
Caratteristiche principali
Overview
Overview
The J-Link PRO PoE is SEGGER's J-Link PRO class probe with IEEE 802.3af Power over Ethernet, built for test farms and CI rigs where each probe sits on the LAN rather than beside a PC. It connects by 100 Mbit/s Ethernet or USB 2.0 Hi-Speed, runs at up to 50 MHz target interface speed with download speeds up to 4 MB/s, supplies the target with 5.25V at up to 1000mA when PoE powered, and includes J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences. For Ethernet without PoE see the J-Link PRO.
How It Connects
This J-Link uses SEGGER's standard 20-pin 0.1" (2.54 mm) JTAG/SWD connector, used on every J-Link except the J-Link EDU mini. For SWD you need VTref (pin 1), SWDIO (pin 7), SWCLK (pin 9), nRESET (pin 15) and GND (pin 4), plus SWO (pin 13) if you want trace output. Full JTAG, SWD, cJTAG and SPI pin tables, and the adapters for 10-pin 0.05" Cortex Debug headers: SEGGER J-Link 20-pin connector pinout.
Download
User Manuals
- Details
SEGGER J-Link and J-Trace
Perché gli ingegneri scelgono SEGGER J-Link Pro PoE Debug Probe
Scale Test Farms Reliably
Accelerate Debug Cycles
Reduce Lab Complexity
The SEGGER J-Link PRO PoE (part number 8.12.28) is an Ethernet and USB JTAG/SWD debug probe powered over the network cable by IEEE 802.3af PoE (type 1, class 3), with up to 50 MHz target interface speed and download speeds up to 4 MB/s. When PoE powered it can supply the target with 5.25V at up to 1000mA, and it includes licences for J-Flash, Unlimited Flash Breakpoints, Ozone and RDI. SEGGER built it for test farms: automated, regression and continuous integration testing where each probe sits on the LAN rather than beside a PC.
Power over Ethernet for Test Farm Nodes
One Ethernet cable carries data and power, so each node in a rack needs no USB power supply. SEGGER's Test Farm reference design gives every node a J-Link PRO PoE, connected to the LAN through its Ethernet interface and can be powered from PoE switches where the LAN provides PoE. The device under test is connected to the probe by a USB cable so its power supply can be controlled, alongside a target adapter chosen to match its debug connector. On the probe itself, the USB-A port is listed as power only.
Ethernet and USB Host Interfaces
The probe connects by 100 Mbit/s Ethernet or USB 2.0 Hi-Speed. In delivery condition it is configured for DHCP, and a static address can be set with J-Link Configurator. A built-in web server on TCP port 80 gives configuration access from a browser. The Ethernet data lines are isolated to IEEE 802.3 at a 1500 Vrms test voltage for one minute.
50 MHz JTAG/SWD, Power Measurement and Licences
SEGGER lists the same speed and feature figures for the PRO PoE as for the J-Link PRO: up to 50 MHz target interface speed, SWO sampling up to 100 MHz, 1.2V to 5V target interface voltage and analogue power measurement at 200 kHz with 50µA resolution. The target uses the standard J-Link 20-pin 0.1" connector; see our SEGGER J-Link 20-pin connector pinout guide. The J-Link PRO feature list covers JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2, with cores from ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, RISC-V (SiFive, Andes, Codasip, Nuclei), Renesas RX, Microchip PIC32 and Silicon Labs EFM8. J-Flash is preinstalled, and RTT and VCOM are supported.
What Is in the Box
J-Link PRO PoE probe, 20-pin 0.1" ribbon cable and a USB cable. Mounting brackets are sold separately.
Specifications
| Host interfaces | 100 Mbit/s Ethernet; USB 2.0 Hi-Speed |
|---|---|
| Power over Ethernet | IEEE 802.3af PoE type 1, class 3 |
| Target connector | JTAG/SWD 20-pin, 0.1" (2.54mm); USB-A (power only) |
| Supported debug interfaces | JTAG, cJTAG, SWD, SWO, Microchip ICSP, Renesas FINE |
| Target interface voltage (VIF) | 1.2V to 5V |
| Current drawn from VTref | Less than 25µA |
| Target supply, PoE powered | 5.25V, max. 1000mA |
| Target supply, USB powered | 5V, max. 400mA |
| Target interface speed | Max. 50 MHz |
| SWO sampling frequency | Max. 100 MHz |
| Download speed | Up to 4 MB/s |
| Power measurement | 200 kHz sampling frequency, 50µA resolution |
| Ethernet isolation | Data lines to IEEE 802.3, 1500 Vrms for one minute |
| Included licences | J-Flash (preinstalled), Unlimited Flash Breakpoints, Ozone, RDI |
| Dimensions (without cables) | 123mm x 68mm x 30mm |
| Weight (without cables) | 125g |
| Operating temperature | +5°C to +60°C |
| Storage temperature | -20°C to +65°C |
| Relative humidity | Max. 90% rH, non-condensing |
| EMC | EN 55032, EN 55035 |
| Host OS | Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon) |
Limitations
- PoE operation needs an IEEE 802.3af power source on the network side, such as a PoE switch; without one, power the probe from USB.
