Skip to product information
1 of 2

SEGGER Microcontroller GmbH

SEGGER MIPI-60 Adapter (8.06.42)

SEGGER MIPI-60 Adapter (8.06.42)

Adapts J-Link/J-Trace/Flasher to TI Jacinto7 MIPI-60; 19-pin & 20-pin outputs with 4-bit trace.

SKU: 8.06.42

Regular price
€162,95 EUR exc tax
Regular price Sale price
€162,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Key Features

Dual Output Headers
TI Jacinto7 Focus
4-Bit TPIU Trace Support
JTAG & SWD on One Adapter
Passive, Standards-Aligned Mapping
Works Across SEGGER Families
Small, Bench-Friendly Form Factor

Overview

The SEGGER MIPI-60 Adapter (8.06.42) connects a J-Link, J-Trace or Flasher to Texas Instruments Jacinto 7 targets through the 60-pin MIPI debug connector. It has two probe-side connectors: a 19-pin JTAG/SWD and Trace connector for up to 4-bit TPIU trace with a J-Trace PRO, and an ARM standard 20-pin connector for JTAG debug.

Direct Jacinto7 Compatibility

Mates to TI’s 60-pin MIPI debug header, avoiding custom wiring and reducing bring-up risk on Jacinto-based designs.

Flexible Probe Connectivity

19-pin Cortex-M and 20-pin ARM headers cover JTAG/SWD and 4-bit trace in one board, simplifying lab setups.

Standards-Aligned, Passive Mapping

Uses standard ARM/MIPI debug connectors; schematic available for easy verification and documentation.

The SEGGER MIPI-60 Adapter (part number 8.06.42) connects a J-Link, J-Trace or Flasher to Texas Instruments Jacinto 7 target hardware through its 60-pin MIPI debug connector. The adapter provides two probe-side connectors: a 19-pin JTAG/SWD and Trace connector that supports TPIU trace with up to 4 data pins, and the ARM standard 20-pin connector. It suits board bring-up and software debug on Jacinto 7 hardware: JTAG debug with a J-Link, trace capture with a J-Trace PRO, and JTAG access for a Flasher.

19-Pin Trace and 20-Pin JTAG Outputs on One Board

For trace, the 19-pin 0.05" connector carries TRACECLK and TRACEDATA[0] to [3], and SEGGER makes it available on all J-Trace PRO models. For debug and programming only, the standard J-Link 20-pin 0.1" connector found on most J-Link models takes a J-Link or Flasher directly. Pin assignments for the 20-pin side are in our SEGGER J-Link 20-pin connector pinout guide.

MIPI-60 Signals Used by the Adapter

SEGGER's published pinout connects VTREF on pins 1 and 12, TMS, TCK, TDO, TDI, RESET, RTCK, TRST and TRST PD, the trace clock and control lines, four trace data lines and GND. The remaining MIPI-60 pins are not connected.

Compatible SEGGER Probes, Trace Probes and Programmers

SEGGER lists the adapter for J-Trace PRO, J-Trace PRO RISC-V, J-Trace PRO Cortex and J-Trace PRO Cortex-M; for J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact; and for Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS.

Specifications

Part number 8.06.42
Target side MIPI-60, 60-pin (TI Jacinto 7)
Probe side, trace 19-pin JTAG/SWD and Trace connector, 0.05" (1.27mm); TPIU trace up to 4 pins
Probe side, debug ARM standard 20-pin, 0.1" (2.54mm)
MIPI-60 pins used 1 and 12 VTREF; 2 TMS; 3 TCK; 4 TDO; 5 TDI; 6 RESET; 7 RTCK; 8 TRST PD; 9 TRST; 13 TRC CLK; 17 TRC CTL; 19, 21, 23, 25 TRC DAT0 to DAT3; 15, 16, 57, 58 GND
Compatible J-Trace models J-Trace PRO, PRO RISC-V, PRO Cortex, PRO Cortex-M
Compatible J-Link models J-Link PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact
Compatible Flasher models Flasher PRO, PRO XL, Compact, Portable PLUS

What's Included

One MIPI-60 Adapter (8.06.42). SEGGER lists no cable or other accessories with it.

Limitations

  • Trace is limited to 4 data pins, through the 19-pin connector that SEGGER makes available on J-Trace PRO. J-Link and Flasher connect through the 20-pin connector for debug and programming.
  • SEGGER's Knowledge Base says never to connect the 19-pin and 20-pin cables at the same time, because debug and trace connections can become unstable.
  • SEGGER lists no cable and publishes no dimensions for the adapter.
  • SEGGER describes the adapter for JTAG connections; it does not state SWD support on the MIPI-60 side.

