Mikroelektronika d.o.o.
VCT Monitor Click Board
VCT Monitor Click Board
Couldn't load pickup availability
The VCT Monitor Click Board™ is a compact add-on board that contains a highly integrated monitoring solution without compromising accuracy. This board features the LTC2990, an I2C configurable high-performance temperature, voltage, and current monitor from Analog Devices. The LTC2990 incorporates a 14-bit ADC and a 10ppm/°C voltage reference to provide sub-millivolt voltage resolution, as well as +1°C accuracy internally and +0.5°C accuracy remotely when making temperature measurements. This Click Board™ is suitable for applications like supply voltage monitoring and remote diode temperature measurement, e.g., in industrial systems where thermal management is crucial for maximizing performance.
The VCT Monitor Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
![Mikroelektronika d.o.o. MIKROE-4353 VCT Monitor Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-vct-monitor-click-board-30221523517629.jpg?v=1685060925&width=1445)
![Mikroelektronika d.o.o. MIKROE-4353 VCT Monitor Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-vct-monitor-click-board-28829443817661.jpg?v=1685060929&width=1445)
![Mikroelektronika d.o.o. MIKROE-4353 VCT Monitor Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-vct-monitor-click-board-28829443883197.jpg?v=1685148412&width=1445)
How Does The VCT Monitor Click Board™ Work?
The VCT Monitor Click Board™ is based on the LTC2990, a high-performance temperature, voltage, and current monitor with the I2C serial interface from Analog Devices. The LTC2990 can be configured to measure many combinations of internal temperature, remote temperature, remote voltage or current, and internal VCC with single or repeated measurements. It fits in systems needing sub-millivolt voltage resolution, 1% current measurement, and 1°C temperature accuracy or any combination of the three.
The input signals are selected with an input MUX, controlled by the control logic block. The control logic uses the mode bits in the control register to manage the sequence and types of data acquisition. The control logic also controls the variable current sources during remote temperature acquisition. The ADC performs the necessary conversion(s) and supplies the data to the control logic for further processing in the case of temperature measurements or routing to the appropriate data register for voltage and current measurements.
Remote measurements are performed on terminals labelled as TEMP and LOAD using multiple ADC conversions and source currents to compensate for sensor series resistance. The LTC2990 is calibrated to yield the correct temperature for a remote diode with an ideality factor of 1.004.
The VCT Monitor Click Board™ is designed to be operated with both 3.3V and 5V logic voltage levels that can be selected via VCC SEL jumper. This allows for both 3.3V and 5V capable MCUs to use the I2C communication lines properly. However, the Click board™ comes equipped with a library that contains easy to use functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type | Current sensor |
Applications | Can be used for applications like supply voltage monitoring and remote diode temperature measurement, e.g., in industrial systems where thermal management is crucial for maximizing performance. |
On-board modules | The VCT Monitor Click Board™ is based on the LTC2990, a high-performance temperature, voltage, and current monitor with the I2C serial interface from Analog Devices. |
Key Features | Low power consumption, high precission |
Interface | I2C |
Compatibility | mikroBUS |
Click board size | M (42.9 x 25.4 mm) |
Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the VCT Monitor Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | ![]() |
Pin | Notes | |||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | NC | ||
NC | 3 | CS | RX | 14 | NC | ||
NC | 4 | SCK | TX | 13 | NC | ||
NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
JP1 | VCC SEL | Left | Power Supply Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
JP2-JP3 | ADDR SEL | Left | I2C Address Selection: Left position 0, Right position 1 |
VCT MONITOR CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | -0.3 | - | 6 | V |
Accuracy (Local) | - | - | ±3.5 | °C |
Accuracy (Remote) | - | - | ±1.5 | °C |
Resolution | - | 14 | - | bits |
Operating Temperature Range | 0 | - | 70 | °C |
Software Support
We provide a library for the VCT Monitor Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
The library contains a basic functions for using the VCT Monitor Click Board™.
Key Functions
float vctmonitor_read_voltage_differential ( void )
- Differential voltage functionfloat vctmonitor_read_current ( void )
- Current functionfloat vctmonitor_read_temperature ( void )
- Temperature function
Example Description
The application is composed of three sections :
- System Initialization - Initializes I2C module
- Application Initialization - Initializes driver init
- Application Task - Reads temperature, current value, and differential voltage every 4 seconds.
- note - We used the next sets for the test: - Power supply - 4V - Current (Load) - 0A to 3A - The temperature reads from the external MMBT3904 sensor
void application_task ( ) { float temperature; float voltage; float current; current = vctmonitor_read_current( ); FloatToStr( current,demo_text ); mikrobus_logWrite( "Current: ",_LOG_TEXT ); mikrobus_logWrite( demo_text,_LOG_TEXT ); mikrobus_logWrite( "mA",_LOG_LINE ); voltage = vctmonitor_read_voltage_differential( ); FloatToStr( voltage,demo_text ); mikrobus_logWrite( "Voltage: ",_LOG_TEXT ); mikrobus_logWrite( demo_text,_LOG_TEXT ); mikrobus_logWrite( "mV",_LOG_LINE ); temperature = vctmonitor_read_temperature(); FloatToStr( temperature, demo_text ); mikrobus_logWrite( "Temperature: ", _LOG_TEXT ); mikrobus_logWrite( demo_text, _LOG_TEXT); mikrobus_logWrite( "C",_LOG_LINE ); mikrobus_logWrite("_________________",_LOG_LINE); Delay_ms( 4000 ); }
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- I2C Library
- Conversions Library
- UART Library
Additional Notes and Information
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The VCT Monitor Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
VCT Monitor Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.