Key Features
Overview
The SEGGER Flasher Hub-4 is an advanced control module designed for high-volume production environments requiring parallel flash programming capabilities. This ultra-compact control unit manages multiple Flasher Compact programmers, enabling the simultaneous programming of up to 24 target devices.
Measuring only 125mm x 78mm x 25mm, the Flasher Hub-4 is remarkably space-efficient - just slightly larger than a standard deck of cards. The system operates in two distinct modes: Direct Mode controls up to four Flasher Compact units directly, whilst Flex Mode enables expansion to 24 channels using SEGGER USB Hubs.
Advanced Control Capabilities
Each programming channel can be configured independently through the control module, allowing programming of different devices with unique firmware images, serial numbers, patches, and licences for seamless production integration. The control module coordinates programming operations to achieve speeds very close to the theoretical minimum programming time of the target hardware.
Built-in web and FTP servers enable remote monitoring and control, while integrated Telnet support allows standalone operation without requiring a dedicated PC. All software updates, firmware upgrades, and new device support are provided free of charge, ensuring exceptional long-term value.
Downloads
Why Engineers Choose The SEGGER Flasher Hub-4 Control Module
Centralised Production Control
Space-Efficient Design
Zero Ongoing Costs
| General Information | |
|---|---|
Part Number (SKU) |
5.01.30
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.6 kg
|
| Other | |
EAN |
5055383601219
|
Questions and Answers
-
What Operating Systems Are Supported by the Flasher Hub-4 Control Software?
The Flasher control software runs on Windows, Linux and macOS. -
How Does the Flasher Hub-4 Compare to the Larger Flasher Hub-12?
The Flasher Hub-12 has higher channel capacity. The Hub-4 is more compact and costs significantly less, and still handles up to 24 channels for medium-volume production. -
Can the Flasher Hub-4 Control Module Operate Without a PC Connection?
Yes. The Flasher Hub-4 can run stand-alone, controlled over TELNET, the web interface or FTP through its built-in ASCII command interface. -
What Programming Speeds Does the Flasher Hub-4 Control Module Achieve?
The control module runs SEGGER's flash programming algorithms, which get very close to the theoretical minimum programming time of the target hardware. -
What Technical Support Is Included with the Flasher Hub-4 Control Module?
One year of SEGGER Basic technical support is included. Extended Coverage options add warranty and support periods of 12 or 24 months. -
What Is the SEGGER USB Hub (5.01.10) and What Makes It Different From Standard Consumer USB Hubs?
The SEGGER USB Hub (5.01.10) is an industrial-grade, seven-port USB 2.0 full-speed hub designed for production use. Unlike consumer hubs, it has:
- Upstream port isolation (3kV DC for 1 second)
- Overload protection on each downstream port
- High retention USB-B upstream and USB-A downstream ports
- Testing to EN 61326-1, EN 55011 and EN 55024/55035
It is intended for gang programming with SEGGER Flasher Compact units.
-
How Does the SEGGER USB Hub's Electrical Isolation Feature Protect My Equipment and Personnel?
The upstream port has basic isolation rated at 3kV DC for 1 second. This protects connected equipment and users from ground loops, spikes and transient overvoltages common in industrial environments, and helps prevent damage to development tools and host computers.
It is basic isolation only and is not suitable for hazardous voltage applications without additional protection.
-
What Power Requirements Does the SEGGER USB Hub Have and How Does This Compare to Typical Consumer Hubs?
The SEGGER USB Hub runs from 8-30 VDC with reverse polarity protection, and draws up to 30W. Typical consumer USB hubs need 5V DC. For maximum load, use an input supply of 12 VDC or higher.
The screw-terminal power plug takes solid or stranded wire from 0.2-3.3 mm², for secure connections where there is vibration.
-
Can the SEGGER USB Hub Be Used with non-SEGGER Devices, or Is It Exclusively for SEGGER Products?
