
Overview
The J-Link Mictor 38 Adapter adapts the standard J-Link 20-pin 0.1" target connector to the 38-pin Mictor connector, following the single target connector pinout defined in the ARM ETM Architecture Specification. It links the GND and JTAG pins to their counterparts on the 20-pin J-Link, and the trace pins on the Mictor connector are not connected. It is for JTAG debug of targets that expose only a Mictor 38 header.
The SEGGER J-Link Mictor 38 Adapter (part number 8.06.08) adapts the standard J-Link 20-pin 0.1" target connector to the 38-pin Mictor connector, following the single target connector pinout defined in the ARM "ETM Architecture Specification". It links the GND and JTAG pins to their counterparts on the 20-pin J-Link; the trace pins on the Mictor connector are not connected. It is for JTAG debug of targets that expose only a Mictor 38 header, using a J-Link rather than a trace probe.
JTAG Debug Through a Mictor 38 Header
The Mictor side plugs into the target directly or through a trace cable, and the J-Link side connects through a 20-pin flat cable to the standard J-Link 20-pin 0.1" connector found on most J-Link models. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.
Mictor 38 Pins Used by the Adapter
| Mictor pin | Signal |
|---|---|
| 5 | GND |
| 9 | nRES |
| 11 | TDO |
| 12, 14 | VTref |
| 13 | RTCK |
| 15 | TCK |
| 17 | TMS |
| 19 | TDI |
| 21 | TRST |
SEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.
Specifications
| Probe side | J-Link 20-pin, 0.1", via 20-pin flat cable |
|---|---|
| Target side | 38-pin Mictor, direct or via trace cable |
| Pinout standard | Single target connector, ARM "ETM Architecture Specification" |
| Signals connected | GND and JTAG (TDI, TMS, TCK, RTCK, TDO, TRST, nRES, VTref) |
| Trace pins | Not connected |
| Part number | 8.06.08 |
What's Included
SEGGER publishes no box list for this adapter; the order is for the J-Link Mictor 38 Adapter itself.
Limitations
- No trace. The 20-pin J-Link connector has no trace pins, so the Mictor trace pins are left unconnected; SEGGER points to J-Trace for trace.
- For J-Trace, SEGGER makes a separate J-Trace Mictor 38 Adapter that carries trace signals.
- SEGGER publishes no electrical or mechanical specification for the adapter.
J-Link Mictor 38 Adapter Compared with Related Adapters
| Adapter | Target connector | Probe and trace | Price ex VAT |
|---|---|---|---|
| J-Link Mictor 38 Adapter (this product) | 38-pin Mictor | J-Link or Flasher; JTAG only, no trace | €231,95 |
| J-Trace Mictor 38 Adapter | 38-pin Mictor | J-Trace PRO; four trace data pins plus trace clock | €231,95 |
| MIPI-60 Adapter | MIPI-60, Jacinto7 TI targets | J-Link, J-Trace or Flasher; TPIU trace up to 4 pins | €162,95 |
| 19-Pin Cortex-M Adapter | 19-pin, 0.05" Samtec FTSH | J-Link or Flasher; JTAG, SWD, SWO | €47,95 |
Order the J-Link Mictor 38 Adapter for €231,95 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Probe side | J-Link 20-pin, 0.1", via 20-pin flat cable |
| Part number | 8.06.08 |
| Host and Target Interface | |
| Target side | 38-pin Mictor, direct or via trace cable |
| Pinout standard | Single target connector, ARM "ETM Architecture Specification" |
| Signals connected | GND and JTAG (TDI, TMS, TCK, RTCK, TDO, TRST, nRES, VTref) |
| Performance | |
| Trace pins | Not connected |
| Ordering information | |
| Part number (SKU) | 8.06.08 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614646 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER J-Link Mictor 38 Adapter
Contact us to confirm the full contents of the box.
Questions and Answers
-
Can I Capture ETM Trace with This Adapter?
No. The trace pins on the Mictor connector are not connected, because the 20-pin J-Link connector has none. For trace, use a J-Trace with the J-Trace Mictor 38 Adapter.
-
Can It Plug Straight Into the Target?
Yes. The Mictor side connects to the target directly or through a trace cable; the J-Link side uses a 20-pin flat cable.
No questions match your search.