Passa alle informazioni sul prodotto
1 su 5

SEGGER Microcontroller GmbH

SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe

SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe

4 MB/s downloads, up to 50 MHz JTAG/SWD, power profiling and VCOM for professional ARM Cortex debugging.

SKU: 8.16.28

Prezzo di listino
£870.00 exc VAT
£1,044.00 inc VAT
Prezzo di listino Prezzo scontato
£870.00 exc VAT
£1,044.00 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Caratteristiche principali

4 MB/s Download Speed
Up To 50 MHz JTAG/SWD
Unlimited Flash Breakpoints Licence
Built-In Power Profiling
Virtual COM (VCOM) Interface
Broad IDE & OS Support
SWO Support (Up To 100 MHz Sampling)

Overview

Overview

The J-Link ULTRA+ (listed by SEGGER as J-Link Ultra) is a USB-C JTAG/SWD debug probe with up to 50 MHz target interface speed and download speeds up to 4 MB/s, against 15 MHz and 1 MB/s for the J-Link PLUS. It adds target power measurement at 200 kHz with 50µA resolution, includes J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences, and debugs ARM Cortex-M, Cortex-A and Cortex-R, RISC-V, Renesas RX and Microchip PIC32 targets at 1.2V to 5V. For Ethernet access see the J-Link PRO.

How It Connects

This J-Link uses SEGGER's standard 20-pin 0.1" (2.54 mm) JTAG/SWD connector, used on every J-Link except the J-Link EDU mini. For SWD you need VTref (pin 1), SWDIO (pin 7), SWCLK (pin 9), nRESET (pin 15) and GND (pin 4), plus SWO (pin 13) if you want trace output. Full JTAG, SWD, cJTAG and SPI pin tables, and the adapters for 10-pin 0.05" Cortex Debug headers: SEGGER J-Link 20-pin connector pinout.

Download

User Manuals

  • SEGGER J-Flash PDF641 KB · 9.88 · Oct 2026
    Details

Throughput That Saves Time

4 MB/s downloads and up to 50 MHz SWD/JTAG minimise flash cycles and speed iterative debug.

Licences Included

Unlimited Flash Breakpoints, J-Flash and Ozone reduce extra tooling costs and setup friction.

Power Insight Built-In

Integrated current measurement surfaces energy hotspots early, aiding low-power optimisation.

The SEGGER J-Link ULTRA+ (part number 8.16.28, listed by SEGGER as J-Link Ultra) is a USB JTAG/SWD debug probe with up to 50 MHz target interface speed, download speeds up to 4 MB/s and a 1.2V to 5V target interface. It adds analogue power measurement at 200 kHz with 50µA resolution, and includes licences for J-Flash, Unlimited Flash Breakpoints, Ozone and RDI. It suits firmware teams who flash large images many times a day on ARM Cortex, RISC-V, Renesas RX and Microchip PIC32 targets and want to see current draw while they debug.

High-Speed JTAG/SWD Against the J-Link PLUS

SEGGER quotes up to 4 MB/s download speed and up to 50 MHz target interface speed for the ULTRA+, against up to 1 MB/s and 15 MHz for J-Link BASE and PLUS. SEGGER describes it as 100% compatible with J-Link PLUS, just faster, so existing J-Link projects and scripts carry over unchanged. Actual flash programming time depends on the target device. SWO is sampled at up to 100 MHz.

Power Measurement While You Debug

The ULTRA+ measures target current at a 200 kHz sampling frequency with 50µA resolution. On low-power designs that shows current spikes and sleep-mode entry during a debug session; with 50µA resolution it does not replace a dedicated meter for microamp sleep current. The probe can also supply the target with 5V at up to 300mA from the USB rail.

Interfaces, Supported Cores and Licences

The host link is USB 2.0 Hi-Speed over USB-C. The target uses the standard J-Link 20-pin 0.1" connector; pin assignments and adapters are in our SEGGER J-Link 20-pin connector pinout guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's cores list covers ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM11, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 and Cadence Tensilica Xtensa. J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences are included, along with RTT and VCOM (pins 5 and 17, SWD only).

Software and IDE Compatibility

J-Link software is free of charge, on Windows and Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others.

What Is in the Box

J-Link ULTRA+ probe, 20-pin 0.1" ribbon cable and a USB-C cable.

