Mikroelektronika d.o.o.
Accel 30 Click Board
Accel 30 Click Board
Couldn't load pickup availability
Key Features:
- Low power consumption, low noise, selectable full-scale acceleration, configurable host interface, high resolution, various operating modes, interrupt, programmable sample rate, and more
- Based on the MC3635 - digital triaxial acceleration sensor from MEMSIC
- Can be used for consumer product motion sensing, user interface control, gaming, electronic compass tilt compensation, and more
- mikroBUS: I2C and SPI Interfaces
Introducing the Accel 30 Click Board™ - Your Ultimate Solution for Motion Sensing and More
Looking for a compact and versatile add-on board for your electronic projects? Look no further than the Accel 30 Click Board™. With its advanced acceleration sensor, this board is the perfect solution for consumer product motion sensing, user interface control, gaming, electronic compass tilt compensation, and much more.
The MC3635: Ultra-Low Power, High-Performance Acceleration Sensor
At the heart of the Accel 30 Click Board™ lies the MC3635, an integrated digital output 3-axis accelerometer from MEMSIC. This powerful sensor offers selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, ±12g, or ±16g in three axes, with a configurable host interface that supports both SPI and I2C serial communication.
With its high-resolution, low-power operating modes and interrupt feature for various events, the MC3635 offers maximum flexibility to meet multiple use case needs. Whether you're working on a consumer product, a gaming application, or a complex electronic system, the MC3635 is the perfect choice for accurate and reliable motion sensing.
Easy Software Development with mikroSDK Compliance
To make your software development process even easier, the Accel 30 Click Board™ is supported by a mikroSDK compliant library. This library includes a range of functions that simplify software development, so you can focus on building your application rather than worrying about the technical details.
Get Started with the Fully Tested Accel 30 Click Board™ Today
The Accel 30 Click Board™ comes as a fully tested product, ready to be used on any system equipped with the mikroBUS™ socket. Whether you're a professional developer or a hobbyist, this board offers the perfect combination of performance, flexibility, and ease of use. So why wait? Start building your next electronic project with the Accel 30 Click Board™ today!
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398850783.jpg?v=1684954742&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398916319.jpg?v=1684954740&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398621407.jpg?v=1684954730&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398490335.jpg?v=1684954923&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398588639.jpg?v=1684954739&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398883551.jpg?v=1684954733&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398654175.jpg?v=1684954909&width=1445)
![Mikroelektronika d.o.o. MIKROE-5550 Accel 30 Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-accel-30-click-board-39623398523103.jpg?v=1684954904&width=1445)
How Does The Accel 30 Click Board™ Work?
The Accel 30 Click Board™ is based on the MC3635, a highly reliable digital triaxial acceleration sensor from MEMSIC. The MC3635 is highly configurable with a programmable acceleration range of ±2g, ±4g, ±8g, ±12g, or ±16g, and an internal sample rate from 14 to 1300 samples/second. It contains a 12-bit 32-sample FIFO with a programmable watermark and can be put into several operational modes, such as Sleep/Standby/Sniff/Swake/Cwake/Trig, depending upon the desired sensing application. In addition to all these features, the MC3635 is characterized by excellent temperature stability, low noise, and low power consumption.
The Accel 30 Click Board™ allows using both I2C and SPI interfaces at a maximum frequency of 1MHz for I2C and 8MHz for SPI communication. Selection is made by positioning SMD jumpers marked COMM SEL to the appropriate position. All jumpers must be on the same side, or the Click board™ may become unresponsive. When the I2C interface is selected, the MC3635 allows the choice of its I2C slave address, using the ADDR SEL SMD jumper set to an appropriate position marked 0 and 1. In addition to communication pins, this board also possesses an additional interrupt pin, routed to the INT pin on the mikroBUS™ socket, to signal MCU that an event, such as specific tap or sample acquisition conditions, has happened.
