Lineeye Co Ltd
Lineeye LE-590TX Ethernet LAN Packet Tester
Lineeye LE-590TX Ethernet LAN Packet Tester
Couldn't load pickup availability
The Lineeye LE-590TX is a LAN analyzer that connects to a PC's USB2.0 port. In TAP mode, you can capture full-duplex data on 10/ 100Base-TX and transmit it to the PC at 480Mbps via the USB 2.0 interface. You can generate test packets at up to 100Mbps line rate in PG mode.
●Checking LAN protocols and data of the communication of target devices.
●Checking and analyzing traffic.
●Providing statistical information, such as error rate etc.
●Generate test packets for network tests.
●Measuring QoS, such as latency etc.
●Studying network communication protocols.
![Lineeye Co Ltd LE-590TX LE-590TX Ethernet LAN Packet Tester - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/lineeye-co-ltd-protocol-analyser-le-590tx-ethernet-lan-packet-tester-38119224017119.jpg?v=1684964279&width=1445)
Capture 10/100Mbps LAN Packets Via USB
TAP mode captures 10/100Mbps full-duplex data on PortA/ PortB, and transmits to PC via USB2.0 port. Captured data can be displayed on PC.
Filter To Capture The Specific Packets
LE-590TX is not only able to capture all frames but also filter the specific packets. Filtering conditions can be set by MAC/IP address, protocols (ARP/IP/ICMP/IGMP/TCP/UDP/use defined), and specifying IP address/port/packet size etc.
Visualize the amount of traffic
You can evaluate the amount of traffic visually by a line, pie, an bar graph.
Generate Packets Max. At 100Mbps Line Speed.
PG mode generates test packets at your specified transmitting speed. Tells you the processing ability of the network devices and how they work at the high traffic. Test packets are generated in the FPGA, so it will not be affected by the performance of PC.
User Defined Test Packets
The user can define 2-7 layer of data frames up to 64 for each of A and B port, and transmit them continuously or selected times. Add errors (CRC etc.) and VLAN tags. Captured packets can be used as transmitting packets.
RFC 2544 based Test Tool is attached
LINEEYE provide an Utility software "LE590-2544; which is basing on RFC 2544 (an technical standard of network interconnection).
- Throughput
- Latency
- Packet Loss
- Back to Back (Test of Buffer Capacity)
You can check those 4 tests by simple operation. The result can be output as a report.
Can be used as a NIC via USB
Using a LE590-NIC, the packet tester acts as a network interface via USB. LE590-NIC can also be used for firmware update too.
Lineeye LE-590TX Ethernet LAN Packet Tester
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
![banner Image](http://thedebugstore.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_medium.gif)