Mikroelektronika d.o.o.
AnyNet 2G Click Board
AnyNet 2G Click Board
Couldn't load pickup availability
The AnyNet 2G Click Board™ is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage Services for data storage, analyzing and processing.
This Click Board™ provides an easy and secure connection with the AWS over the air (OTA), by utilizing the equipped Quectel M95 module and Eseye ES4623 embedded SIM card, that can work with more than 235 cellular operators from all over the world. AnyNet 2G Click Board™ can be used as an AWS IoT button with almost no configuration.
The AnyNet 2G Click Board™ comes supplied with the start-up package - free Activation through the AWS, unique ID number of the embedded SIM card and six-month cellular connectivity services of up to 5000 messages to the AWS cloud. With the AnyNet 2G Click Board™, users get a unique level of integration with the AWS IoT services.
Note: Before the purchase of AnyNet 2G Click Board™, please contact Eseye and check for the coverage and support of embedded SIM cards from your local provider. Opening an AWS account and subscribing to the Eseye marketplace is mandatory to work with this Click Board™.
![Mikroelektronika d.o.o. MIKROE-2747 AnyNet 2G Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-anynet-2g-click-board-28852985364669.jpg?v=1685172178&width=1445)
![Mikroelektronika d.o.o. MIKROE-2747 AnyNet 2G Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-anynet-2g-click-board-30269392945341.jpg?v=1685205646&width=1445)
![Mikroelektronika d.o.o. MIKROE-2747 AnyNet 2G Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-anynet-2g-click-board-30269392781501.jpg?v=1685207455&width=1445)
![Mikroelektronika d.o.o. MIKROE-2747 AnyNet 2G Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-anynet-2g-click-board-28852985462973.jpg?v=1685171993&width=1445)
Uses AWS Gateway
The AnyNet 2G Click Board™ is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing.
This Click Board™ provides an easy and secure connection with the AWS over the air (OTA), by utilising the equipped Quectel M95 module and Eseye ES4623 embedded SIM card, that can work with more than 235 cellular operators from all over the world. AnyNet 2G Click Board™ can be used as an AWS IoT button with almost no configuration.
The AnyNet 2G Click Board™ comes supplied with the start-up package - free activation through the AWS, unique ID number of the embedded SIM card and six-month cellular connectivity services of up to 5000 messages to the AWS cloud. With the AnyNet 2G Click Board™, users get the unique level of integration with the AWS IoT services.Note: Before the purchase of AnyNet 2G Click Board™, please contact Eseye and check for the coverage and support of embedded SIM cards from your local provider. Opening an AWS account and subscribing to Eseye marketplace is mandatory to work with this Click Board™.
How Does The AnyNet 2G Click Board™ Work?
The cellular connection is established through the Quectel M95 2G module (also found on the GSM2 Click Board™) and the embedded ES4623 SIM card by Eseye company, used to communicate with the AWS. The additional on-board Microchip MCU contains the firmware used to interface the GSM/GPRS module to UART, providing users with easy to use end-point AT commands. UART communication speed is set to 9600bps. To initiate the communication, several simple AT command strings should be transmitted to the UART pins of the Click Board™. All the information about how to use AT commands can be found in the AT commands reference.
AnyNet 2G Click Board™ requires both 3.3V and 5V power supply pins from the mikroBUS to operate. The 5V rail is used to power up the Quectel M95 module itself through the LVD regulator, while the 3.3V rail is used for powering up the rest of the circuitry.
There are four LEDs used to display the connection status. Before the connection and communication with the AWS are possible, the setup procedure must be followed. For detailed step by step information, refer to the AnyNet 2G Click Board™ user manual.
After the successful connection to the AWS and successful exchange of the certificates have been established, the serial interface can be used to publish messages on the AWS IoT service console. AWS also provides data analysis and processing, as well as cloud storage capabilities.
IoT Button
The AnyNet 2G Click Board™ has the IoT Button feature - a pin routed to the INT pin of the mikroBUS Setting this pin to a HIGH logic level is considered as IoT Button press. AWS IoT gateway recognizes three types of messages: short press, long press, and double-Click Board™.
The AWS IoT Button pin is based on the Amazon Dash Button hardware. The functionality of this pin is designed for developers to get started with AWS IoT, AWS Lambda, Amazon DynamoDB, Amazon SNS, and many other Amazon Web Services.
IoT Button pin can be coded in cloud service to perform various tasks, such as remote control for Netflix, a switch for Philips Hue light bulb, a check-in/check-out device for Airbnb guests and so on. It can also be integrated with the third-party APIs like Twitter, Facebook, Twilio, Slack or even custom applications.
Future firmware updates are provided by the Eseye company over the air. The updates may include additional functionality and improved stability. For any additional technical questions regarding the firmware on this module, contact Eseye technical support.
AnyNet 2G Click Board™ Features
- Connects development projects globally through 235+ cellular networks across 75+ countries and securely sends data to the AWS account.
- Supplied with a start-up package, including FREE Activation through AWS and a six-month cellular connectivity service of up to 5,000 messages onto the AWS Cloud.
- Provides security features for developers to remotely and securely activate, authenticate and certify the prototype device Over-the-Air directly from the AWS Cloud.
- Instantly meets Cloud security rules and gives immediate scalability as projects grow.
- Gives unique levels of integration with AWS IoT and reduces or removes ongoing developer and infrastructure costs with AWS resources e.g. AWS IoT Gateway and Cloud Storage and Analytics.
- Bills data sent from the device (Thing) to the AWS Cloud as messaging through AWS Marketplace.
Eseye Support
Use this link to find out how to sign up for the AnyNet Secure Cellular Connectivity through AWS Marketplace.To create an AWS account youll also need instructions.Use this pdf manual to learn how to create your AWS AnyNet Secure Connected Thing.
AnyNet 2G Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.