
Key Features
Overview
The SEGGER MIPI-60 Adapter (8.06.42) connects a J-Link, J-Trace or Flasher to Texas Instruments Jacinto 7 targets through the 60-pin MIPI debug connector. It has two probe-side connectors: a 19-pin JTAG/SWD and Trace connector for up to 4-bit TPIU trace with a J-Trace PRO, and an ARM standard 20-pin connector for JTAG debug.
Why Engineers Choose the SEGGER MIPI-60 Adapter (8.06.42)
Direct Jacinto7 Compatibility
Flexible Probe Connectivity
Standards-Aligned, Passive Mapping
The SEGGER MIPI-60 Adapter (part number 8.06.42) connects a J-Link, J-Trace or Flasher to Texas Instruments Jacinto 7 target hardware through its 60-pin MIPI debug connector. The adapter provides two probe-side connectors: a 19-pin JTAG/SWD and Trace connector that supports TPIU trace with up to 4 data pins, and the ARM standard 20-pin connector. It suits board bring-up and software debug on Jacinto 7 hardware: JTAG debug with a J-Link, trace capture with a J-Trace PRO, and JTAG access for a Flasher.
19-Pin Trace and 20-Pin JTAG Outputs on One Board
For trace, the 19-pin 0.05" connector carries TRACECLK and TRACEDATA[0] to [3], and SEGGER makes it available on all J-Trace PRO models. For debug and programming only, the standard J-Link 20-pin 0.1" connector found on most J-Link models takes a J-Link or Flasher directly. Pin assignments for the 20-pin side are in our SEGGER J-Link 20-pin connector pinout guide.
MIPI-60 Signals Used by the Adapter
SEGGER's published pinout connects VTREF on pins 1 and 12, TMS, TCK, TDO, TDI, RESET, RTCK, TRST and TRST PD, the trace clock and control lines, four trace data lines and GND. The remaining MIPI-60 pins are not connected.
Compatible SEGGER Probes, Trace Probes and Programmers
SEGGER lists the adapter for J-Trace PRO, J-Trace PRO RISC-V, J-Trace PRO Cortex and J-Trace PRO Cortex-M; for J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact; and for Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS.
Specifications
| Part number | 8.06.42 |
|---|---|
| Target side | MIPI-60, 60-pin (TI Jacinto 7) |
| Probe side, trace | 19-pin JTAG/SWD and Trace connector, 0.05" (1.27mm); TPIU trace up to 4 pins |
| Probe side, debug | ARM standard 20-pin, 0.1" (2.54mm) |
| MIPI-60 pins used | 1 and 12 VTREF; 2 TMS; 3 TCK; 4 TDO; 5 TDI; 6 RESET; 7 RTCK; 8 TRST PD; 9 TRST; 13 TRC CLK; 17 TRC CTL; 19, 21, 23, 25 TRC DAT0 to DAT3; 15, 16, 57, 58 GND |
| Compatible J-Trace models | J-Trace PRO, PRO RISC-V, PRO Cortex, PRO Cortex-M |
| Compatible J-Link models | J-Link PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, Portable PLUS |
What's Included
One MIPI-60 Adapter (8.06.42). SEGGER lists no cable or other accessories with it.
Limitations
- Trace is limited to 4 data pins, through the 19-pin connector that SEGGER makes available on J-Trace PRO. J-Link and Flasher connect through the 20-pin connector for debug and programming.
- SEGGER's Knowledge Base says never to connect the 19-pin and 20-pin cables at the same time, because debug and trace connections can become unstable.
- SEGGER lists no cable and publishes no dimensions for the adapter.
- SEGGER describes the adapter for JTAG connections; it does not state SWD support on the MIPI-60 side.
