Xeltek SA015A1T 32-Pin PLCC Socket Adapter

The Xeltek SA015A1T is a 32-pin PLCC programmer adapter (socket adapter for PLCC32, 1.27 mm pitch, 11 x 14 mm body) with an opentop socket. It is an SA-series adapter for Xeltek's 48-pin-driver SuperPro programmers, including the SuperPro M, and Xeltek's device lists assign it to PLCC32 EPROM and flash such as the AMD AM27C010 and AM29F040.

PLCC32 Opentop Socket at 1.27 mm Pitch

The SA015A1T takes the standard PLCC32 package: 32 leads at 1.27 mm pitch on an 11 x 14 mm body. The socket is opentop: it has no lid, and the chip is pushed into the socket. Xeltek notes that opentop sockets need force to seat the chip and are the better fit for automated handling. One adapter serves every device the SuperPro software maps to it, so a bench that programs several PLCC32 parts needs only the one SA015A1T.

Which SuperPro Programmers Take SA Adapters

Xeltek lists the SA series for its 48-pin-driver SuperPro programmers: the SuperPro 610P and 611S, and older models including the SuperPro M, 601S, 600P, 501S, 500P, 3000U, 580U and 280U. Of the programmers we sell, the SuperPro M is the one that takes SA adapters. For the 144-pin SuperPro 6000 and 6000E, Xeltek lists the CX series instead, so check your part in the SuperPro device list, or send us the part number, before pairing the SA015A1T with either of those.

Typical PLCC32 Devices

Xeltek's SuperPro device lists name the SA015A1T for PLCC32 parts including the AMD AM27C010, AM27C020, AM27C040, AM29F010 and AM29F040, and the ACTRANS AC39LV010. Typical jobs are reading and reprogramming socketed firmware on older boards and programming replacement PLCC32 parts for repair.

Specifications

Limitations

• PLCC32 only. Other PLCC sizes need their own adapter (see the comparison below).
• Not an in-system programming tool: the device must be removed from the board and placed in the socket.
• The adapter is socket hardware only. Device support comes from the SuperPro software on the programmer.

Xeltek PLCC Adapters Compared

Order the Xeltek SA015A1T from £125.40 ex VAT. Send us your device part number and programmer model if you want the adapter match confirmed before you order. See the full Xeltek range.

Frequently Asked Questions

Does the SA015A1T Work with the SuperPro 6000 or 6000E?

Xeltek does not list it for them. Xeltek assigns SA adapters to its 48-pin-driver programmers and CX adapters to the SuperPro 6000 and 6000E, so confirm your device in the SuperPro device list first.

Answered by John Legg, Director, Debug Store

Which Package Does the SA015A1T Accept?

PLCC32: 32 leads at 1.27 mm pitch on an 11 x 14 mm body, in an opentop socket.

Answered by John Legg, Director, Debug Store

How Do I Check That My Chip Uses the SA015A1T?

Look the part up in the SuperPro software, where each device entry names the adapter it needs, or in Xeltek's Device Search, which returns the programmer and adapter for a device part number.

Answered by John Legg, Director, Debug Store

Last reviewed: 30 October 2026