Mikroelektronika d.o.o.
EasyPIC v8 for PIC24/DSPIC33 Development Board
EasyPIC v8 for PIC24/DSPIC33 Development Board
Couldn't load pickup availability
The EasyPIC v8 for PIC24/dsPIC33 is a development board designed for the rapid development of embedded applications based on Microchip's 16-bit PIC24/dsPIC33 microcontrollers (MCUs). It offers a set of standard features, as well as some new and unique features, typical for the 8th generation of development boards: CODEGRIP - programming and debugging over the WiFi network, the connectivity provided by new, improved USB-C connectors, support for a wide range of different MCUs, and more.
The development board is designed to have everything that you might need for the application development: a highly advanced programmer/debugger module, a reliable power supply module, a massive set of connectivity options including USB (HOST/DEVICE), USB to UART, CAN, LIN, etc.
The EasyPIC v8 for PIC24/dsPIC33 board offers several different DIP sockets, covering a wide range of 16-bit PIC24/dsPIC33 MCUs, from the smallest MCU devices with only 14 pins, all the way up to 28-pin ones. The development board supports the well-established mikroBUS™ connectivity standard, offering five mikroBUS™ sockets, allowing access to a vast base of Click boards™, growing on a daily basis.
![Mikroelektronika d.o.o. MIKROE-4750 EasyPIC v8 for PIC24/DSPIC33 Development Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-development-board-easypic-v8-for-pic24-dspic33-development-board-30412745113789.jpg?v=1685224723&width=1445)
![Mikroelektronika d.o.o. MIKROE-4750 EasyPIC v8 for PIC24/DSPIC33 Development Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-development-board-easypic-v8-for-pic24-dspic33-development-board-30412690096317.jpg?v=1685086319&width=1445)
![Mikroelektronika d.o.o. MIKROE-4750 EasyPIC v8 for PIC24/DSPIC33 Development Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-development-board-easypic-v8-for-pic24-dspic33-development-board-30412720832701.jpg?v=1685085781&width=1445)
ON-BOARD PROGRAMMER-DEBUGGER
CODEGRIP USB Programmer & Debugger
Programming & debugging for Microchip's popular 16-bit PIC24/dsPIC33 MCUs, from the smallest MCU devices with only 14 pins to the powerful 28-pin ones.
CODEGRIP Suite
CODEGRIP Suite as a powerful software suite offers complete control over the EasyPIC v8 for PIC24/dsPIC33 development board. It is used to intelligently manage programming tasks, as well as various other options and settings of the development board.
Plug&Play: No USB driver needed
Without the need for any additional support, USB debugger enables programming/debugging over generic USB driver.
SUPPORT WIDE RANGE OF PIC24/dsPIC33 MCUs
Choose from the wide range 16-bit MCUs
The EasyPIC v8 for PIC24/dsPIC33 is covering a wide range of 16-bit PIC24/dsPIC33 MCUs, from the smallest MCU devices with only 14 pins, all the way up to 28 ones.
Board comes with PIC24F16KA102 and a 8MHz Crystal oscillator.
Six different DIP sockets
Ranging from DIP14 up to DIP28, all DIP sockets allows exclusively placement of MCUs, from the smallest to the largest one. Only a single MCU can be installed into the development board at a time.
Improved quality and design
Surface mounted technology standard enables a sturdy, compact design with improved quality of the sockets and ergonomic design, which allows comfortable project development.
LCD & GLCD/TFT DISPLAY BOARDS
Two Display Connectors
The EasyPIC v8 for PIC24/dsPIC33 development board is equipped with two display connectors, one is a 1x16pin header used for connecting LCD in 4-bit mode.
The second is a single row 20-pin header, which supports monochromatic GLCD with the resolution of 128x64 pixels and EasyTFT Board capable of showing advanced graphical content.
Display graphical or textual content
Two display options allowing even the basic 16-bit PIC24/dsPIC33 MCU devices to utilize them and display graphical or textual content.
One of them is the 2x16-character LCD module which requires minimal processing power from the host MCU for its operation. The other option is familiar GLCD based on the KS108 (or compatible) display driver, or if you want to upgrade your application EasyTFT is a perfect choice.