- The 1000mA target supply applies only when PoE powered; from USB the limit is 400mA.
- The Ethernet shield is not isolated; SEGGER specifies an unshielded twisted pair cable for effective isolation.
- No ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.
J-Link PRO PoE Compared with PLUS, ULTRA+ and PRO
| Model | Host interface | Download speed | Target interface speed | Ethernet | Power over Ethernet | Supported cores | Price ex VAT |
|---|---|---|---|---|---|---|---|
| J-Link PLUS Classic | USB 2.0 Hi-Speed | Up to 1 MB/s | Up to 15 MHz | No | No | ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 | £660 |
| J-Link ULTRA+ (J-Link Ultra) | USB 2.0 Hi-Speed | Up to 4 MB/s | Up to 50 MHz | No | No | ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 | £870 |
| J-Link PRO | USB 2.0 Hi-Speed and 100 Mbit/s Ethernet | Up to 4 MB/s | Up to 50 MHz | Yes | No | ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 | £1,100 |
| J-Link PRO PoE (this product) | USB 2.0 Hi-Speed and 100 Mbit/s Ethernet | Up to 4 MB/s | Up to 50 MHz | Yes | Yes, IEEE 802.3af | ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 | £1,320 |
Typical Applications
A rack of PRO PoE probes on a PoE switch, each flashing and testing one STM32 or nRF board per CI build, with the device under test power-cycled between runs. Regression testing of Cortex-M33 firmware on a remote bench reached over the LAN. Overnight soak tests where the probe reports RTT logs from a target that nobody is sitting next to.
For a single desk with USB, the ULTRA+ gives the same 50 MHz and 4 MB/s figures; the J-Link PRO adds Ethernet without PoE.
Order the J-Link PRO PoE for £1,320 ex VAT. Ask us for a formal quotation for a test farm quantity, or check your part number against SEGGER's supported devices list. See the full range in our SEGGER debug probes collection.
Last reviewed: 30 October 2026
| Host and Target Interface | |
|---|---|
| Host interfaces | 100 Mbit/s Ethernet; USB 2.0 Hi-Speed |
| Target connector | JTAG/SWD 20-pin, 0.1" (2.54mm); USB-A (power only) |
| Target interface voltage (VIF) | 1.2V to 5V |
| Ethernet isolation | Data lines to IEEE 802.3, 1500 Vrms for one minute |
| Performance | |
| Target interface speed | Max. 50 MHz |
| SWO sampling frequency | Max. 100 MHz |
| Download speed | Up to 4 MB/s |
| Power | |
| Power over Ethernet | IEEE 802.3af PoE type 1, class 3 |
| Current drawn from VTref | Less than 25µA |
| Target supply, PoE powered | 5.25V, max. 1000mA |
| Target supply, USB powered | 5V, max. 400mA |
| Power measurement | 200 kHz sampling frequency, 50µA resolution |
| Software and Compatibility | |
| Supported debug interfaces | JTAG, cJTAG, SWD, SWO, Microchip ICSP, Renesas FINE |
| Included licences | J-Flash (preinstalled), Unlimited Flash Breakpoints, Ozone, RDI |
| Host OS | Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon) |
| Physical | |
| Dimensions (without cables) | 123mm x 68mm x 30mm |
| Weight (without cables) | 125g |
| Environmental | |
| Operating temperature | +5°C to +60°C |
| Storage temperature | -20°C to +65°C |
| Relative humidity | Max. 90% rH, non-condensing |
| EMC | EN 55032, EN 55035 |
| Ordering information | |
| Part number (SKU) | 8.12.28 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383619863 |
| Warranty | 12 months |
| Shipping weight | 0.5 kg |
- 1 ×J-Link PRO PoE debug probe
- 1 ×Cavo USB
- 1 ×Cavo piatto a 20 pin, passo 2.54 mm (0.1 in), 18 cm
-
SEGGER 9-Pin Cortex-M Adapter (SKU 8.06.02)
Si collega direttamente alle schede con il piccolo header Cortex-M a 9 pin da 0.05" e mantiene JTAG, SWD e SWO. Adatta il connettore J-Link a 20 pin da 0.1".
