Micsig
Micsig GEN5 Tablet Oscilloscope ETO3000 Series - 350MHz/500MHz 4-Channel
Micsig GEN5 Tablet Oscilloscope ETO3000 Series - 350MHz/500MHz 4-Channel
SKU: ETO3504
Couldn't load pickup availability
Key Features
Overview
The Micsig GEN5 Tablet Oscilloscope ETO3000 series represents the latest evolution in portable test instrumentation, combining desktop oscilloscope capabilities with tablet convenience. These 4-channel instruments deliver professional measurements with 350MHz or 500MHz bandwidth, 3GSa/s sampling rates, and exceptional 360Mpts memory depth. The 14-inch high-resolution touchscreen and dedicated SigtestUI™ operating system provide intuitive operation whether in laboratory or field environments.
Built for engineers who demand portability without sacrificing performance, the ETO series features a ruggedised design with integrated battery providing over 5 hours continuous operation. The Mic-OPI™ probe interface automatically recognises connected probes and enables one-click calibration, eliminating setup time and measurement errors.
Available in two bandwidth variants, the ETO3504 (350MHz) and ETO5004 (500MHz) share identical features including ultra-low noise performance, comprehensive triggering options, and extensive connectivity. For related portable test solutions, consider our logic analysers and protocol analysers for comprehensive signal debugging capabilities.
Downloads
Why Engineers Choose The Micsig GEN5 Tablet Oscilloscope ETO3000 Series - 350MHz/500MHz 4-Channel
Exceptional Portability
Ultra-Low Noise Floor
Intuitive Operation
Professional 4-Channel Tablet Oscilloscope for Field and Laboratory Use
The Micsig GEN5 Tablet Oscilloscope ETO3000 series delivers professional-grade signal analysis in a portable 14-inch tablet format. Available in 350MHz (ETO3504) and 500MHz (ETO5004) variants, these instruments combine desktop oscilloscope performance with field-portable convenience.
Ultra-Low Noise Floor Performance
Achieve precise measurements with noise floor less than 90μVrms even at full 500MHz bandwidth. This exceptional noise performance enables accurate capture of weak signals during circuit debugging and troubleshooting applications.
Deep Memory and High Capture Rate
| Parameter | ETO3504 | ETO5004 |
|---|---|---|
| Bandwidth | 350MHz | 500MHz |
| Sampling Rate | 3GSa/s | 3GSa/s |
| Memory Depth | 360Mpts | 360Mpts |
| Waveform Capture Rate | 230,000wfms/s | 230,000wfms/s |
SigtestUI™ Multitasking Operating System
The dedicated SigtestUI™ operating system provides intuitive touchscreen operation optimised for oscilloscope functions. Navigate complex measurements and analysis tools with tablet-like simplicity whilst maintaining professional measurement accuracy.
Field-Ready Design Features
- Built-in 13,500mAh Li-ion battery for 5+ hours continuous operation
- VESA 75mm×75mm mounting compatibility for flexible installation
- Anti-glare 14-inch display (1920×1200 resolution)
- Soft rubber protection for harsh environments
- Power-off lock for secure transport
Comprehensive Connectivity
Multiple interfaces support diverse measurement scenarios:
- USB 3.0/2.0 Host and Device connections
- USB Type-C for modern device compatibility
- HDMI output for external displays or presentations
- Trigger output for synchronisation
- 32GB internal storage for waveform data
Advanced Triggering and Analysis
Professional trigger modes include edge, pulse width, logic, Nth edge, runt, slope, and timeout triggers. Built-in serial bus decoding supports RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, and MIL-STD-1553B protocols.
Digital Filtering and Mathematical Functions
Hardware digital filtering operates down to 30Hz, effectively removing interference whilst preserving signal integrity. Advanced mathematical functions include FFT analysis, custom formula support, and segmented storage for up to 10,000 events.
Questions and Answers
-
What Noise Performance Does the ETO Series Offer?
Micsig quotes a noise floor below 90μVrms even at the full 500MHz bandwidth (ETO5004). That helps when you measure weak signals.
-
Is the Touchscreen Suitable for Outdoor Field Work?
It suits field work within its limits. The 14-inch 1920×1200 touchscreen has an anti-glare coating, and the body has soft rubber protection. The operating range is 0 to 45°C at 5 to 85% relative humidity, and the oscilloscope has no published drop or ingress rating, so protect it from rain and knocks.
-
What Mathematical Analysis Functions Are Available?
The ETO series supports FFT analysis, custom formulas and waveform calculations. Segmented storage captures up to 10,000 events for analysis.
-
Can Multiple ETO Oscilloscopes Be Synchronised for Multi-channel Analysis?
The ETO has a trigger output port. Micsig doesn't describe using it to synchronise several oscilloscopes, so check the manual before relying on it. If you need more than 4 channels, consider our modular oscilloscope systems.
-
What Probe Types Are Compatible with the ETO Series?
Micsig probes connect through the Mic-OPI™ interface, which automatically matches the attenuation ratio and compensation for the probe. Conventional passive probes connect via the supplied BNC adapter.
-
What Is the Difference Between the ETO3504 and ETO5004 Models?
Bandwidth: the ETO3504 is 350MHz and the ETO5004 is 500MHz. Rise time also differs (≤1ns on the 350MHz model, ≤0.7ns on the 500MHz model). Both have 4 channels, up to 3GSa/s sampling rate, up to 360Mpts memory depth and a 14-inch touchscreen.
-
How Does the Mic-OPI™ Probe Interface Improve Measurement Accuracy?
Mic-OPI™ automatically matches probe attenuation and compensation. That reduces errors from incorrect probe settings and saves manual compensation.
-
What Is the Battery Life for Field Operation?
The built-in battery is a 7.4V 13,500mAh Li-ion pack. Micsig doesn't publish a runtime, so ask us if battery life is critical for your work. The power-off lock prevents accidental switch-on during transport.
-
Can the ETO Series Decode Serial Communication Protocols?
Yes. The ETO series has built-in decoding for:
- RS-232/422/485/UART
- CAN and CAN FD
- LIN
- SPI
- I²C
- ARINC-429
- MIL-STD-1553B
-
What Connectivity Options Are Available for Data Transfer?
The ETO series provides:
- USB 3.0/2.0 Host port
- USB Type-C
- HDMI output
- 32GB internal storage
These support file transfer, an external display and remote operation.
No questions match your search.