Dediprog Technology Co Ltd
Dediprog EM-SP-CB 10-Pin Split Cable with 2x10 Connector
Dediprog EM-SP-CB 10-Pin Split Cable with 2x10 Connector
Couldn't load pickup availability
The 10-Pin Split Cable has a 10-pin header that can be directly connected to the Serial Flash Emulator (EM100 or EM100Pro) and SF600 programmer. Each split cable has a different colour and is labelled with the pin name to make it easy to identify.
Each lead is terminated with a single-pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is only 12cm long to minimize signal degradation. The Grabber on the hold pin can grab the hold pin of the soldered serial flash on the target board if no hold pin is designed on the target board pin header.
![Dediprog EM-SP-CB Cable Schematic](https://cdn.shopify.com/s/files/1/0522/6931/8333/files/dediprog-em-sp-cb-cable-schematic.png?v=1686396423)
![Dediprog Technology Co Ltd EM-SP-CB Dediprog EM-SP-CB 10-Pin Split Cable with 2x10 Connector - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/dediprog-technology-co-ltd-cable-dediprog-em-sp-cb-10-pin-split-cable-with-2x10-connector-23150685454525.jpg?v=1685160108&width=1445)
Dediprog EM-SP-CB 10-Pin Split Cable with 2x10 Connector
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
![banner Image](http://thedebugstore.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_medium.gif)