Mikroelektronika d.o.o.
MikroBUS Shuttle Bundle
MikroBUS Shuttle Bundle
Couldn't load pickup availability
Shuttle Click Board™ in combination with mikroBUS Shuttle provides an easy and elegant solution for stacking multiple Click Board™ boards™ on a single mikroBUS™.
Shuttle Click Board™ can be especially interesting for the IoT development systems that are equipped with a very small number of mikroBUS™ slots. Using Shuttle Click Board™ on such system will greatly improve its usability by adding more mikroBUS™ sockets, yet it will remain small, compact and manageable.
![Mikroelektronika d.o.o. MIKROE-3785 MikroBUS Shuttle Bundle - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-mikrobus-shuttle-bundle-23151559671997.jpg?v=1685138331&width=1445)
![Mikroelektronika d.o.o. MIKROE-3785 MikroBUS Shuttle Bundle - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-mikrobus-shuttle-bundle-30243513630909.jpg?v=1685195023&width=1445)
![Mikroelektronika d.o.o. MIKROE-3785 MikroBUS Shuttle Bundle - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-mikrobus-shuttle-bundle-30243468574909.jpg?v=1685019716&width=1445)
![Mikroelektronika d.o.o. MIKROE-3785 MikroBUS Shuttle Bundle - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-mikrobus-shuttle-bundle-23151559770301.jpg?v=1685138688&width=1445)
![Mikroelektronika d.o.o. MIKROE-3785 MikroBUS Shuttle Bundle - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-mikrobus-shuttle-bundle-23151559803069.jpg?v=1685095683&width=1445)
Why do you need Shuttle?
When there's a need to expand the development system with even more mikroBUS slots, one of the free mikroBUS shuttles can be populated with yet another Shuttle Click Board™, allowing even more connections. This makes the stacking capacity almost unlimited. However, attention should be paid not to make mikroBUS lines too long. In situations like this, the frequency of the communication might need to be stepped down a bit, in order to compensate for the longer mikroBUS signal lines.
How does The mikroBUS Shuttle work?
Lines of the mikroBUS to which Shuttle Click Board™ is attached, are shared through all four ICD BOX headers - each of the four ICD BOX 2x8 pin headers mirrors pins of the connected mikroBUS. Therefore, each mikroBUS Shuttle add-on board shares the same mikroBUS pins as the other mikroBUS Shuttles connected to the same Shuttle Click Board™. For this reason, an extra care should be taken when working with Click Board™s that share the same pins on the mikroBUS, either for the communication (SPI, UART, I2C) or for some other purpose (RST, INT, or other pins used as GPIO). For example, I2C and 1-Wire protocols are designed with stacking in mind, so the collision avoidance mechanisms are already in place for these protocols. It is enough to change the slave address of the Click Board™ and data collision won't be a problem anymore, even while sharing the same pins for the communication.
Also, since all the stacked Click Board™s share the same power rails, a care should be taken when combining Click Board™s with significant power consumption.
The Click Board™ product range
The union of Shuttle Click Board™, mikroBUS Shuttle and Click Board™s allows you to reach an unlimited number of possibilities when it comes to combining different functionalities. You just need to choose the ones you want from our ever-growing range: environmental sensors, LEDs, speech recognition, heart rate sensors, motor control, GSM, GPS, WiFi, analog to digital converters, movement sensors.
More than 850 Click Board™s that can be stacked and integrated in a simple and convenient way are at your disposal.
Turn your development system into a mikroBUS shuttle station!
MikroBUS Shuttle Bundle
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.