Beagle I2C/SPI Protocol Analyzer Unboxing and Quick Start
Video notes

The Total Phase Beagle I2C/SPI Analyser (TP320121) is a USB-powered protocol analyser that monitors I2C up to 4 MHz, SPI up to 24 MHz and MDIO up to 2.5 MHz passively, without driving the bus, with bit-level timing to 20 ns. It is for embedded engineers debugging I2C or SPI peripherals during bring-up, firmware development and production test.
10% off the Beagle when ordered with an Aardvark I2C/SPI (TP240141) or Cheetah SPI (TP280121). One Beagle per order, applied automatically in the cart. No end date.
The Beagle ships with its 10-pin ribbon cable and a USB cable, but no split cable. Where your board has no 2x5 0.1 in (2.54 mm) header, the 10-Pin Split Cable (TP240212) gives individual leads for each pin and fits the Beagle, Aardvark and Cheetah alike. Total Phase's I2C and SPI development kits include two.
Data Center software shows each I2C or SPI transaction as it happens, decoded to protocol level with error codes. LiveFilter and LiveSearch narrow a long capture to one address, pattern or error without stopping the capture.
Runs from the USB port of a Windows 7, 10 or 11 PC, a Linux machine (Red Hat, SuSE, Ubuntu, Fedora) or a Mac on macOS 13 or later. Target signals are 3.3 V logic; for targets below 3.3 V, use the Level Shifter Board (TP240610). Measures 55.6 x 22.2 x 89 mm and weighs 64 g.
Total Phase's Data Center software, the Beagle API (C, C++, C#, Python, .NET, VB.NET, VB6) and the LabVIEW driver are free downloads from Total Phase, with no licence fee for updates.
Add the Beagle to your cart, or ask us whether the Beagle or the Promira Serial Platform suits your bus speeds before you order.
Video notes
Videos are hosted on YouTube and load only when you press play.
Data captured by the Beagle I2C/SPI Analyser is displayed on screen as it arrives. This is especially useful when capturing slow data from HMI devices: the effect of a change can be seen straight away.
Many analysers show a capture only after it stops; the Beagle with Data Center shows each transaction as it happens, so the impact of a change on the bus is understood quickly.
Running on Windows 7, 10 and 11, Linux (Red Hat, SuSE, Ubuntu, Fedora) and macOS 13 and later, the Total Phase Beagle I2C/SPI Analyser is a low-cost way to monitor I2C, SPI or MDIO buses: I2C to 4 MHz, SPI to 24 MHz and MDIO to 2.5 MHz.
The Beagle is a passive monitor: it adds only about 15 pF to each bus line and does not drive the bus. Attach it inline to capture the traffic to the target devices.
Captured data is streamed via High-Speed USB directly to your computer. The amount of data captured is limited only by the physical memory available on the machine.
As well as the timing of a whole packet, the Beagle gives the timing of each bit in a packet, with a resolution of 20 ns.
The Beagle has a High-Speed USB 2.0 interface (480 Mbps) to the analysis PC. USB also powers the analyser, so no external supply is needed.

Last reviewed 24 October 2026.
| Ordering information | |
|---|---|
| Part number (SKU) | TP320121 |
| Manufacturer | Total Phase, Inc |
| EAN | 5055383601820 |
| Warranty | 2 years |
| Shipping weight | 1.0 kg |
Contact us to confirm the full contents of the box.
Total Phase Beagle I2C/SPI Analyser compared with Total Phase PROMIRA I2C Analysis Application , Total Phase PROMIRA SPI Analysis - Level 1 Application and Total Phase PROMIRA SPI Analysis - Level 2 Application on 7 specifications.
| Specification | This product
Total Phase Beagle I2C/SPI AnalyserTP320121In stock |
Total Phase PROMIRA I2C Analysis ApplicationTP601110Available to order |
Total Phase PROMIRA SPI Analysis - Level 1 ApplicationTP601510Available to order |
Total Phase PROMIRA SPI Analysis - Level 2 ApplicationTP601610Available to order |
|---|---|---|---|---|
| I2C capture | Up to 4 MHz | Up to 5 MHz | Not supported | Not supported |
| SPI capture | Up to 24 MHz | Not supported | Up to 24 MHz | Up to 40 MHz |
| SPI capture I/O width | Not listed | Not supported | Single I/O | Single I/O |
| MDIO capture | Up to 2.5 MHz (Clause 22 and 45) | Not listed | Not listed | Not listed |
| Voltage level shifting | Accessory board | Built-in | Built-in | Built-in |
| Hardware needed | Standalone analyser | Licence for Promira Serial Platform (TP500110) | Licence for Promira Serial Platform (TP500110) | Licence for Promira Serial Platform (TP500110) |
| PC interface | High-Speed USB | High-Speed USB | High-Speed USB | High-Speed USB |
| Price | £400 | £120 | £120 | £245 |
The Total Phase Beagle I2C/SPI Analyser is a non-intrusive protocol analyser for I2C, SPI and MDIO-based systems.
