-01FE
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.5 kg
|
| Other | |
EAN |
5055383690398
|
Questions and Answers
-
Is This Adapter Suitable for Production Programming?
It can be used in production, but Dediprog publishes no cycle-life figure for its socket adapters. Check contact quality regularly and replace the adapter when programming becomes unreliable.
-
What Are the Physical Dimensions of Supported Devices?
It takes SOP8 207mil (wide) devices with 1.27mm pin pitch. Dediprog no longer publishes a dimension table for this adapter; its current sister adapter, SPI-127-SOP008-207mil-01AW, lists a 5.23mm × 5.23mm body and 2.03mm height. Check your device's datasheet.
-
Can I Use This Adapter for In-System Programming?
No. It's a socket adapter for offline programming. For in-system programming, see our Dediprog ISP cables and adapters.
-
How Do I Verify Successful Programming?
Use the Verify function in DediWare (ProgMaster and StarProg programmers) or SF Software (SF-series programmers) to compare the device contents with your source file.
-
What Happens If I Insert a Device Incorrectly?
Check pin 1 alignment before you start. Incorrect insertion can damage the device and the socket, and the software's contact check is not a full check of orientation.
-
What Is the Difference Between SOP8 and SOP8W Packages?
SOP8W (wide) packages have a 207mil (about 5.2mm) body width, compared with 150mil (about 3.9mm) for standard SOP8. This adapter takes the wider package.
-
Which Dediprog Programmers Are Compatible with This Adapter?
Dediprog's current sister adapter is listed for the SF100, SF600Plus-G2 (with its ProgMaster-type socket board), SF700, ProgMaster-U4 and ProgMaster-U8. Dediprog's socket adaptor guide also covers the SF600Plus and StarProg programmers, which are now discontinued. Ask us to confirm the fit for your programmer.
-
Can I Programme Both SPI Flash and EEPROM Devices?
It supports 25-series SPI NOR flash and SPI EEPROM devices in SOP8 207mil packages. Dediprog doesn't list 24-series (I²C) or 93-series (Microwire) EEPROM for this adapter.
-
How Do I Ensure Correct Pin 1 Orientation?
Pin 1 is usually marked with a dot, chamfered corner or notch on the device package. Align this marking with the pin 1 indicator on the socket adapter before inserting.
-
What Voltage Levels Does This Adapter Support?
The adapter itself has no voltage setting: the programmer sets the supply voltage for the device you select. The SF600Plus-G2 supports ICs down to 1.2V.
No questions match your search.