
Overview
The Riverdi Click Board™ is an adapter for connecting Riverdi TFT displays to a mikroBUS socket. The onboard ZIF-20 connector allows you to interface between the target MCU and an FT8xx graphic controller on Riverdi displays. The Click Board™ runs on either a 3.3V or 5V power supply.
The Riverdi Click Board™ is an adapter for connecting Riverdi TFT displays to a mikroBUS socket. The onboard zif20 connector allows you to interface between the target MCU and an FT8xx graphic controller on Riverdi displays. The click runs on either a 3.3V or 5V power supply.
Note: The Riverdi Click Board™ comes with a flat flexible cable for the onboard ZIF20 connector.
RIVERDI TFT DISPLAYS
We have more than 20 Riverdi TFT displays available, in different sizes, from 7'' to 2.8'' screens. Choose from a wide variety of frames – metal mounting frames for industrial use to the white bezel for homes and offices, and many more.
I2C/SPI INTERFACE
Riverdi click can have either an I2C or an SPI interface. A set on onboard jumpers allows you to switch between these communication lines.
SPECIFICATIONS
| Type | Adapter, Displays, TFT |
| Applications | Interfacing Riverdi HMI displays with mikroBUS™ compatible development boards |
| On-board modules | ZIF20 connector. FT8xx graphic controller |
| Key Features | SPI/I2C interface with selection jumpers |
| Interface | GPIO,I2C,SPI |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on the Riverdi Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin | ![]() |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| Reset | RST | 2 | RST | INT | 15 | INT | Interrupt |
| Chip select | CS | 3 | CS | TX | 14 | NC | |
| SPI clock | SCK | 4 | SCK | RX | 13 | NC | |
| Master input slave output | MISO | 5 | MISO | SCL | 12 | SCL | SCL I2C line |
| Master output slave input | MOSI | 6 | MOSI | SDA | 11 | SDA | SDA I2C line |
| Power supply | +3.3V | 7 | 3.3V | 5V | 10 | +5V | Power supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
JUMPERS AND SETTINGS
| Overview | |
|---|---|
| Category | TFT, Displays, Adapter |
| Applications | Interfacing Riverdi HMI displays with mikroBUS™ compatible development boards |
| Key components | |
| On-board modules | zif20 connector. FT8xx graphic controller |
| Features | |
| Key features | SPI/I2C interface with selection jumpers |
| Interfaces | |
| Interface | GPIO, SPI, I2C |
| Compatibility | mikroBUS™ |
| Electrical | |
| Input voltage | 3.3V or 5V |
| Physical | |
| Click board size | S (28.6 x 25.4 mm) |
| Compliance | |
| Country of origin | Serbia |
| RoHS | Compliant |
| Ordering information | |
| Part number (SKU) | MIKROE-2100 |
| Manufacturer | Mikroelektronika d.o.o. |
| EAN | 8606015079080 |
| Warranty | 12 months |
| Shipping weight | 0.022 kg |
-
1 ×
Riverdi Click Board™
Contact us to confirm the full contents of the box.
Questions and Answers
No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.