Yes. It is optimised for SEGGER Flasher Compact units in gang programming setups, but SEGGER states it can also be used with other SEGGER products such as J-Link debug probes, and with third-party USB devices.
SEGGER recommends it over generic hubs because it is production-grade, tested and electrically isolated.
-
What Are the Environmental Operating Specifications of the SEGGER USB Hub Compared to Premium Industrial Competitors?
- Operating temperature: +5°C to +60°C
- Storage temperature: -20°C to +65°C
- Relative humidity: up to 90% (non-condensing)
- Size: 170mm x 166mm x 35mm
- Weight: 585g without cables
-
How Does the SEGGER USB Hub Enhance Gang Programming Performance Compared to Using Multiple Standard USB Hubs?
The SEGGER USB Hub supports up to 24 Flasher Compact units when used with a Flasher Hub-4 or Flasher Hub-12.
Short USB connections between the hub and the Flasher Compacts improve signal quality and programming reliability. Consumer hubs may not be fully USB-compliant or may lack adequate power, while the SEGGER hub gives consistent performance across all ports at once. Its isolation helps prevent programming errors and equipment damage.
-
What High Retention Connector Features Distinguish the SEGGER USB Hub From Standard USB Hubs?
The hub has high retention USB-B upstream and USB-A downstream ports. They need more force to disconnect than standard USB ports, so vibration, cable movement or accidental contact is less likely to interrupt a programming run. -
How Does the SEGGER USB Hub's Compliance with Industrial Standards Benefit Users in Production Environments?
The hub is tested to EN 61326-1, EN 55011 and EN 55024/55035. These standards cover electromagnetic compatibility (EMC) and electrical safety for measurement, control and laboratory equipment.
In practice, the hub won't generate interference that affects sensitive equipment, and isn't easily disturbed by EMI from nearby machinery. This reduces interference-related downtime and helps you meet regulatory requirements in manufacturing.
-
What Are the Cost Benefits of Choosing the SEGGER USB Hub Versus Multiple Cheaper Consumer Alternatives?
The SEGGER USB Hub costs more up front than consumer hubs, but its total cost of ownership is lower in production. Its industrial construction, electrical isolation and compliance testing help prevent downtime, equipment damage and programming failures, and reduce replacements. It also gives consistent performance across all ports for gang programming, which multiple cheaper hubs may not. -
How Does the SEGGER USB Hub Integrate with Automated Test Equipment and Production Lines?
The hub is designed for automated test equipment (ATE) and production lines. Its wide operating temperature range and EMC compliance suit industrial settings, and its electrical isolation protects ATE equipment from ground loops and electrical transients.
With a SEGGER Flasher Hub, programming can be controlled over TELNET, the web interface or FTP without a dedicated PC, which suits unattended, lights-out manufacturing.
-
How Many Flasher Compact Units Can Be Controlled by the Flasher Hub-4?
The Flasher Hub-4 controls up to 4 Flasher Compact units in Direct Mode, and up to 24 in Flex Mode using SEGGER USB Hubs. Each Flasher Compact works as an independent programmer controlled by the Hub-4. -
What Interfaces Does the Flasher Hub-4 Control Module Support for System Integration?
The Flasher Hub-4 has:
- Ethernet
- USB Type-B upstream
- USB Type-A downstream
- RS232 9-pin
- TELNET
- Built-in emWeb and emFTP servers
These support connection to automated test equipment.
-
Can Each Programming Channel Be Configured Independently Through the Control Module?
Yes. Each channel can program a different target device with its own firmware image, serial numbers, patches or licences, or all channels can run identical gang programming. -
What Are the Physical Dimensions of the Flasher Hub-4 Control Module?
The Flasher Hub-4 measures 125mm wide, 78mm deep and 25mm high, so it fits easily into production setups with limited space. -
Does the Flasher Hub-4 Control Module Require Additional Licensing for New Device Support?
No. SEGGER provides all software updates, firmware upgrades and new flash loaders free of charge, with no licence costs or hidden fees.
No questions match your search.