
Overview
The TI-CTI-20 Adapter adapts the standard J-Link 20-pin 0.1" connector to the TI CTI-20 connector, so a J-Link or Flasher can connect to Texas Instruments evaluation boards with a CTI-20 header, such as the AM335x evaluation module. A key on pin 6 stops the adapter being fitted the wrong way round.
The SEGGER TI-CTI-20 Adapter (part number 8.06.06) adapts the standard J-Link 20-pin 0.1" connector to the TI CTI-20 connector, so a J-Link or Flasher can connect to Texas Instruments evaluation boards with a CTI-20 header, such as the AM335x evaluation module. A key on pin 6 stops the adapter being fitted the wrong way round. It suits JTAG debug and flash programming on TI evaluation hardware with a SEGGER probe already on the bench.
J-Link and Flasher Access to TI CTI-20 Headers
The probe side plugs into the standard J-Link 20-pin 0.1" connector found on most J-Link models, and into the same 20-pin connector on Flasher. The target side presents the TI CTI-20 connector. SEGGER's schematic carries VTREF, TRST, TDI, TMS, TCK, RTCK, TDO and nSRST to the target, with EMU0 and EMU1 tied to GND. Probe-side pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.
Listed for the TI AM335x Evaluation Module
SEGGER names the AM335x evaluation module as an example target. Its Knowledge Base page for the TI AM3359 states that the debug probe can be connected using the TI CTI-20 adapter, and lists the TMDXEVM3358 as tested hardware.
Compatible SEGGER Probes and Programmers
SEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.
Specifications
| Part number | 8.06.06 |
|---|---|
| Probe side | J-Link/Flasher 20-pin, 0.1" (2.54mm) |
| Target side | TI CTI-20 connector |
| Keying | Key on pin 6 |
| Target signals (SEGGER schematic) | VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, nSRST; EMU0 and EMU1 tied to GND |
| Example target | TI AM335x evaluation module (TMDXEVM3358 listed as tested) |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, ARM, Portable PLUS, Secure |
| Compatible J-Link models | J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
What's Included
SEGGER publishes no box contents list for this adapter, so we state only the TI-CTI-20 Adapter itself.
Limitations
- SEGGER's schematic shows the JTAG signal set only; SEGGER lists no SWD or trace connection for this adapter.
- SEGGER publishes no dimensions and lists no cable for it.
- For TI targets with a 14-pin 0.1" JTAG header, use the 14-Pin TI Adapter. For Jacinto 7 boards with a MIPI-60 header, use the MIPI-60 Adapter.
TI-CTI-20 Adapter Compared with Related Adapters
| Adapter | Target connector | Signals | Cable listed by SEGGER | Price ex VAT |
|---|---|---|---|---|
| TI-CTI-20 Adapter (this product) | TI CTI-20 | JTAG | None listed | €97,95 |
| 14-Pin TI Adapter | TI 14-pin, 0.1" | JTAG | 0.1" 14-pin ribbon cable (18cm) | €77,95 |
| MIPI-60 Adapter | MIPI-60 (TI Jacinto 7) | JTAG/SWD, up to 4-bit trace | None listed | €162,95 |
Order the TI-CTI-20 Adapter for €97,95 ex VAT. Check your board's CTI-20 header against SEGGER's schematic, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.06 |
| Probe side | J-Link/Flasher 20-pin, 0.1" (2.54mm) |
| Keying | Key on pin 6 |
| Host and Target Interface | |
| Target side | TI CTI-20 connector |
| Target signals (SEGGER schematic) | VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, nSRST; EMU0 and EMU1 tied to GND |
| Example target | TI AM335x evaluation module (TMDXEVM3358 listed as tested) |
| Software and Compatibility | |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, ARM, Portable PLUS, Secure |
| Compatible J-Link models | J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
| Ordering information | |
| Part number (SKU) | 8.06.06 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383615346 |
| Warranty | 12 months |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER TI-CTI-20 Adapter
Contact us to confirm the full contents of the box.
Questions and Answers
-
Does the TI-CTI-20 Adapter Work with Flasher as Well as J-Link?
Yes. SEGGER lists six Flasher models, from Flasher PRO to Flasher Secure, alongside the current J-Link PRO, ULTRA+, WiFi, PLUS and BASE models. All of them use the same 20-pin 0.1" connector on the probe side.
-
Can the Adapter Be Connected the Wrong Way Round?
No. SEGGER keys the adapter on pin 6, so it fits a CTI-20 header in one orientation only.
-
Which TI Boards Use the CTI-20 Connector?
SEGGER names the AM335x evaluation module, and its Knowledge Base lists the TMDXEVM3358 as tested hardware for the AM3359. For other boards, check the board documentation for a CTI-20 header.
No questions match your search.