MIPI-60 Adapter Compared with Related Adapters

Adapter Target connector Trace Price ex VAT
MIPI-60 Adapter (this product) MIPI-60 (TI Jacinto 7) Up to 4-bit TPIU, via 19-pin output €162,95
19-Pin Cortex-M Adapter ARM 19-pin, 0.05" SWO; JTAG and SWD €47,95
J-Link Mictor 38 Adapter 38-pin Mictor Not connected (GND and JTAG only) €231,95
TI-CTI-20 Adapter TI CTI-20 None listed €97,95

Order the MIPI-60 Adapter for €162,95 ex VAT. For trace capture, pair it with a J-Trace PRO Cortex, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Part number8.06.42
Probe side, debugARM standard 20-pin, 0.1" (2.54mm)
Host and Target Interface
Target sideMIPI-60, 60-pin (TI Jacinto 7)
MIPI-60 pins used1 and 12 VTREF; 2 TMS; 3 TCK; 4 TDO; 5 TDI; 6 RESET; 7 RTCK; 8 TRST PD; 9 TRST; 13 TRC CLK; 17 TRC CTL; 19, 21, 23, 25 TRC DAT0 to DAT3; 15, 16, 57, 58 GND
Performance
Probe side, trace19-pin JTAG/SWD and Trace connector, 0.05" (1.27mm); TPIU trace up to 4 pins
Compatible J-Trace modelsJ-Trace PRO, PRO RISC-V, PRO Cortex, PRO Cortex-M
Software and Compatibility
Compatible J-Link modelsJ-Link PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact
Compatible Flasher modelsFlasher PRO, PRO XL, Compact, Portable PLUS
Ordering information
Part number (SKU)8.06.42
ManufacturerSEGGER Microcontroller GmbH
EAN5055383692248
Warranty12 months
Shipping weight0.02 kg
  • 1 × SEGGER MIPI-60 Adapter (8.06.42)

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

10 questions
  • Do I Need a J-Trace to Use the MIPI-60 Adapter?

    Only for trace. JTAG debug and programming work through the 20-pin connector with a J-Link or Flasher; the 4-bit TPIU trace on the 19-pin connector needs a J-Trace PRO model.

    Answered by John LeggUpdated 16 Nov 2026
  • Which Target Boards Is It For?

    SEGGER designed it for Texas Instruments Jacinto 7 target hardware with a 60-pin MIPI debug connector. Check that your board's MIPI-60 pin use matches SEGGER's published pinout.

    Answered by John LeggUpdated 16 Nov 2026
  • Will It Power My Target?

    No. It routes debug/trace signals only; power your target separately according to the board’s design. (General SEGGER adapter behaviour; see schematic.)

    Answered by John LeggUpdated 12 Oct 2026
  • What’s the Difference Between the 19-Pin and 20-Pin Outputs?

    The 19-pin header is the 0.05″ Cortex-M debug/trace connector (supports 4-bit TPIU). The 20-pin header is the 0.1″ ARM JTAG/SWD connector without trace.

    Answered by John LeggUpdated 12 Oct 2026
  • Can I Use It with Non-Jacinto Boards?

    Only if the board has the 60-pin MIPI debug header, which many boards don't. For other connectors, see the 19-Pin Cortex-M Adapter or the J-Link Mictor-38 Adapter.

    Answered by John LeggUpdated 12 Oct 2026
  • What Is TPIU and When Would I Use It?

    TPIU (Trace Port Interface Unit) is the trace port on the target; this adapter routes up to 4 trace data pins to the 19-pin header. ETM/PTM instruction trace from the target is output through the TPIU trace port; a J-Trace PRO is needed to capture it.

    Answered by John LeggUpdated 12 Oct 2026
  • Where Can I Learn More About the MIPI-60 Debug Connector?

    SEGGER's MIPI-60 Adapter product page publishes the pinout table and the adapter schematic (MIPI-60_Adapter_Schematic.pdf).

    Answered by John LeggUpdated 12 Oct 2026
  • What Does the MIPI-60 Adapter Do?

    It bridges a TI Jacinto7 board’s 60-pin MIPI debug header to standard SEGGER probe connectors (19-pin Cortex-M with 4-bit trace, and 20-pin ARM JTAG/SWD).

    Answered by John LeggUpdated 12 Oct 2026
  • Does It Support ETM/PTM Instruction Trace?

    The adapter routes the 4-bit TPIU trace port to the 19-pin header and SEGGER lists J-Trace PRO as a suitable probe; check SEGGER's device support for Jacinto7 trace.

    Answered by John LeggUpdated 12 Oct 2026
  • Is the Mapping Published?

    Yes, SEGGER provides the adapter schematic so you can review and verify pin assignments.

    Answered by John LeggUpdated 12 Oct 2026

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.