Zu Produktinformationen springen
1 von 2

SEGGER Microcontroller GmbH

SEGGER J-Trace Isolator-Adapter

SEGGER J-Trace Isolator-Adapter

Standardmäßiger 0,05-Zoll-19-poliger Cortex-M-Anschluss zur elektrischen Isolierung.

SKU: 8.07.10

Normaler Preis
£320.00 exc VAT
£384.00 inc VAT
Normaler Preis Verkaufspreis
£320.00 exc VAT
£384.00 inc VAT
Sale Ausverkauft
Versand wird beim Checkout berechnet
If no stock is shown above, order now and we'll dispatch within 5 working days.

Zahlungsmethoden

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Banküberweisung
Vollständige Details anzeigen

Key Features

1 kV DC-Isolierung
1,2 V - 5 V Zielbetrieb wird unterstützt
Stromversorgung über den Emulator, nur wenige Mikroampere (< 25 µA) werden vom Zielgerät bezogen
19-poliger JTAG-Standardanschluss mit Unterstützung für TDI-, TMS-, TCK-, TDO-, RESET- und SWD/SWO-Signale
SWD-Frequenz: Bis zu 4 MHz; JTAG-Frequenz: Bis zu 50 MHz

Overview

The J-Trace Isolator provides 1 kV DC basic electrical isolation between a J-Trace PRO and a target with the standard 0.05" 19-pin Cortex-M connector, while passing JTAG, SWD and ETM trace. It works with 1.2V to 5V targets, at JTAG and SWD speeds up to 4 MHz and trace clocks up to 75 MHz. It is designed for J-Trace V2 or later.

The SEGGER J-Trace Isolator (part number 8.07.10) provides 1 kV DC basic electrical isolation between a J-Trace PRO and a target with the standard 0.05" 19-pin Cortex-M connector, while passing JTAG, SWD and ETM trace. It works with 1.2V to 5V targets, at JTAG and SWD speeds up to 4 MHz and trace clocks up to 75 MHz. It is for trace and debug work where the probe and the target must be kept electrically separate.

Isolated ETM Trace on the 19-Pin Cortex-M Connector

Both sides of the isolator use a 0.05" 19-pin Cortex-M male connector: EMULATOR connects to the J-Trace cable and TARGET to the target cable. ETM trace pins are fully supported, with TRACECLK and TRACEDATA0 to TRACEDATA3 carried through high-speed digital isolators. SEGGER rates the trace clock at up to 75 MHz, the limit of the isolator IC, and reports up to 120 MHz in one example setup at room temperature with adjusted sampling delays in the J-Trace PRO.

Powered from the J-Trace PRO

The probe powers the isolator logic through pins 11 and 13, so the J-Trace PRO must supply 5V there; SEGGER notes that you may need to run "power on perm" once in J-Link Commander. The target side draws only a few microamps (under 25 µA). Three LEDs show emulator power, target power and target RESET.

What's Included

  • J-Trace Isolator
  • 20-pin target ribbon cable

Specifications

Isolation 1 kV DC, basic isolation
Connectors EMULATOR and TARGET, each 0.05" 19-pin Cortex-M male
Target voltage 1.2V to 5V
JTAG frequency Up to 4 MHz
SWD frequency Up to 4 MHz
Trace clock Up to 75 MHz
Trace signals TRACECLK, TRACEDATA0 to TRACEDATA3
Power From the probe, 5V on pins 11 and 13; under 25 µA from target
Indicators Emulator power (green), target power (green), target RESET (red)
Designed for J-Trace V2 or later

Limitations

  • Basic isolation only. SEGGER requires double or reinforced isolation to protect people from hazardous voltages, so do not rely on the isolator alone in that case.
  • JTAG and SWD are limited to 4 MHz, and trace clocks above 75 MHz are beyond the isolator IC's specification.
  • VTref (pin 1) must have no series resistor, and pin 9 should be left open on the target.
  • Other ARM emulators with the same pinout need 5V on pin 19 of the emulator connector; SEGGER states this is at your own risk.

J-Trace Isolator Compared with the J-Link Isolators

Isolator Connectors Interfaces Trace Price ex VAT
J-Trace Isolator (this product) 0.05" 19-pin Cortex-M JTAG, SWD, up to 4 MHz ETM, up to 75 MHz trace clock £320
J-Link JTAG Isolator 20-pin 0.1" JTAG JTAG, up to 4 MHz No £226
SWD Isolator 20-pin 0.1" SWD SWD and SWO, up to 4 MHz No £240

Order the J-Trace Isolator for £320 ex VAT, or ask us for a formal quotation. SEGGER lists it as suitable for the J-Trace PRO, J-Trace PRO Cortex-A/R/M, J-Trace PRO Cortex-M and J-Trace PRO RISC-V. See the full SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Isolation1 kV DC, basic isolation
IndicatorsEmulator power (green), target power (green), target RESET (red)
Designed forJ-Trace V2 or later
Host and Target Interface
ConnectorsEMULATOR and TARGET, each 0.05" 19-pin Cortex-M male
Target voltage1.2V to 5V
Performance
JTAG frequencyUp to 4 MHz
SWD frequencyUp to 4 MHz
Trace clockUp to 75 MHz
Trace signalsTRACECLK, TRACEDATA0 to TRACEDATA3
Power
PowerFrom the probe, 5V on pins 11 and 13; under 25 µA from target
Ordering information
Part number (SKU)8.07.10
ManufacturerSEGGER Microcontroller GmbH
EAN5055383619962
Warranty12 Monate
Shipping weight0.05 kg
  • 1 ×J-Trace Isolator
  • 1 ×20-pin 0.05" target ribbon cable
Engineer Q&A

Questions and Answers

2 questions
  • Does the Target Need to Power the J-Trace Isolator?

    No. The J-Trace PRO powers the isolator logic with 5V on pins 11 and 13. Only a few microamps, under 25 µA, are drawn from the target.

    Answered by John LeggUpdated 16 Nov 2026
  • How Fast Can Trace Run Through the Isolator?

    SEGGER specifies a trace clock up to 75 MHz, set by the digital isolator IC. It reports up to 120 MHz in one tested setup at room temperature with adjusted J-Trace PRO sampling delays, but that is outside the specification.

    Answered by John LeggUpdated 16 Nov 2026

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.