Aardvark I2C/SPI Host Adapter Unboxing and Quick Start
Video notes

The Total Phase Aardvark I2C/SPI Host Adapter is a USB-powered tool for talking directly to I2C and SPI devices from a Windows, Linux or macOS computer. It runs I2C as a master from 1 kHz to 800 kHz or as a slave, and SPI as a master up to 8 MHz or a slave up to 4 MHz. That covers sensor evaluation, EEPROM and Flash programming, and automated test. The 2×5 IDC target connector carries I2C, SPI and up to six GPIO lines, with +5 V target power (25 mA max) for low-current devices.
Control Center Serial handles configuration and message transactions, with XML batch scripts for automation. Flash Center programs I2C and SPI memories from an extensible parts library. The Aardvark API (C, C++, C#, Python, .NET, VB.NET, VB6) and a LabVIEW driver let you build it into your own tools. All the software is a free download.
For higher speeds and built-in level shifting, step up to the Promira Serial Platform. To see what is happening on the bus without driving it, pair the Aardvark with the Beagle I2C/SPI Analyser.
Video notes
Videos are hosted on YouTube and load only when you press play.
The Total Phase Aardvark I2C/SPI Host Adapter (TP240141) connects a Windows, Linux or macOS PC to the I2C and SPI buses on your board over USB. It works as a master or a slave on either bus, so you can drive a sensor or memory from a script, or stand in for a peripheral while you test a host driver. It is Total Phase's most popular product and is used for I2C and SPI bring-up, EEPROM and Flash programming, and scripted production test.
| I2C | Master 1 kHz to 800 kHz; slave mode; multi-master, clock stretching, repeated start and 10-bit addressing |
|---|---|
| SPI | Master 125 kHz to 8 MHz; slave 0.1 MHz to 4 MHz; full duplex; SS polarity set in software (master) |
| GPIO | Up to 6, shared with the I2C and SPI pins |
| Compatible buses | SMBus, PMBus, DDC, SBBus, IPMI, TWI |
| Signal levels | 3.3 V, 10 mA |
| Target power | +5 V, 25 mA max on pins 4 and 6, switched in software |
| Target connector | 2×5 IDC female, 2.54 mm pitch, on a 10-way ribbon cable (1.27 mm pitch, 130 mm long) |
| Host interface | USB 1.1 full speed, USB-B receptacle, bus-powered |
| Software | Control Center Serial, Flash Center, Aardvark API (C, C++, C#, Python, .NET, VB.NET, VB6), LabVIEW driver |
| Operating systems | Windows 7, 10 and 11; Linux (Red Hat, SuSE, Ubuntu, Fedora); macOS 13 and later |
| Size and weight | 55.6 × 22.2 × 89 mm, 64 g |
| Operating temperature | 10 to 35 °C |
Actual I2C bus speed varies with bus capacitance.
Control Center Serial, Flash Center, the Aardvark API and the LabVIEW driver are free downloads from Total Phase.
As an I2C or SPI master, the Aardvark takes the place of the microcontroller. Read a sensor's ID register, write a PMIC's configuration or poll an ADC from Control Center Serial without writing code. Once a sequence works, save it as an XML batch script and run it again on every board spin.
Flash Center programs and reads I2C and SPI EEPROMs and Flash memory from an XML parts library that you can extend. The Aardvark programs parts in-system on the target board or stand-alone.
In slave mode the Aardvark answers as an I2C or SPI peripheral, so you can test a host driver before the real part arrives, with responses you control. Pins not used by the active bus can be switched to GPIO to drive resets and enables or watch status lines alongside the bus traffic.
The Aardvark API gives C, C++, C#, Python, .NET, VB.NET and VB6 access on Windows, Linux and macOS, and the LabVIEW driver suits NI-based test rigs. Several Aardvarks can run from one PC, each opened by its own port number.
| Tool | Role | I2C | SPI | Choose It When |
|---|---|---|---|---|
| Aardvark I2C/SPI (TP240141) | Host adapter, master or slave | Master to 800 kHz | Master to 8 MHz, slave to 4 MHz | Everyday 3.3 V bring-up, programming and test |
| Beagle I2C/SPI (TP320121) | Passive protocol analyser | Monitors to 4 MHz | Monitors to 24 MHz | You need to record bus traffic without driving it |
| Cheetah SPI (TP280121) | High-speed SPI host adapter | Not supported | Master to 40+ MHz | Fast SPI Flash programming |
| Promira Serial Platform (TP500110) | Host adapter and analyser | Master and slave to 3.4 MHz | Master to 80 MHz, slave to 20 MHz | Higher speeds, or 0.9 V to 3.3 V signalling without a level shifter |
Promira speeds depend on the application level licensed. Many engineers pair the Aardvark with a Beagle: one generates traffic, the other records it. For targets below 3.3 V, add the Total Phase Level Shifter Board (TP240610), which shifts to standard logic levels from 1.2 V to 3.3 V.
3.3 V signalling only (use the Level Shifter Board below 3.3 V); SPI slave mode tops out at 4 MHz; USB 1.1 full speed; no eSPI (see Promira).
Last reviewed 24 October 2026.
| General | |
|---|---|
| Host interface | USB 2.0 Full Speed (12 Mbps) |
| Power source | USB bus-poweredNo external supply required. Typical 25 mA draw. |
| Target power out | +5 V (low-current devices only)Via pin 4 of 2×5 IDC connector |
| Connector (target) | 2×5 IDC (10-pin, 2.54 mm pitch) |
| Connector (host) | USB Type-A |
| Logic levels | 3.3 V I/O |
| Firmware storage | Internal flash, field upgradeable |
| GPIO | |
| GPIO pins | Up to 6 (shared with I²C/SPI) |
| Direction | Each pin independently input or output |
| Logic level | 3.3 V |
| Max drive current | 10 mA per pin |
| I²C-only mode GPIOs | GPIO 02 to 05 (SPI pins repurposed) |
| SPI-only mode GPIOs | GPIO 00 and 01 (I²C pins repurposed) |
| I²C interface | |
| Modes | Master and Slave |
| Standard mode | 100 kHz |
| Fast mode | 400 kHz |
| Fast-plus mode | 800 kHz |
| Pull-ups | 2.2 kΩ software-selectableEnable/disable via API, no external resistors needed for most targets |
| Clock stretching | Supported (master & slave) |
| 10-bit addressing | Supported |
| Multi-master | Supported (bus arbitration) |
| SMBus | Supported |
| PMBus | Supported |
| DDC / DDC-CI | Supported |
| IPMI | Supported |
| SPI interface | |
| Modes | Master and Slave |
| Max speed (master) | 8 MHz |
| Max speed (slave) | 4 MHz |
| SPI modes | 0, 1, 2, 3 (CPOL/CPHA all combinations) |
| Bit order | MSB first or LSB first |
| SS polarity | Active-low (default) or active-high |
| Word size | 8-bit |
| Full duplex | Supported |
| Ordering information | |
| Part number (SKU) | TP240141 |
| Manufacturer | Total Phase, Inc |
| EAN | 5055383601769 |
| Warranty | 2 years |
| Shipping weight | 1.0 kg |
Contact us to confirm the full contents of the box.
Total Phase Aardvark I2C/SPI Host Adapter compared with Total Phase Cheetah SPI Host Adapter and Total Phase PROMIRA Platform on 8 specifications.
| Specification | This product
Total Phase Aardvark I2C/SPI Host AdapterTP240141In stock |
Total Phase Cheetah SPI Host AdapterTP280121In stock |
Total Phase PROMIRA PlatformTP500110Available to order |
|---|---|---|---|
| I2C master | Up to 800 kHz | Not supported | Up to 3.4 MHz (I2C Active Level 2) |
| I2C slave | Up to 800 kHz | Not supported | Up to 3.4 MHz (I2C Active Level 2) |
| SPI master | Up to 8 MHz | Up to 40 MHz | Up to 80 MHz (SPI Active Level 3) |
| SPI slave | Up to 4 MHz | Not supported | Up to 20 MHz (SPI Active Level 2 or 3) |
| SPI I/O width | Single | Single | Single/Dual/Quad (SPI Active Level 3) |
| PC interface | Full-Speed USB | High-Speed USB | High-Speed USB and Gigabit Ethernet |
| GPIO | Up to 6 | Not listed | Up to 16 (SPI Active Level 3) |
| Voltage level shifting | Accessory board | Accessory board | Built-in (0.9 V to 3.45 V) |
| Price | €420,95 | €596,95 | €1.306,95 |
2 years from Debug Store. Total Phase's standard hardware warranty is 12 months; Debug Store covers the second year itself, at no extra cost.
Yes. The Aardvark's internal firmware can be upgraded over USB with Total Phase's aaflash utility when Total Phase releases new firmware.
The Aardvark is powered from the host computer over USB and draws less than 100 mA, so no external power supply is needed. It can also supply +5 V to a target on pins 4 and 6 of the 10-pin connector, up to 25 mA per pin (hardware v2.00 and later), which suits small low-current target boards.
Yes, the Aardvark supports clock stretching as a Master or a Slave.
Only the slave device can initiate clock stretching, to extend an I2C bus cycle. Not all I2C master or slave devices support it, so check this if you rely on clock stretching.
Yes and no. The Aardvark can only act as one I2C address node at a time, but you can change the slave address as required using the Aardvark API software.
Yes. The Aardvark host adapters also support:
It connects a computer to I2C and SPI devices so you can debug, test and program them. This saves development time.
The Aardvark is a simple shape that is easy to measure for placing in your equipment: it measures 55.6 x 22.2 x 89 mm and weighs 64 g. If you need a CAD file, please ask Total Phase.
The Aardvark provides up to 6 GPIO pins.
Each pin can be set as input or output, with internal pull-up resistors available on inputs. The aa_gpio_change function detects pin state changes within a set timeout, giving interrupt-like operation. All GPIO pins use 3.3V logic with a maximum drive current of 10 mA per pin.
Yes. The Aardvark can program I2C and SPI EEPROMs and Flash memory.
The included Flash Centre Software has a built-in library of popular memory devices from manufacturers including Atmel, Microchip, Intel, STMicroelectronics and Cypress. Its XML-based device library can be extended for custom memory devices.
It can read, write, erase and verify memory with built-in error checking. For production, you can use several Aardvark adapters at once for parallel programming.
The Aardvark API supports C, C#, Python 2 and 3, .NET, VB.NET and VB6. A LabVIEW driver is available as a separate download from Total Phase.
Total Phase currently lists support for Windows 7, 10 and 11, Linux (Red Hat, SuSE, Ubuntu, Fedora) and macOS 13 or later, on Intel and Apple Silicon. Control Center Serial, Flash Center and the API are free to download from Total Phase.
Yes. The Aardvark supports programming a wide range of EEPROM and Flash memory devices with Flash Center™ software, for embedded development and production programming.
Total Phase lists applications for the Aardvark including memory programming, sensors, industrial and home automation and audio processing, wherever reliable I2C and SPI communication is required.
Yes. It can be used in automated production test systems to program firmware and run automated tests on I2C and SPI devices during manufacturing workflows.
The Aardvark is a professional tool for engineers, but the free Control Center software gives a graphical interface for configuration and control, and the free API is there when you want to script tests.
Yes. As well as I2C and SPI, the Total Phase Aardvark supports these related protocols:
Because it supports both I2C and SPI protocols, includes professional APIs for automation, and allows both master and slave operation for full protocol testing and debugging in development and production environments.
Yes.
Its programmable interface and scripting support let you build automated test sequences, which speeds up quality control. Because it handles both I2C and SPI, it can test a range of components on a production line, from sensors to memory chips.
The Aardvark comes with Total Phase's Control Center software.
It gives a graphical interface for configuration and control, plus a transaction log of the messages it sends and receives, which can be exported to CSV. It also supports scripting for automated testing.
Yes. Through its API status codes the Aardvark reports I2C errors such as missing ACKs on the transactions it takes part in, and the Control Center transaction log records every transaction it sends or receives. For passive bus monitoring use the Beagle I2C/SPI analyser.
You can also emulate I2C devices to isolate faults.
Yes. The Aardvark supports I2C multi-master configurations, where several master devices share the same I2C bus. This is useful when multiple controllers need to start communication independently, for example in distributed control systems or IoT applications.
The Total Phase Aardvark I2C/SPI Host Adapter is a USB-to-I2C/SPI interface for electronic design engineers.
It connects your computer (Windows, Linux or macOS) to embedded systems so you can communicate with I2C and SPI devices for prototyping, debugging and programming. It works as master or slave, with I2C up to 800 kHz and SPI up to 8 MHz (master) or 4 MHz (slave). It also provides up to 6 GPIO pins.
Yes. You can connect and run several Aardvark adapters at once on one host computer.
Each one gets a unique port number, which you can find with the aadetect utility or the aa_find_devices API function. Software can open handles to several adapters and control each one independently through separate API calls. Each device draws less than 100 mA.
Typical uses:
Control Centre Software can manage multiple connected Aardvark adapters through its device selection interface.
As well as standard I2C and SPI, the Aardvark supports several related standards and variants.
I2C-based standards:
It also handles repeated start conditions, 10-bit addressing, combined format transactions, clock stretching and multi-master configurations.
For SPI, you can set clock polarity and phase, slave select polarity, and MSB-first or LSB-first bit order. Some other SPI variants and custom protocols can be handled through the GPIO at low speeds.
You can add further protocols, including proprietary ones, by writing your own software with the API. The GPIO can also be used for bit-banged protocols or custom signalling, but it is driven by host API calls over USB, so this suits slow signals only.
The standard Aardvark ribbon cable is 130.175 mm (5.125 inches) long with a 1.27 mm (0.050 inch) pitch.
Longer cables reduce signal integrity, especially for SPI at up to 8 MHz. Lower-speed I2C at 100 to 400 kHz tolerates longer runs better than fast SPI. If you need a longer connection, keep it as short as the fixture allows and check the signals with an oscilloscope.
Several Aardvarks can run from one host PC, each appearing as its own port, which is the usual way to cover several targets.
Yes. It can act as master or slave on the I2C bus, so you can simulate a microcontroller talking to a sensor, verify sensor outputs, test different I2C speeds and stress-test sensors under various conditions.
Control Center's transaction log can be exported to CSV for analysis.
Yes. Total Phase provides a Python API for configuring the Aardvark, sending and receiving data, and analysing communication. Use it for custom test scripts, automated data collection, or integrating the Aardvark into larger software systems.
Yes. The Aardvark has GPIO (General Purpose Input/Output) pins. The GPIO lines are the I2C or SPI pins repurposed, so you can use them when one of the buses is not in use. Use them for custom signalling, triggering external events, controlling extra hardware, extra chip select lines for SPI devices (switched by host API calls, not by the SPI engine), or synchronising with other test equipment.
Yes. The Aardvark has fixed 2.2 kΩ pull-up resistors on SCL and SDA, which can be switched on or off in software (hardware v2.00 and later). The value is not adjustable. If your bus needs a different pull-up value, switch the Aardvark pull-ups off and fit the resistors on the target.
The Aardvark provides I2C up to 800 kHz and SPI up to 8 MHz as master (4 MHz as slave), in master and slave modes, with a free API and a free LabVIEW driver. For a comparison with the NI-845x adapters, check National Instruments' specifications against your own requirements.
Yes. The Control Center software supplied with the Aardvark supports XML scripting for automated test and control sequences.
You can define device configuration and data transmission in XML. This is useful for repeatable test procedures, automating firmware updates, or integrating the Aardvark into larger automated test frameworks.
Both are Total Phase products, but they do different jobs.
The Aardvark is for interfacing and basic analysis. It takes an active part in I2C and SPI communications, which suits interactive debugging and development.
The Beagle is a protocol analyser for passive monitoring and in-depth analysis. It offers higher capture speeds, more detailed timing analysis, and handles more complex protocol scenarios.
Many developers use the Aardvark day to day and the Beagle for specialised debugging and performance optimisation.
The Aardvark covers I2C to 800 kHz and SPI to 8 MHz (master). The Promira Serial Platform is the step up: I2C to 3.4 MHz, SPI master up to 12.5, 40 or 80 MHz depending on the licence level, SPI slave up to 20 MHz, eSPI support, and built-in level shifting from 0.9 to 3.3 V.
Promira supports I2C, SPI and eSPI. For CAN, see the Total Phase Komodo CAN interfaces.
As well as I2C and SPI, the Aardvark supports related serial interfaces: DDC, SMBus, PMBus, SBBus, IPMI and TWI.
No questions match your search.