Total Phase, Inc
Ensemble de modules de test de câbles avancés - USB-C
Ensemble de modules de test de câbles avancés - USB-C
Prix habituel
€2.027,95 EUR
hors taxes
Prix habituel
Prix promotionnel
Prix unitaire
par
€2.027,95 EUR
hors taxes
Frais d'expédition calculés à l'étape de paiement.
Check Availability before Ordering
Impossible de charger la disponibilité du service de retrait
Overview
Le Pack USB-C ACT comprend les modules suivants :
- Testeur de câble avancé v2 Module USB Type-C vers USB Type-C
- Testeur de câbles avancé v2 Module USB Type-C vers USB Standard-A
- Testeur de câble avancé v2 Module USB Type-C vers USB Micro-B
- Testeur de câbles avancé v2 Module USB Type-C vers USB Standard-B
- Individually measure the DC resistance of VBUS and GND wires
- Individually measure the DC resistance of VBUS and GND pins in the USB Type-C connector
- Verify wiring is correct with no shorted or disconnected wires
- Testing of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps.
- This is all you will need for testing USB Type-C cables, whether USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2
Test Compatibility/Coverage
- USB 3.2/3.1/3.0/2.0
- PD 2.0, PD 3.0
- Short testing - Dynamic visualization of test results
- Open testing - Dynamic visualization of test results
- Continuity testing - Dynamic visualization of test results
- DC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires, continuity check only on high-speed data lines
- Signal integrity testing of data lines to 12.8 Gbps per channel
- E-Marker verification
-->