Mikroelektronika d.o.o.
MikroMedia 4 for Tiva Capacitive
MikroMedia 4 for Tiva Capacitive
Couldn't load pickup availability
Build great GUI in no time with our mikromedia 4 for TIVA CAPACITIVE!
This compact development board is designed as a complete solution for rapid development of multimedia and GUI-centric applications. Our newest product is also rich with peripherals and has awesome graphics on a MCU driven 4.3" TFT display. This display is a true-colour display with a capacitive touch panel as the most distinctive feature of the mikromedia 4. The display has a resolution of 480 by 272 pixels, and it can show up to 16.7M colours.
The mikromedia 4 for TIVA CAPACITIVE offers more connectivity, expandability, and state-of-the-art power supply!
This development board can be implemented directly into any project, with no additional hardware modifications required. The powerful 32-bit TM4C129XNCZADI3 microcontroller, produced by Texas Instruments, provides sufficient processing power even for the most demanding tasks.
Because of the fact that with the mikromedia 4 for TIVA CAPACITIVE you can actually develop on & build in the same board, it will truly enable you to appreciate your time. All this adds up to an unrivalled premium user experience!
![Mikroelektronika d.o.o. MIKROE-4174 MikroMedia 4 for Tiva Capacitive - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-smart-display-mikromedia-4-for-tiva-capacitive-29672157806781.jpg?v=1685137426&width=1445)
BUILD GREAT GUI IN NO TIME
Rich with peripherals
Mikromedia 4 for TIVA CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond the multimedia. Two standardized 1x26 pin headers expose the available MCU pins to the user, adding another layer of expandability. By using mikromedia 4 shield, connectivity can be further expanded with several mikroBUS™ sockets, additional connectors, peripherals, and so on.
Awesome graphics on MCU driven TFT
Mikromedia 4 for TIVA CAPACITIVE is a compact development board designed as a complete solution for the rapid development of multimedia and GUI-centric applications. By featuring a 4.3" TFT display with capacitive touch screen driven by the powerful graphics controller that can display the 24-bit color palette (16.7 million colors), along with a DSP-powered embedded sound CODEC IC, represents a perfect solution for any type of multimedia application.
Develop-on & build-in the same board
Mikromedia 4 for TIVA CAPACITIVE is designed as the complete solution which can be implemented directly into any project, with no additional hardware modifications required. At its core, there is a powerful 32-bit TM4C129XNCZADI3 microcontroller, produced by Texas Instruments, which provides sufficient processing power for the most demanding tasks. Four mounting holes at all four corners allow simple installation with mounting screws. For most applications, a nice stylish casing is all that is needed to turn the Mikromedia 4 for TIVA CAPACITIVE development board into a fully functional, high-performance, feature-rich device.
WHAT'S ON BOARD - BACK SIDE
Sound, connectivity & expandibility
Resource-demanding and complex audio processing tasks can be offloaded from the host MCU by utilizing a dedicated audio CODEC IC, labeled as VS1053B. This IC supports many different audio formats, commonly found on various digital audio devices.
This development board is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond the multimedia.
Two standardized 1x26 pin headers expose the available MCU pins to the user, adding another layer of expandability. By using mikromedia 4 shield, connectivity can be further expanded with several mikroBUS™ sockets, additional connectors, peripherals, and so on.
State of the art power supply, Display & Graphic controller
A high-quality 4.3" TFT true-color display with a capacitive touch panel is the most distinctive feature of the mikromedia 4. The display has a resolution of 480 by 272 pixels, and it can display up to 16.7M of colors. The display module is controlled by the internal LCD Controller. The LCD controller consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. Each controller operates independently from the other and only one of them is active at any given time.
The Power Supply Unit (PSU) provides a clean and regulated power, necessary for a proper operation of the mikromedia 4 development board. It is equipped with three different power supply inputs, offering all the flexibility that mikromedia 4 needs.
More connectivity
The microSD card slot allows storing large amounts of data externally, on a microSD memory card. The microSD card detection circuit is also provided on the board.
The host MCU is equipped with the USB peripheral module, allowing simple USB connectivity. Ethernet controller is integrated in TM4C129L(X)NCZAD microcontroller, with variety of useful features.
The RTC peripheral utilizes a separate power supply source, typically a battery. To allow continuous tracking of time, mikromedia 4 is equipped with a button cell battery that maintains RTC functionality even if the main power supply is off.
WHAT'S ON BOARD - FRONT SIDE
Additional sensors and other miscellaneous peripherals
An ambient light sensor (ALS) can be used for dimming the screen intensity in low-light conditions, allowing for the lower power consumption. It can also be used to detect the proximity and turn on the screen or increase its brightness when the user approaches.
An infrared (IR) receiver with the integrated PIN diode and a demodulation section allows simple control over an IR remote controller to be implemented.
The MCP9700A, an integrated low-power linear active thermistor allows measurement of the ambient temperature.
A high-brightness RGB LED option can be used to provide visual feedback in a very simple way.
Headers & On-Off switch
Most of the host MCU pins are routed to the two 1x26 pin headers, making them available for further connectivity. In addition to MCU pins, some additional peripheral pins are also routed to this header.
After a valid power supply source is connected mikromedia 4 can be powered ON. This can be done by a small switch at the right side of the board. A LED indicator labeled as PWR indicates that the mikromedia 4 is powered ON.
MikroMedia 4 for Tiva Capacitive
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.