Mikroelektronika d.o.o.
SKU: MIKROE-1685Clicker Board 2 for STM32
Clicker Board 2 for STM32
Couldn't load pickup availability
Put together different Click Boards™ and invent fully-functional standalone gadgets with utmost ease using the Clicker 2 Board™ for STM32. This Clicker 2 Board™ board is a fast and compact Click Board™ two-seater equipped with STM32F407VGT6 32-bit ARM Cortex-M4 microcontroller and two MikroBUS host sockets to provide the user with unlimited possibilities to come up with new and original inventions.
The microcontroller is preprogrammed with a fast USB HID MikroBootloader. However, programming the microcontroller can be also done using an external MikroProg for STM32 programmer and MikroProg Suite for ARM software, or using the ST-LINK V2 programmer and MikroProg Suite for ARM software. It comes with onboard LTC3586-2 power management and battery charger IC that provides an independent, steady power supply to the microcontrollers RTC from the li-polymer battery or USB even when the user pushes the reset button or toggle the On/Off switch.
This pocket-sized board features the same pair of 1x26 connection pads as mikroMedia™ boards. The MikroBUS host connectors consist of two 1'.
Technical Specifications
Thousands of possibilities with click boards. With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 1000 add-on boards. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is halfway done. Go ahead and play with a few ideas right away.
Programming.To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for STM32 connector enables programming through external programmer/debugger.
Power Management.Clicker 2 for STM32 features LTC®3586, a highly integrated power management and battery charger IC that includes a current-limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.
Powering Your Inventions
Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a charger for the li-po battery. It can also maintain an independent power supply to the MCU's RTC even when you push the RESET button or toggle the ON/OFF switch.
Processor
- STM32F407VGT6 (ARM Cortex-M4)
- 1024kB Flash, 192kB RAM
- 168MHz operation
Connectivity
- 52 programmable GPIOs
- 2 mikroBUS host sockets
- USB MINI-B connector
Expanding Your Ideas
No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.
HID Bootloader Inside
To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
Hardware Debugging
Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for STM32®. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our ARM® compilers.
HID Bootloader Inside
To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
Clicker Board 2 for STM32
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.