It captures and displays bus traffic in real time without affecting the target system, so you can find communication issues, timing problems and protocol violations.
The Beagle I2C/SPI Analyzer monitors, analyses and debugs I2C and SPI bus communications. It captures and decodes bus data in real time, so engineers can quickly find and fix problems during development or testing.
The Total Phase Beagle I2C/SPI Analyser monitors I2C at up to 4 MHz, SPI at up to 24 MHz and MDIO at up to 2.5 MHz.
Yes. With the Data Center software, data captured by the Beagle I2C/SPI Analyser is displayed on screen as it appears on the bus, which makes it easier to relate bus activity to physical and real-time events.
An oscilloscope shows low-level signal detail such as jitter, noise and signal integrity. The Beagle I2C/SPI Analyser gives protocol-aware analysis optimised for I2C and SPI.
The Beagle provides automatic protocol decoding, real-time display and transaction-level analysis, which would take a long time with an oscilloscope. It works on digital protocol data rather than raw analogue signals, with LiveFilter and LiveSearch to find specific data patterns.
Many engineers use both: the oscilloscope for signal integrity and the Beagle for protocol debugging.
Common issues and fixes:
The Beagle I2C/SPI Analyser is a passive, non-intrusive monitor.
You connect it in parallel to the bus lines and ground, and it passively captures data, adding only a small load (about 15 pF from its ESD protection). This means you see the system's behaviour with minimal disturbance from the measurement tool.
Yes. The Beagle I2C/SPI Analyser can capture data continuously, limited only by the available memory of the connected computer. This helps find intermittent issues and study behaviour over long periods.
For production testing, its API lets you build it into automated test setups for quality control and production line testing of I2C or SPI devices. The API supports custom applications and automated test scripts in multiple programming languages.
Yes. The Beagle I2C/SPI Analyser can be built into production test setups. Its API allows automation for quality control and production line testing of devices using I2C or SPI.
Total Phase provides the manuals, knowledge base and a support ticket system. Debug Store answers pre-sales and application questions directly: contact us.
Yes. The Beagle I2C/SPI Analyser is useful for reverse engineering I2C or SPI systems. It monitors without affecting the bus and captures detailed data, so you can analyse and understand unknown systems.
The Beagle Analyser is very portable. It is compact and USB-powered, with no external power needed, so it suits field engineers as well as lab use.
The analyser comes with Total Phase Data Center software for real-time monitoring, data capture and analysis. It is free to use with the Beagle Analyser and regularly updated.
Yes. Total Phase provides an API for building custom applications and automated testing scripts. It supports various programming languages, so you can integrate it into existing development workflows.
The Beagle I2C/SPI Analyzer has a timing resolution of 20 ns, which helps you find timing-related issues in communication protocols.
The Beagle I2C/SPI Analyser monitors one SPI slave select line. To monitor several SPI devices on the same bus, capture each device's chip select in turn, or use a logic analyser alongside the Beagle to see all chip selects at once.
Logic analysers do general-purpose signal analysis. The Beagle I2C/SPI Analyser is designed specifically for I2C and SPI, with protocol-aware analysis that makes these buses quicker and easier to debug.
The Beagle I2C/SPI Analyzer supports I2C (Inter-Integrated Circuit) and SPI (Serial Peripheral Interface). It can also analyse MDIO (Management Data Input/Output) traffic.
The Beagle I2C/SPI Analyzer can monitor SPI at up to 24 MHz and I2C at up to 4 MHz.
Yes. The Beagle I2C/SPI Analyzer works with Windows, Linux and macOS.
Yes. The Beagle I2C/SPI Analyzer can capture and display partial data packets, which helps when debugging complex issues or interrupted communications.
No questions match your search.