The Accel 30 Click Board™ can only be operated with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type | Acceleration,Motion |
Applications | Can be used for consumer product motion sensing, user interface control, gaming, electronic compass tilt compensation, and more |
On-board modules | MC3635 - digital triaxial acceleration sensor from MEMSIC |
Key Features | Low power consumption, low noise, selectable full-scale acceleration, configurable host interface, high resolution, various operating modes, interrupt, programmable sample rate, and more |
Interface | I2C,SPI |
Compatibility | mikroBUS |
Click board size | S (28.6 x 25.4 mm) |
Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | ![]() |
Pin | Notes | |||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | INT | Interrupt | |
SPI Chip Select | CS | 3 | CS | RX | 14 | NC | |
SPI Clock | SCK | 4 | SCK | TX | 13 | NC | |
SPI Data OUT | SDO | 5 | MISO | SCL | 12 | SCL | I2C Clock |
SPI Data IN | SDI | 6 | MOSI | SDA | 11 | SDA | I2C Data |
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
JP1 | ADDR SEL | Right | I2C Address Selection 0/1: Left position 0, Right position 1 |
JP2-JP4 | COMM SEL | Right | Communication Interface Selection SPI/I2C: Left position SPI, Right position I2C |
ACCEL 30 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | - | 3.3 | - | V |
Acceleration Range | ±2 | - | ±16 | g |
Acceleration Resolution | 8 | 10 | 12 | bits |
Sensitivity | 8 | - | 4096 | LSB/g |
Sample Rate | 14 | - | 1300 | samp/sec |
Software Support
Software Support
We provide a library for the Accel 30 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Accel 30 Click Board™ driver.
Key functions
-
accel30_get_axis
Accel 30 get accel data function. -
accel30_set_resolution_ctrl
Accel 30 set resolution control function. -
accel30_set_mode
Accel 30 set operating mode function.
Example Description
This library contains API for the Accel 30 Click Board™ driver. The library initializes and defines the I2C or SPI bus drivers to write and read data from registers. The library also includes a function for reading X-axis, Y-axis, and Z-axis data.
void application_task ( void )
{
static accel30_axis_t axis;
if ( ACCEL30_OK == accel30_get_axis( &accel30, &axis ) )
{
log_printf( &logger, "tX : %d rntY : %d rntZ : %d rn", axis.x, axis.y, axis.z );
log_printf( &logger, "------------------------rn" );
}
Delay_ms( 1000 );
}
The complete application code, and ready-to-use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Accel30
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. A UART terminal is available in all MikroE compilers.
MIKROSDK
The Accel 30 Click Board™ is supported with mikroSDK - MikroE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Accel 30 Click Board
Frequently Asked Questions
Ask a Question-
Is the Accel 30 Click Board™ ready to use out of the box?
Yes, the Accel 30 Click Board™ comes as a fully tested product, ready to be used on any system equipped with the mikroBUS™ socket. Whether you're a professional developer or a hobbyist, this board offers the perfect combination of performance, flexibility, and ease of use.
-
The MC3635 offers high-resolution, low-power operating modes and an interrupt feature for various events, providing maximum flexibility to meet multiple use case needs. This makes it an ideal choice for accurate and reliable motion sensing, whether you\'re working on a consumer product, a gaming application, or a complex electronic system.
Yes, software development is made easier with the Accel 30 Click Board™ thanks to its mikroSDK compliant library. This library includes a range of functions that simplify software development, allowing developers to focus on building their application rather than worrying about the technical details.
-
What makes the MC3635 a good choice for motion sensing?
The MC3635 offers high-resolution, low-power operating modes and an interrupt feature for various events, providing maximum flexibility to meet multiple use case needs. This makes it an ideal choice for accurate and reliable motion sensing, whether you're working on a consumer product, a gaming application, or a complex electronic system.
-
What is the MC3635?
The MC3635 is an integrated digital output 3-axis accelerometer from MEMSIC, which is the heart of the Accel 30 Click Board™. It offers selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, ±12g, or ±16g in three axes, with a configurable host interface that supports both SPI and I2C serial communication.
-
What is the Accel 30 Click Board™?
The Accel 30 Click Board™ is a compact and versatile add-on board designed for electronic projects. It features an advanced acceleration sensor, making it a perfect solution for motion sensing in consumer products, user interface control, gaming, electronic compass tilt compensation, and more.
![banner Image](http://thedebugstore.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_medium.gif)