Mikroelektronika d.o.o.
Carte Click LSM6DSL
Carte Click LSM6DSL
Impossible de charger la disponibilité du service de retrait
Le Click Board™ LSM6DSL mesure la vitesse linéaire et angulaire avec six degrés de liberté. Il est équipé de l'accéléromètre numérique 3 axes hautes performances LSM6DSL et du gyroscope numérique 3 axes. Le Click Board™ est conçu pour fonctionner sur une alimentation 3,3 V.
La carte Click Board™ LSM6DSL communique avec le microcontrôleur cible via l'interface SPI ou I2C, avec des fonctionnalités supplémentaires fournies par la broche INT sur la ligne MikroBUS.
The LSM6DSL Click Board™ measures linear and angular velocity with six degrees of freedom. It carries the LSM6DSL high-performance 3-axis digital accelerometer and 3-axis digital gyroscope. The click is designed to run on a 3.3V power supply. The LSM6DSL Click Board™ communicates with the target microcontroller over SPI or I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
Mode 1: I2C slave interface or SPI serial interface is available.
Mode 2: I2C slave interface, or SPI serial interface and I2C interface master for external sensor connections, are available.
LSM6DSL INERTIAL MODULE FEATURES
The LSM6DSL is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 0.65 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience.
The event-detection interrupts enable efficient and reliable motion tracking and contextual awareness, implementing hardware recognition of free-fall events, 6D orientation, click and double-click sensing, activity or inactivity, and wakeup events
The LSM6DSL has a full-scale acceleration range of ±2/±4/±8/±16 g and an angular rate range of ±125/±245/±500/±1000/±2000 dps (degrees per second).
SPECIFICATIONS
| Type | Acceleration,Gyroscope,Motion |
| Applications | Motion tracking and gesture detection, indoor navigation, vibration monitoring and compensation, etc. |
| On-board modules | LSM6DSL |
| Key Features | Power consumption: 0.4 mA in combo normal and 0.65 mA in combo high-performance mode; hard, soft ironing for external magnetic sensor corrections |
| Interface | I2C,SPI |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the LSM6DSL Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | INT | Programmable interrupt | |
| Chip select | CS | 3 | CS | TX | 14 | NC | |
| SPI clock | SCK | 4 | SCK | RX | 13 | NC | |
| Master input slave output | MISO | 5 | MISO | SCL | 12 | SCL | I2C clock |
| Master output slave input | MOSI | 6 | MOSI | SDA | 11 | SDA | I2C data |
| Power supply | +3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
JUMPERS AND SETTINGS
| Designator | Name | Default Position | Default Option | Description |
|---|---|---|---|---|
| JP1 | COMM SEL | Left | SPI | Communication Interface Selection SPI/I2C, left position SPI, right position I2C |
| JP2 | COMM SEL | Left | SPI | Communication Interface Selection SPI/I2C, left position SPI, right position I2C |
| JP3 | COMM SEL | Left | SPI | Communication Interface Selection SPI/I2C, left position SPI, right position I2C |
| JP4 | INT SEL | Left | INT1 | Interrupt selection INT1/INT2, left position INT1, right position INT2 |
| JP5 | COMM SEL | Left | SPI | Communication Interface Selection SPI/I2C, left position SPI, right position I2C |
| JP6 | MODE SEL | Left | 1 | Mode Selection 1/2, left position 1, right position 2 |
| JP7 | MODE SEL | Left | 1 | Mode Selection 1/2, left position 1, right position 2 |
| JP8 | ADD SEL | Left | 0 | I2C slave address selection 0/1, left position 0, right position 1 |
Software Support
Code examples for the LSM6DSL Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet initializes the module, the driver, and peripherals, and then outputs the measured data to UART every two seconds.
01 void main()
02 {
03 char txt [100];
04 float x,y,z;
05
06 systemInit();
07 LSM6DSL_initDriver(SPI3_Write, SPI3_Read);
08 UART1_Write_Text ("rnInitialized");
09
10 /*
11 * Starts measurements for acceleration and rotation at specified
12 * rate (104 HZ) and selected full-scale (+-2G, +-245DPS).
13 */
14 LSM6DSL_configureRead (CONFIG_ACCELERATION, ODR_104_HZ | FULLSCALE_A_2);
15 LSM6DSL_configureRead (CONFIG_ROTATION, ODR_104_HZ | FULLSCALE_R_245);
16 while( 1 )
17 {
18 UART1_Write_Text ("rnrnAcceleration values in mili-Gs:");
19 LSM6DSL_readAccelerationXYZ (&x, &y, &z, FULLSCALE_A_2);
20 sprintf (txt, "rnX: %.2f, t Y:%.2f, t Z: %.2f", x,y,z);
21 Uart1_Write_Text (txt);
22
23 UART1_Write_Text ("rnRotation values in degrees per second:");
24 LSM6DSL_readRotationXYZ (&x, &y, &z, FULLSCALE_R_245);
25 //Values are read in mili-degrees per second, so they need to be divided by 1000
26 sprintf (txt,
27 "rnPitch: %.2f, t Roll:%.2f, t Yaw: %.2f", x/1000,y/1000,z/1000);
28 Uart1_Write_Text (txt);
29
30 delay_ms (2000);
31 }
32 }
Carte Click LSM6DSL
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.