Product Description
The WiFi 7 Click Board™ is based on the Atmel ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, INT, RST.
ATWINC1510-MR210PB Features
The ATWINC1510-MR210PB is a low-power consumption 802.11 b/g/n module which is specifically optimized for low-power IoT applications.
The module has a Cortus APS3 32-bit processor. This processor performs many of the MAC functions, including but not limited to association, authentication, power management, security key management, and MSDU aggregation/de-aggregation. In addition, the processor provides flexibility for various modes of operation, such as STA and AP modes.
MODULE CURRENT CONSUMPTION
The table below describes the current consumption of the ATWINC1510-MR210PB module:
| Device state |
Code rate |
Output power, dBm |
Current consumption(1) |
| IVBATT |
IVDDIO |
| ON_Transmit |
802.11b 11Mbps |
20.5 |
290mA |
22mA |
| 802.11b 11Mbps |
19.5 |
294mA |
22mA |
| 802.11g 6Mbps |
19.5 |
292mA |
22mA |
| 802.11b 54Mbps |
17.5 |
250mA |
22mA |
| 802.11n MCS 0 |
18.0 |
244mA |
22mA |
| 802.11n MCS 7 |
15.5 |
289mA |
22mA |
| ON_Receive |
802.11b 1Mbps |
N/A |
52.5mA |
22mA |
| 802.11b 11Mbps |
N/A |
52.5mA |
22mA |
| 802.11g 6Mbps |
N/A |
55.0mA |
22mA |
| 802.11b 54Mbps |
N/A |
57.5mA |
22mA |
| 802.11n MCS 0 |
N/A |
54.0mA |
22mA |
| 802.11n MCS 7 |
N/A |
58.5mA |
22mA |
| ON_Doze |
N/A |
N/A |
380µA |
<3.5µA |
| Power_Down |
N/A |
N/A |
<0.5µA |
<3.5µA |
ADDITIONAL PINS
Additional pins on the WiFi 7 Click Board™, besides the ones on the mikroBUS™ line:
