Tag-Connect, LLC
Tag-Connect TC2030-FTDI-C232HD-DTR USB to TC2030 Serial Cable (DTR on Pin 2)
Tag-Connect TC2030-FTDI-C232HD-DTR USB to TC2030 Serial Cable (DTR on Pin 2)
SKU: TC2030-FTDI-C232HD-DDHSP-0-DTR
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
Overview
This is FTDI's C232HD Hi-Speed USB-to-serial converter cable fitted with a 6-pin TC2030 Tag-Connector. On these DTR versions, pin 2 of the TC2030 carries DTR (grey wire) instead of CTS (brown wire), which is useful where a serial bootloader is controlled with DTR.
The cable plugs straight onto the TC2030 footprint on your board, so no mating connector is fitted to the PCB, saving cost and space. The C232HD is based on the FT232H and runs at 12 Mbps on the UART with 3.3 V signal levels. The cable is nominally 1.8 m (5.9 ft) long.
Choose the C232HD-DDHSP-0 for a 3.3 V VCC supply (250 mA) or the C232HD-EDHSP-0 for 5 V VCC (450 mA), in legged or no-legs form. For CTS on pin 2, see the TC2030-FTDI-C232HD-DDHSP-0 and EDHSP-0 cables.
Downloads
Why Engineers Choose the Tag-Connect TC2030-FTDI-C232HD-DTR USB to TC2030 Serial Cable (DTR on Pin 2)
Bootloader Ready
Hi-Speed FTDI
Zero-Cost Footprint
Specifications
| Parameter | C232HD-DDHSP-0 versions | C232HD-EDHSP-0 versions |
|---|---|---|
| VCC | 3.3 V | 5 V |
| VCC maximum current | 250 mA | 450 mA |
| UART signal levels | 3.3 V | 3.3 V |
| Data rate | 12 Mbps | 12 Mbps |
| Converter | FTDI FT232H, Hi-Speed USB 480 Mbps | |
| Pin 2 | DTR (grey) instead of CTS (brown) | |
| Cable length | Nominally 1.8 m (5.9 ft) | |
Versions
| Part number | Legs | VCC |
|---|---|---|
| TC2030-FTDI-C232HD-DDHSP-0-DTR | Legged | 3.3 V |
| TC2030-FTDI-C232HD-EDHSP-0-DTR | Legged | 5 V |
| TC2030-NL-FTDI-C232HD-DDHSP-0-DTR | No legs | 3.3 V |
| TC2030-NL-FTDI-C232HD-EDHSP-0-DTR | No legs | 5 V |
Which TC2030 FTDI Cable?
| Cable | Converter and lead | Data rate | Pin 2 | VCC to target |
|---|---|---|---|---|
| TC2030-FTDI-C232HD-DTR (this cable) | FT232H in a 1.8 m FTDI C232HD cable | 12 Mbps | DTR | 3.3 V at 250 mA or 5 V at 450 mA |
| TC2030-FTDI-C232HD-DDHSP-0 and EDHSP-0 | FT232H in a 1.8 m FTDI C232HD cable | 12 Mbps | CTS | 3.3 V at 250 mA or 5 V at 450 mA |
| TC2030-CIC-FT232H | FT232H inside the connector head; USB-C cable supplied | UART up to 12 Mbaud; SPI, I²C and JTAG up to 30 Mbps on CTS versions | CTS or DTR, by version | 3.3 V or 5 V; 250 mA continuous |
| TC2030-FTDI-TTL-232RG | 1.8 m FTDI TTL-232RG cable | 3 Mbps | CTS | 1.8 V, 3.3 V or 5 V, by version |
Pin Connections
| TC2030 pin | FTDI signal (wire colour) | Direction |
|---|---|---|
| 1 | VCC (red) | Power output |
| 2 | DTR (grey) | Output |
| 3 | RXD / TDI (yellow) | Input |
| 4 | TXD / TCLK (orange) | Output |
| 5 | GND (black) | Ground |
| 6 | RTS / TDO (green) | Output |
Which cable fits your debugger? See our Tag-Connect cable guide.
| General Information | |
|---|---|
Part Number (SKU) |
TC2030-FTDI-C232HD-DDHSP-0-DTR
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
91 g
|
Questions and Answers
-
What Is Different From the Standard C232HD Cable?
Pin 2 of the TC2030 is connected to DTR (grey wire) instead of CTS (brown wire). All other connections are the same.
-
Which Version Do I Need?
DDHSP-0 versions supply 3.3 V VCC at up to 250 mA; EDHSP-0 versions supply 5 V VCC at up to 450 mA. UART signals are 3.3 V on both.
-
How Long Is the Cable?
Nominally 1.8 m (5.9 ft).
-
What Footprint Does My Board Need?
The standard TC2030 footprint for the legged version or the smaller TC2030-NL footprint for the no-legs version. Footprint details are in the TC2030-IDC (legged) and TC2030-IDC-NL (no-legs) datasheets in the Downloads section.
No questions match your search.