Zu Produktinformationen springen
1 von 1

Total Phase, Inc

Total Phase PROMIRA I2C Analysis Application

Total Phase PROMIRA I2C Analysis Application

SKU: TP601110

Normaler Preis
£120.00 exc VAT
£144.00 inc VAT
Normaler Preis Verkaufspreis
£120.00 exc VAT
£144.00 inc VAT
Sale Ausverkauft
Versand wird beim Checkout berechnet

Information We Need for Your Order

We will send you the licence for this serial number.

Zahlungsmethoden

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Banküberweisung
Vollständige Details anzeigen

Overview

THIS PRODUCT IS NOT AVAILABLE FOR DELIVERY TO THE USA

The Promira I2C Analysis Application (TP601110) turns a Total Phase Promira Serial Platform into a non-intrusive I2C protocol analyser that monitors live traffic at up to 5 MHz at 3.3 V. Captured data streams directly to the PC, so capture length is set by disk space rather than an on-board buffer, and Data Center decodes it in real time with error reporting and bit-level timing. It is the tool for debugging what two real I2C devices actually say to each other.

Non-Intrusive I2C Capture to 5 MHz

The analyser listens to SDA and SCL without driving them, so the bus behaves exactly as it does without the tool attached. Total Phase rates capture at up to 5 MHz at 3.3 V, above the 4 MHz limit of the Beagle I2C/SPI. What you capture is what the shipping product does, including the NAK, the clock stretch or the stuck bus that only happens with the real parts.

Real-Time Decode With Error Codes and Bit-Level Timing

Data Center shows addresses, data, ACK and NAK as they occur, with error codes on malformed transactions. Bit-level timing shows when each edge occurred, so clock stretching and timing faults can be compared with the device datasheet instead of guessed at.

Nearly Limitless Streamed Capture

Because data is streamed straight to the PC, a capture can run for hours to catch a fault that appears once a day. Over Gigabit Ethernet the Promira can sit next to a unit in an environmental chamber or a soak-test rack while you watch from your desk.

Software

Captures are viewed in Total Phase Data Center, which decodes the bus in real time and saves sessions for later review. The analysis applications need Promira firmware v2.00 or later, which is installed through the Promira admin interface.

Specifications

Function I2C bus monitor (Analysis), non-intrusive
Maximum capture rate 5 MHz at 3.3 V
Capture Streamed directly to the PC
Decode Real time, with error codes and bit-level timing
Software Data Center
Firmware Promira firmware v2.00 or later
Host platform Promira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet
Manufacturer part number TP601110

Limitations

  • This is a software licence only. It runs on the Promira Serial Platform (£1,040 ex VAT), which is sold separately and must be in place before the licence can be installed.
  • Monitor only. It does not act as master or slave; for that add I2C Active Level 1.
  • Total Phase rates the 5 MHz figure at 3.3 V. If your bus runs at 1.8 V or lower, contact us before ordering.
  • We ask for your Promira serial number at checkout, as printed on the label of the unit, because we need it to process the licence.

Which I2C and SPI Analyser Should You Choose?

Beagle I2C/SPI Analyser Promira I2C Analysis Promira SPI Analysis Level 1 Promira SPI Analysis Level 2
I2C capture To 4 MHz To 5 MHz at 3.3 V No No
SPI capture To 24 MHz No To 24 MHz at 3.3 V, 1 chip select To 40 MHz, 1 chip select
Host connection USB 2.0 USB 2.0 or Gigabit Ethernet USB 2.0 or Gigabit Ethernet USB 2.0 or Gigabit Ethernet
Price ex VAT £400 £120 plus platform £120 plus platform £245 plus platform

If you need to watch I2C and SPI from one low-cost box at USB speeds, the Beagle I2C/SPI does both. If you already own a Promira, or need an I2C protocol analyser that captures above 4 MHz or works over Ethernet, add I2C Analysis for £120 ex VAT.

Typical Applications

Finding why a PMBus regulator occasionally NAKs its host during power-up. Measuring clock stretching on a slow EEPROM against the master's timeout. Logging a sensor bus overnight in a thermal chamber to catch a temperature-dependent fault.

I2C Analysis suits firmware and hardware engineers debugging I2C integration and test engineers chasing intermittent field failures.

Order the Promira I2C Analysis Application from £120 ex VAT. For a formal quotation, request a quote from our team.

Last reviewed 5 October 2026.

Sources (4 Total Phase pages)
Ordering information
Part number (SKU)TP601110
ManufacturerTotal Phase, Inc
EAN5055383619856
Warranty12 months
  • 1 × Total Phase PROMIRA I2C Analysis Application

Contact us to confirm the full contents of the box.

Total Phase PROMIRA I2C Analysis Application compared with Total Phase Beagle I2C / SPI Analysator and Total Phase PROMIRA SPI Analysis - Level 1 Application on 7 specifications.

Specifications of Total Phase PROMIRA I2C Analysis Application compared with Total Phase Beagle I2C / SPI Analysator and Total Phase PROMIRA SPI Analysis - Level 1 Application
SpecificationThis product Total Phase PROMIRA I2C Analysis ApplicationTP601110Available to order Total Phase Beagle I2C / SPI AnalysatorTP320121In stock Total Phase PROMIRA SPI Analysis - Level 1 ApplicationTP601510Available to order
I2C capture Up to 5 MHzUp to 4 MHzNot supported
SPI capture Not supportedUp to 24 MHzUp to 24 MHz
SPI capture I/O width Not supportedNot listedSingle I/O
MDIO capture Not listedUp to 2.5 MHz (Clause 22 and 45)Not listed
Voltage level shifting Built-inAccessory boardBuilt-in
Hardware needed Licence for Promira Serial Platform (TP500110)Standalone analyserLicence for Promira Serial Platform (TP500110)
PC interface High-Speed USBHigh-Speed USBHigh-Speed USB
Price£120 £400 £120

Windows

  • Total Phase Promira Software API for WindowsTotal Phase Promira Software API v1.60 for Windows, as published by Total Phase. ZIP404 KB · v1.60 · Nov 2026 · Windows
    Details

macOS

  • Total Phase Promira Software API for macOSTotal Phase Promira Software API v1.60 for macOS, as published by Total Phase. ZIP197 KB · v1.60 · Nov 2026 · macOS
    Details

Linux

  • Total Phase Promira Software API for LinuxTotal Phase Promira Software API v1.60 for Linux, as published by Total Phase. ZIP221 KB · v1.60 · Nov 2026 · Linux
    Details
Engineer Q&A

Questions and Answers

4 questions

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.