Dediprog Technology Co Ltd
Dediprog ISP-600-CB1-G SF600 ISP-Kabel
Dediprog ISP-600-CB1-G SF600 ISP-Kabel
SKU: ISP-600-CB1-G
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
Overview
The ISP-600-CB1-G is a purpose-built interface cable that bridges Dediprog's SF600 series programmers to target boards with 2×6 2.54mm ISP headers. This flat ribbon cable maintains signal integrity during SPI flash programming operations, supporting both single and dual chip select configurations for versatile board designs.
The cable features robust construction with clearly marked pin 1 orientation via red stripe coding, ensuring correct connection every time. Its compact 2×6 connector format matches the industry-standard ISP header found on most development and production boards, making it an indispensable accessory for engineers working with SF600 programmers.
Regular replacement of this cable is recommended in high-frequency production environments to maintain optimal signal contact and programming reliability. The cable supports all standard SPI modes and voltage levels from 1.8V to 5V, accommodating the full range of modern SPI flash devices.
Why Engineers Choose The Dediprog ISP-600-CB1-G SF600 ISP-Kabel
Essential Accessory
Production Ready
Future Proof Design
Das SF600 ISP-Kabel wird verwendet, um den ISP SF600-Programmierer mit dem 2X6 2,54 mm ISP-Pin-Header an Bord zu verbinden und bietet die Möglichkeit, den SPI-Flash-Inhalt direkt zu aktualisieren. Bei häufigen Verbindungen muss das ISP-Kabel von Zeit zu Zeit gewechselt werden, um einen guten Kontakt mit den Signalen der Anwendungsplatine (Produktions- oder Reparaturkanal) sicherzustellen. Die ISP-Aktualisierungsmethode darf nur verwendet werden, wenn sie von Ihrer Anwendung oder Ihrem Controller unterstützt wird.
Tabelle 1: Pinbelegung des ISP-Kabelanschlusses (2x6)
| 1 | Vpp | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Halten/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | Masse | MOSI/DQ0 | 10 |
| 11 | NC | Zurücksetzen | 12 |
| General Information | |
|---|---|
Part Number (SKU) |
ISP-600-CB1-G
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.05 kg
|
| Other | |
Warranty |
|
HS Code Customs Tariff code
|
|
EAN |
5055383621897
|
Frequently Asked Questions
Have a Question?
-
Can I extend this cable for hard-to-reach connectors?
Cable extension is not recommended as it may compromise signal integrity. Consider using Dediprog's split cable alternatives for custom routing requirements.
-
Is the cable suitable for quad SPI mode programming?
Yes, the cable supports all SPI modes including single, dual, and quad I/O operations through the DQ0-DQ3 signal lines.
-
How often should I replace the cable in production use?
Replace the cable when connection reliability decreases or after extensive use in production environments to maintain optimal programming performance.
-
What voltage levels does the cable support?
The cable supports all standard SPI voltage levels from 1.8V to 5V, automatically adapting to the target board's requirements.
-
Can I program multiple SPI devices with this single cable?
Yes, the cable supports dual chip select lines (CS1 and CS2), allowing software-controlled selection between two SPI devices on the target board.
-
Does the cable supply power to the target board?
The cable can supply target voltage via the Vcc pin, but many applications require the target board to be powered independently for proper operation.
-
How do I identify pin 1 orientation?
The cable features a red stripe along one edge indicating pin 1. Align this with the pin 1 markers on both the programmer and target board connectors.
-
What is the maximum cable length for reliable operation?
The cable should be kept as short as possible, ideally under 20cm, to maintain signal integrity. Longer cables may cause communication failures.
-
Can I use this cable with other Dediprog programmers?
No, this cable is specifically designed for SF600 series programmers. SF100 programmers require the ISP1-CB cable, and other models have their own dedicated cables.
-
What SF600 programmers is this cable compatible with?
The ISP-600-CB1-G cable is compatible with all SF600 series programmers including SF600, SF600Plus, and SF600Plus-G2 models.