£35View product
-
Adattatore SWD Tag-Connect ARM20-CTX da Arm 20 pin a TC2030-IDC
Nessun header di debug da montare su ogni scheda: il debug avviene tramite un footprint Tag-Connect a 6 pin. Adatta il connettore J-Link a 20 pin da 0.1" a un cavo TC2030-IDC o TC2030-IDC-NL, per SWD.
£40View product
-
Cavo Tag-Connect TC2030-IDC Plug-of-Nails a 6 pin
Nessun header da acquistare o saldare sulle schede: questo cavo plug-of-nails si appoggia a pressione sul footprint Tag-Connect. Si collega all'adattatore ARM20-CTX.
£42View product
-
Adattatore SEGGER STDC 14, da connettore di debug a 20 pin a 14 pin
Consente il debug diretto delle schede STM32 dotate del connettore STDC14 a 14 pin (quello utilizzato da ST-LINK V3), senza cavetti volanti.
£60View product
-
SEGGER J-Link JTAG Isolator
Isola la J-Link e il PC da un target che non condivide la stessa massa e li protegge dai picchi elettrici, come quelli tipici del controllo motori. Solo isolamento base fino a 1 kV DC. Solo JTAG, fino a 4 MHz: per i target SWD SEGGER offre isolatori SWD dedicati.
£226View product
SEGGER J-Link Pro PoE Debug Probe compared with Sonda di debug USB JTAG/SWD SEGGER J-Link BASE Classic , SEGGER J-Link BASE Compact Debug Probe , SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe , SEGGER J-Link PLUS Compact (8.19.28) , SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe , SEGGER J-Link PRO, sonda di debug Ethernet/USB ultraveloce and SEGGER J-Link WiFi Wireless Debug Probe (8.14.28) on 16 specifications.
| Specification | This product
SEGGER J-Link Pro PoE Debug Probe8.12.28Available to order |
Sonda di debug USB JTAG/SWD SEGGER J-Link BASE Classic8.08.00In stock |
SEGGER J-Link BASE Compact Debug Probe8.19.00In stock |
SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe8.08.28Available to order |
SEGGER J-Link PLUS Compact (8.19.28)8.19.28Available to order |
SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe8.16.28Available to order |
SEGGER J-Link PRO, sonda di debug Ethernet/USB ultraveloce8.12.00Available to order |
SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)8.14.28Available to order |
|---|---|---|---|---|---|---|---|---|
| USB host interface | USB 2.0 Hi-Speed, USB-C | USB 2.0 Hi-Speed, USB Type B | USB 2.0 Hi-Speed, USB-C | USB 2.0 Hi-Speed, USB Type B | USB 2.0 Hi-Speed, USB-C | USB 2.0 Hi-Speed, USB-C | USB 2.0 Hi-Speed, USB-C | USB 2.0 Hi-Speed, USB Type B |
| Network interface | 100 Mbit/s Ethernet | Nessuna (solo USB) | None (USB only) | None (USB only) | Nessuna (solo USB) | None (USB only) | Ethernet 100 Mbit/s | WiFi IEEE 802.11 b/g/n, 2.4 GHz |
| Power over Ethernet | IEEE 802.3af, Type 1, Class 3 | Non supportato | Not supported | Not supported | Non supportato | Not supported | Non supportato | Not supported |
| Ethernet isolation | Data lines isolated to IEEE 802.3, 1500 Vrms for 1 minute (shield not isolated) | Nessuna interfaccia Ethernet | No Ethernet interface | No Ethernet interface | Nessuna interfaccia Ethernet | No Ethernet interface | Linee dati isolate secondo IEEE 802.3, 1500 Vrms per 1 minuto (schermo non isolato) | No Ethernet interface |
| Size and weight | 123 x 68 x 30 mm, 125 g | 100 x 53 x 27 mm, 70 g | 46 x 46 x 17 mm, 20 g | 100 x 53 x 27 mm, 70 g | 46 x 46 x 17 mm, 20 g | 72 x 45 x 18 mm, 40 g | 100 x 53 x 27 mm, 73 g | 103 x 53 x 28 mm, 70 g |
| Target interface speed | Max. 50 MHz | Max. 15 MHz | Max. 15 MHz | Max. 15 MHz | Max. 15 MHz | Max. 50 MHz | Max. 50 MHz | Max. 15 MHz |
