Tag-Connect, LLC
Tag-Connect TC-XILINX6-M Xilinx 14-pin to 6-pin Adapter
Tag-Connect TC-XILINX6-M Xilinx 14-pin to 6-pin Adapter
SKU: TC-XILINX6-M
Couldn't load pickup availability
Key Features
Overview
The Tag-Connect TC-XILINX6-M simplifies connecting Xilinx 14-pin 2mm programmer cables (like Digilent JTAG-HS2/HS3) to a minimal 6-pin footprint using the TC2030-IDC interface. Its primary role is for FPGA and CPLD in-system programming or debugging during design, prototype, or low-volume production. The adapter enables fast switching between boards without repeated cable insertions and minimises physical PCB footprint. It is part of the broader Tag-Connect line of programming accessories, alongside similar solutions such as the TC2050-XILINX-M (for 10-pin cables) and TC-XILINX6 (male version for USB II cables). See all related adapters at the Tag-Connect DSP/FPGA/CPLD Adapters catalogue or browse the complete Tag-Connect collection for alternative options.
Tag-Connect TC-XILINX6-M Overview
The Tag-Connect TC-XILINX6-M is designed to bridge a female 2mm 14-pin header, common on Xilinx programming cables like Digilent JTAG-HS2/HS3, to a standard 6-pin 0.1" (2.54mm) TC2030-IDC Plug-of-Nails™ header. This enables direct connection to compact “No Legs” and “With Legs” TC2030 cables for PCB programming, diagnostic access, or test point minimisation on high-density circuit boards.
Main Applications
- Programming and debugging Xilinx FPGAs and CPLDs using Digilent JTAG-HS2, HS3, and similar cables
- Ideal for boards requiring a minimal 6-pin Tag-Connect connector footprint
- Works with TC2030-IDC Plug-of-Nails™ cables (sold separately)
Pinout Table
| TC2030 Pin | Signal |
|---|---|
| 1 | VREF* |
| 2 | TMS / SS / PROG |
| 3 | TDI / MOSI / DIN |
| 4 | TCK / SCLK / CCLK |
| 5 | GND* |
| 6 | TDO / MISO / DONE |
Wiring Quick-Start
- Plug the TC-XILINX6-M adapter into the 2mm, 14-pin header on your Xilinx-compatible programmer cable.
- Attach your TC2030-IDC or TC2030-IDC-NL cable to the 6-pin 0.1” header on the adapter.
- Connect to the matching target PCB Tag-Connect footprint.
Fits digital debugging and in-system programming applications for compact and production boards.
Compatible Tag-Connect Cables & Accessories
- TC2030-IDC (“With Legs” spring-loaded pin cable)
- TC2030-IDC-NL (“No Legs” for hand-held use or clip retention system)
- TC2030-CLIP or mini PCB retention jigs for “NL” cables
Example Ready-to-Run Connection (JTAG, SRST, and Power/Ground)
Programmer Cable (2mm, 14-pin) → TC-XILINX6-M → TC2030-IDC → PCB Tag-Connect footprint | General Information | |
|---|---|
Part Number (SKU) |
TC-XILINX6-M
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.1 kg
|
| Other | |
Warranty |
|
HS Code Customs Tariff code
|
|
EAN |
5055383665136
|
Frequently Asked Questions
Have a Question?
-
Does it need any drivers or software?
No drivers are required; it’s purely a passive hardware adapter.
-
Is it compatible with non-Tag-Connect programming cables?
Its output is 6-pin 0.1” and suits only TC2030-IDC compatible harnesses.
-
How is pinout mapped from Xilinx to Tag-Connect?
The adapter follows standard JTAG signal mapping; label references and tables are included in the section above.
-
Can this be used for production programming?
Yes, it suits both prototyping and low-to-medium volume production.
-
Will this adapter fit the Xilinx Platform Cable USB II DLC10?
No, the Platform Cable USB II DLC10 needs the male-header TC-XILINX6 adapter instead.
-
Is a Tag-Connect cable included?
No, only the adapter is supplied. Cables must be purchased separately.
-
Can the TC-XILINX6-M be used with “No Legs” Tag-Connect cables?
Yes, it works with both TC2030-IDC (with legs) and TC2030-IDC-NL (no legs) cables.
-
Which programming cables is this adapter compatible with?
It works with digilent JTAG-HS2, JTAG-HS3, and other Xilinx-compatible cables using a female 14-pin header.
-
What does the TC-XILINX6-M adapter do?
It converts a standard Xilinx 2mm 14-pin JTAG connector to a compact 6-pin 0.1” TC2030-IDC interface for easy board access.