MIPI-60 Adapter Compared with Related Adapters
| Adapter | Target connector | Trace | Price ex VAT |
|---|---|---|---|
| MIPI-60 Adapter (this product) | MIPI-60 (TI Jacinto 7) | Up to 4-bit TPIU, via 19-pin output | €162,95 |
| 19-Pin Cortex-M Adapter | ARM 19-pin, 0.05" | SWO; JTAG and SWD | €47,95 |
| J-Link Mictor 38 Adapter | 38-pin Mictor | Not connected (GND and JTAG only) | €231,95 |
| TI-CTI-20 Adapter | TI CTI-20 | None listed | €97,95 |
Order the MIPI-60 Adapter for €162,95 ex VAT. For trace capture, pair it with a J-Trace PRO Cortex, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.42 |
| Probe side, debug | ARM standard 20-pin, 0.1" (2.54mm) |
| Host and Target Interface | |
| Target side | MIPI-60, 60-pin (TI Jacinto 7) |
| MIPI-60 pins used | 1 and 12 VTREF; 2 TMS; 3 TCK; 4 TDO; 5 TDI; 6 RESET; 7 RTCK; 8 TRST PD; 9 TRST; 13 TRC CLK; 17 TRC CTL; 19, 21, 23, 25 TRC DAT0 to DAT3; 15, 16, 57, 58 GND |
| Performance | |
| Probe side, trace | 19-pin JTAG/SWD and Trace connector, 0.05" (1.27mm); TPIU trace up to 4 pins |
| Compatible J-Trace models | J-Trace PRO, PRO RISC-V, PRO Cortex, PRO Cortex-M |
| Software and Compatibility | |
| Compatible J-Link models | J-Link PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, Portable PLUS |
| Ordering information | |
| Part number (SKU) | 8.06.42 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383692248 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER MIPI-60 Adapter (8.06.42)
Contact us to confirm the full contents of the box.
Questions and Answers
-
Do I Need a J-Trace to Use the MIPI-60 Adapter?
Only for trace. JTAG debug and programming work through the 20-pin connector with a J-Link or Flasher; the 4-bit TPIU trace on the 19-pin connector needs a J-Trace PRO model.
-
Which Target Boards Is It For?
SEGGER designed it for Texas Instruments Jacinto 7 target hardware with a 60-pin MIPI debug connector. Check that your board's MIPI-60 pin use matches SEGGER's published pinout.
-
Will It Power My Target?
No. It routes debug/trace signals only; power your target separately according to the board’s design. (General SEGGER adapter behaviour; see schematic.)
-
What’s the Difference Between the 19-Pin and 20-Pin Outputs?
The 19-pin header is the 0.05″ Cortex-M debug/trace connector (supports 4-bit TPIU). The 20-pin header is the 0.1″ ARM JTAG/SWD connector without trace.
-
Can I Use It with Non-Jacinto Boards?
Only if the board has the 60-pin MIPI debug header, which many boards don't. For other connectors, see the 19-Pin Cortex-M Adapter or the J-Link Mictor-38 Adapter.
-
What Is TPIU and When Would I Use It?
TPIU (Trace Port Interface Unit) is the trace port on the target; this adapter routes up to 4 trace data pins to the 19-pin header. ETM/PTM instruction trace from the target is output through the TPIU trace port; a J-Trace PRO is needed to capture it.
-
Where Can I Learn More About the MIPI-60 Debug Connector?
SEGGER's MIPI-60 Adapter product page publishes the pinout table and the adapter schematic (MIPI-60_Adapter_Schematic.pdf).
-
What Does the MIPI-60 Adapter Do?
It bridges a TI Jacinto7 board’s 60-pin MIPI debug header to standard SEGGER probe connectors (19-pin Cortex-M with 4-bit trace, and 20-pin ARM JTAG/SWD).
-
Does It Support ETM/PTM Instruction Trace?
The adapter routes the 4-bit TPIU trace port to the 19-pin header and SEGGER lists J-Trace PRO as a suitable probe; check SEGGER's device support for Jacinto7 trace.
-
Is the Mapping Published?
Yes, SEGGER provides the adapter schematic so you can review and verify pin assignments.
No questions match your search.