
Overview
The NAND Flash Evaluator is an evaluation board for SEGGER's emFile NAND driver, built around an ST STM32H743 ARM Cortex-M7 microcontroller running at up to 400 MHz. A TSOP48 socket lets you test parallel NAND flash without soldering, in TSOP48 or VFBGA63 packages with an 8-bit or 16-bit data bus. The MCU and NAND device run at 3.3V or 1.8V, set by jumper.
The SEGGER NAND Flash Evaluator (part number 6.20.12) is an evaluation board for SEGGER's emFile NAND driver, built around an ST STM32H743 ARM Cortex-M7 microcontroller running at up to 400 MHz, with a TSOP48 socket so parallel NAND flash can be tested without soldering. It works with virtually any parallel NAND flash in TSOP48 or VFBGA63 packages with an 8-bit or 16-bit data bus, and runs the MCU and NAND device at 3.3V or 1.8V by jumper. Use it to compare candidate NAND parts and check emFile behaviour on real flash before committing a device to your own design.
Swap NAND Flash Devices in the TSOP48 Socket
Most evaluation boards have the flash soldered down, which ties the evaluation to one part. Here the NAND device sits in a TSOP48 socket on an adapter board that plugs into the baseboard through three 8-pin headers, so you can test one candidate, remove it and fit the next. For VFBGA63 parts, SEGGER offers a VFBGA63 flash adapter as an add-on module and publishes its schematic. A jumper selects 3.3V or 1.8V for both the MCU and the NAND device, covering low-voltage parts as well as 3.3V flash.
emFile NAND Driver and Evaluation Software
The evaluation software for SEGGER Embedded Studio exercises the emFile components SEGGER lists for this board: BASE, Encryption, FAT, FAT LFN, Journaling, Storage Layer, RAMDisk and the NAND device driver. emFile is supplied as object code with a start project. The same evaluation package also covers embOS (Core and Profiling), emUSB-Device, emNet, emSSL, emSSH, emSecure, emCrypt, emCompress, emModbus, emWeb and the IoT Toolkit, so one board can also be used to try the rest of the emPower OS stack. SEGGER's application note AN00020 covers getting started with its evaluation software, and SEGGER states that the board is recognised by all current operating systems out of the box.
Board Interfaces, Power and Debug Access
The baseboard has a micro-USB connector for power and data, high-speed USB and a 19-pin debug header. It is powered from micro-USB or through the debug connector pins, a green LED shows that power is present, and a bi-colour green and red status LED sits on a GPIO port. The baseboard has 2 MB of ROM and 383 KB of RAM. Programming and debugging the evaluator need a JTAG debug probe such as J-Link.
Specifications
| Part number | 6.20.12 |
|---|---|
| Microcontroller | ST STM32H743, ARM Cortex-M7, up to 400 MHz |
| On-board memory | 2 MB ROM, 383 KB RAM |
| Flash socket | TSOP48, on plug-in adapter board |
| Supported NAND | Parallel NAND flash in TSOP48 or VFBGA63 packages, 8-bit or 16-bit data bus |
| Flash adapter connection | Three 8-pin headers |
| MCU and NAND voltage | 3.3V or 1.8V, jumper selectable |
| Host interface | Micro-USB (power and data), high-speed USB |
| Debug connector | 19-pin debug header |
| Power | Micro-USB or debug connector pins |
| LEDs | Green power LED; bi-colour green/red status LED on a GPIO port |
| emFile components | BASE, Encryption, FAT, FAT LFN, Journaling, Storage Layer, RAMDisk, NAND device driver |
| Evaluation software | Project for SEGGER Embedded Studio; emFile as object code with start project |
What's Included
- NAND Flash Evaluator carrier board
- NAND Flash Adapter TSOP-48
Limitations
- No debug probe is included. Programming and debugging need a JTAG debug probe such as J-Link.
- SEGGER's package list names no USB cable; supply your own micro-USB cable.
- The VFBGA63 flash adapter is an add-on module from SEGGER, not part of the package.
- The board evaluates parallel NAND. For SPI and QSPI NOR or NAND flash, use the (Q)SPI Flash Evaluator.
- SEGGER publishes no dimensions or weight for the board.
SEGGER Flash Evaluators Compared
| Model | Flash type | Device mounting | Programming and debug | Price ex VAT |
|---|---|---|---|---|
| NAND Flash Evaluator (this product) | Parallel NAND, 8-bit or 16-bit bus | TSOP48 socket; VFBGA63 adapter as add-on | J-Link, 19-pin debug header | £270 |
| (Q)SPI Flash Evaluator | SPI and QSPI NOR and NAND | Devices soldered to SO, BGA or SON/DFN adapter boards | J-Link or Flasher, direct or indirect programming | £248 |
| J-Link BASE Compact | JTAG/SWD debug probe for programming and debugging the evaluator | £470 | ||
Typical Applications
Shortlisting TSOP48 NAND parts from several vendors for a data logger, by running the emFile NAND driver on each one in turn. Checking that a 1.8V NAND device works with emFile before the board design fixes the flash supply rail. Trying emFile journaling and encryption on real NAND before licensing the file system.
The board suits firmware engineers choosing a NAND device and teams evaluating emFile for a product.
Order the NAND Flash Evaluator for £270 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
Sources (3 manufacturer pages)
| General | |
|---|---|
| Part number | 6.20.12 |
| Microcontroller | ST STM32H743, ARM Cortex-M7, up to 400 MHz |
| On-board memory | 2 MB ROM, 383 KB RAM |
| Flash adapter connection | Three 8-pin headers |
| MCU and NAND voltage | 3.3V or 1.8V, jumper selectable |
| LEDs | Green power LED; bi-colour green/red status LED on a GPIO port |
| emFile components | BASE, Encryption, FAT, FAT LFN, Journaling, Storage Layer, RAMDisk, NAND device driver |
| Host and Target Interface | |
| Flash socket | TSOP48, on plug-in adapter board |
| Host interface | Micro-USB (power and data), high-speed USB |
| Debug connector | 19-pin debug header |
| Power | |
| Power | Micro-USB or debug connector pins |
| Software and Compatibility | |
| Supported NAND | Parallel NAND flash in TSOP48 or VFBGA63 packages, 8-bit or 16-bit data bus |
| Evaluation software | Project for SEGGER Embedded Studio; emFile as object code with start project |
| Ordering information | |
| Part number (SKU) | 6.20.12 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383699179 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
- 1 ×NAND Flash Evaluator carrier board
- 1 ×NAND Flash Adapter TSOP-48
Questions and Answers
-
Which NAND Flash Devices Can I Test?
SEGGER says virtually any parallel NAND flash in a TSOP48 or VFBGA63 package with an 8-bit or 16-bit data bus. TSOP48 parts fit the supplied socket adapter; VFBGA63 parts need SEGGER's add-on adapter.
-
Do I Need a Debug Probe to Use the NAND Flash Evaluator?
Yes, for programming and debugging the board. SEGGER asks for a JTAG debug probe such as J-Link, and none is included in the package.
-
Does It Support 1.8V NAND Flash?
Yes. A jumper sets the MCU and the NAND device to 3.3V or 1.8V.
No questions match your search.