Resistive touch panel
The EasyPIC v8 for PIC24/dsPIC33 provides the required circuitry, allowing the resistive touch panel to be interfaced with the installed MCU.
Resistive touch panel is supported over two separate connectors: one 4-pin flat cable connector (FFC) and one 1x4-pin header.
IDEAL FOR RAPID PROTOTYPING
Rapid prototyping allows the engineer to take the most efficient and effortless way, to envision the design ideas, capabilities and limitations through measurable means. This is the crucial eliminating factor for time to market pressure.
Improved mikroBUS™ sockets
The EasyPIC v8 for PIC24/dsPIC33 offers five improved mikroBUS™ sockets, where you can place any of the 1077 different Click boards™, adding the infinite amount of possibilities with the largest add-on-board selection in the world.
Ready-to-use Click Boards™
With 1077 Click boards™ available, they are the fastest-growing range of add-on-boards in the world, which are standardized by pinout and size.
They enhance rapid development and accelerate time to market. These ready-to-use boards require no additional hardware configuration.
Engineered to deliver the best performances for the used components, they save developers of testing and troubleshooting often associated with the prototyping phase.
Endless modularity
The ready-to-use Click boards™ are saving time and money by offering complete solutions of hardware and software, instead of developing them from scratch.
Choose one of hundreds of Click boards™ out of these categories: mixed signal, wireless connectivity, storage, interface, displays, human-machine interface, adapter, clock and timing, motor control, power management and audio & voice.
FIRST CLASS POWER SUPPLY
State of the art power supply
EasyPIC v8 for PIC24/dsPIC33 offers state of the art power supply with constant power delivery and unprecedented flexibility. The power supply module is carefully designed to regulate, filter and distribute the power noise free.
In addition, it features convenient capacitive POWER and RESET buttons.
Programmable voltage reference
The PSU is able to provide a very accurate, programmable voltage reference (VREF) in the range from 0V to 4.096V. It is very useful for many different applications including A/D and D/A converters, comparators, etc. The MCP4726 DAC is controlled and programmed by the CODEGRIP module, over the I2C interface. The MCP606, a single rail-to-rail operational amplifier is used to provide an additional buffering at the output.
Uninterruptable power supply
Power supply unit supports a wide range of power sources that can be used: External 12VDC, USB-C connector, and a Li-Po/Li-ION battery.
Power OR-ing option is also supported, providing uninterrupted power supply (UPS) functionality when an external or USB power source is used in combination with the battery.
WIFI PROGRAMMING & DEBUGGING
On-board WiFi Programmer & Debugger
The EasyPIC v8 for PIC24/dsPIC33 development board offers globally unique features of 8th generation Mikroe development boards, among which the most innovative is programming & debugging over WiFi. CODEGRIP for PIC24/dsPIC33 is the first ever embedded programmer & debugger over WIFI, integrated into the EasyPIC v8 for PIC24/dsPIC33 development board.
EasyPIC v8 for PIC24/dsPIC33 development board comes with an amazing gift, a free CODEGRIP WiFi license.
Access anywhere, at any time
You can program and debug from all over the world. With unlimited possibilities, you can place your development board in almost any hardly accessible places such as hazardous environment, agricultural settings, and high-rise buildings while still retaining full debugging and programming access.
Technical support wherever you are
WiFi debugging enables technical support directly to your hardware, wherever you are.
If you need the priority technical support, which encompasses consultation, problem analysis, and problem-solving visit Premium Technical Support.
PREMIUM USER EXPERIENCE
Robust by Design
The EasyPIC v8 for PIC24/dsPIC33 development board is 3.2 mm thick, sturdy and durable design eliminates the board from bending when working with it. All the components of the board are produced on surface mounted technology standard, enabling a compact design.
Sturdy on its Feet
Every detail is carefully thought through, from the height-adjustable stand with non-slip pads, to ergonomic design, which allows comfortable project development.
Clear Intuitive Layout
The EasyPIC v8 for PIC24/dsPIC33 features clean and elegant design, allowing the user to instantly understand how to set it up and how to easily tune it according to needs. The development board is divided into several sections, arranged so that all the related interactive components such as switches, buttons and connectors, are logically positioned and grouped together.
EasyPIC v8 for PIC24/DSPIC33 Development Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
![banner Image](http://thedebugstore.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_medium.gif)