| Download speed | Up to 4 MB/s | Fino a 1 MB/s | Up to 1 MB/s | Up to 1 MB/s | Fino a 1 MB/s | Up to 4 MB/s | Fino a 4 MB/s | Up to 1 MB/s |
| SWO sampling frequency | Max. 100 MHz | Max. 30 MHz | Max. 30 MHz | Max. 30 MHz | Max. 30 MHz | Max. 100 MHz | Max. 100 MHz | Max. 30 MHz |
| Max. VCOM baud rate | 10 MBd | 115200 Bd | 115200 Bd | 115200 Bd | 115200 Bd | 10 MBd | 10 MBd | 115200 Bd |
| Target interface voltage (VIF) | 1.2 V to 5 V | Da 1.2 V a 5 V | 1.2 V to 5 V | 1.2 V to 5 V | Da 1.2 V a 5 V | 1.2 V to 5 V | Da 1.2 V a 5 V | 1.2 V to 5 V |
| Target supply | 5 V, max. 400 mA via USB; 5.25 V, max. 1000 mA via PoE | 5 V da USB, max. 300 mA | 5 V from USB, max. 300 mA | 5 V from USB, max. 300 mA | 5 V da USB, max. 300 mA | 5 V from USB, max. 300 mA | 5 V da USB, max. 300 mA | 5 V from USB, max. 300 mA |
| Power measurement | 200 kHz sampling, 50 µA resolution | Non supportata | Not supported | Not supported | Non supportato | 200 kHz sampling, 50 µA resolution | Campionamento 200 kHz, risoluzione 50 µA | Not supported |
| J-Flash / J-Flash SPI licence | Included | Non inclusa (upgrade da BASE a PLUS) | Not included (BASE to PLUS upgrade) | Included | Inclusa | Included | Inclusa | Included |
| Unlimited Flash Breakpoints | Included | Non incluso (upgrade da BASE a PLUS) | Not included (BASE to PLUS upgrade) | Included | Inclusi | Included | Inclusi | Included |
| Ozone licence | Included | Non inclusa (upgrade da BASE a PLUS) | Not included (BASE to PLUS upgrade) | Included | Inclusa | Included | Inclusa | Included |
| RDI licence | Included | Non inclusa (upgrade da BASE a PLUS) | Not included (BASE to PLUS upgrade) | Included | Inclusa | Included | Inclusa | Included |
| Price | £1,320 | £470 | £470 | £660 | £660 | £870 | £1,100 | £1,100 |
Domande e risposte
-
Can the J-Link PRO PoE Run Without a PoE Switch?
Yes. It can also be powered from USB. The target supply is then 5V at up to 400mA, rather than 5.25V at up to 1000mA under PoE.
-
How Does the Probe Get an IP Address?
By DHCP. In delivery condition the probe is configured for DHCP; for a direct connection to a host PC without DHCP, a static IP address can be set with J-Link Configurator.
-
Do I Need Special Software Licences?
No. Unlimited Flash Breakpoints, J-Flash, Ozone and J-Link GDB Server are included in the J-Link Software & Documentation Pack.
-
Does It Work with My IDE?
J-Link integrates with major IDEs and debuggers on Windows, Linux, and macOS via the J-Link DLL or GDB Server.
-
Can I Access It Remotely Over the Network?
Yes. Use Ethernet and SEGGER’s Remote Server for LAN/WAN access. PoE simplifies remote placement in racks and enclosures.
-
What Makes J-Link PRO PoE Suited to Test Farms?
PoE power plus switchable target power let you deploy many probes with one cable each and power-cycle DUTs remotely. For non-PoE Ethernet, see the J-Link Pro.
-
Can It Power the Target Device?
Yes. When PoE-powered, the probe can supply target power via the debug header or USB-A, enabling scripted power-cycles during automated tests.
-
How Fast Is Programming?
Up to 4 MB/s into RAM (target-dependent). This reduces turnaround between builds during CI and interactive debugging.
-
Does It Support SWD, JTAG, and SWO?
Yes. It supports standard ARM JTAG/SWD; SWO is available on supported MCUs for printf-style logging and event tracing.
-
How Does PRO PoE Differ From J-Link PRO?
Functionally similar, but PRO PoE adds PoE power, a USB-A power output and a higher-current target supply (up to 1 A when PoE-powered) for farm use.
No questions match your search.