Specifications

Host interface USB 2.0 Hi-Speed, USB-C
Target connector JTAG/SWD 20-pin, 0.1" (2.54mm)
Supported debug interfaces JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2
Target interface voltage (VIF) 1.2V to 5V
Current drawn from VTref Less than 25µA
Target supply 5V (derived from USB), max. 300mA
Target interface speed Max. 50 MHz
SWO sampling frequency Max. 100 MHz
Download speed Up to 4 MB/s
Power measurement 200 kHz sampling frequency, 50µA resolution
Included licences J-Flash, Unlimited Flash Breakpoints, Ozone, RDI
Dimensions (without cables) 72mm x 45mm x 18mm
Weight (without cables) 40g
Operating temperature +5°C to +60°C
Storage temperature -20°C to +65°C
Relative humidity Max. 90% rH, non-condensing
EMC EN 55032, EN 55035
Host OS Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)

Limitations

  • USB only. For Ethernet access choose the J-Link PRO, or the J-Link PRO PoE for Power over Ethernet.
  • The 50 MHz and 4 MB/s figures are maximums; the usable interface clock and flash programming rate depend on the target device.
  • No ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.
  • VCOM is available only when debugging over SWD.

J-Link ULTRA+ Compared with PLUS and PRO

Model Host interface Download speed Target interface speed Ethernet Power over Ethernet Supported cores Price ex VAT
J-Link PLUS Classic USB 2.0 Hi-Speed Up to 1 MB/s Up to 15 MHz No No ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £660
J-Link ULTRA+ (J-Link Ultra, this product) USB 2.0 Hi-Speed Up to 4 MB/s Up to 50 MHz No No ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £870
J-Link PRO USB 2.0 Hi-Speed and 100 Mbit/s Ethernet Up to 4 MB/s Up to 50 MHz Yes No ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £1,100
J-Link PRO PoE USB 2.0 Hi-Speed and 100 Mbit/s Ethernet Up to 4 MB/s Up to 50 MHz Yes Yes, IEEE 802.3af ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £1,320

Typical Applications

Repeated download of multi-megabyte images to Cortex-A or Cortex-M7 targets with external flash during development. Watching active current and wake-up spikes on an nRF or STM32L low-power design while stepping through code; microamp sleep current still needs a dedicated meter. Debug at 50 MHz SWD on fast Cortex-M33 parts where a 15 MHz probe is the bottleneck.

Choose the J-Link PRO or PRO PoE instead if the probe must sit on a network rather than a USB port.

Order the J-Link ULTRA+ for £870 ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our SEGGER J-Link debug probes collection.

Last reviewed: 30 October 2026

Sources (8 manufacturer pages)
Host and Target Interface
Host interfaceUSB 2.0 Hi-Speed, USB-C
Target connectorJTAG/SWD 20-pin, 0.1" (2.54mm)
Target interface voltage (VIF)1.2V to 5V
Performance
Target interface speedMax. 50 MHz
SWO sampling frequencyMax. 100 MHz
Download speedUp to 4 MB/s
Power
Current drawn from VTrefLess than 25µA
Target supply5V (derived from USB), max. 300mA
Power measurement200 kHz sampling frequency, 50µA resolution
Software and Compatibility
Supported debug interfacesJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2
Included licencesJ-Flash, Unlimited Flash Breakpoints, Ozone, RDI
Host OSWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)
Physical
Dimensions (without cables)72mm x 45mm x 18mm
Weight (without cables)40g
Environmental
Operating temperature+5°C to +60°C
Storage temperature-20°C to +65°C
Relative humidityMax. 90% rH, non-condensing
EMCEN 55032, EN 55035
Ordering information
Part number (SKU)8.16.28
ManufacturerSEGGER Microcontroller GmbH
EAN5055383614691
Warranty12 months
Shipping weight0.5 kg
  • 1 ×J-Link Ultra debug probe
  • 1 ×Cavo USB
  • 1 ×Cavo piatto a 20 pin, passo 2.54 mm (0.1 in), 18 cm

SEGGER now sells the J-Link ULTRA+ under the name J-Link Ultra.

SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe compared with Sonda di debug USB JTAG/SWD SEGGER J-Link BASE Classic , SEGGER J-Link BASE Compact Debug Probe , SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe , SEGGER J-Link PLUS Compact (8.19.28) , SEGGER J-Link PRO, sonda di debug Ethernet/USB ultraveloce , SEGGER J-Link Pro PoE Debug Probe and SEGGER J-Link WiFi Wireless Debug Probe (8.14.28) on 16 specifications.

Specifications of SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe compared with Sonda di debug USB JTAG/SWD SEGGER J-Link BASE Classic , SEGGER J-Link BASE Compact Debug Probe , SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe , SEGGER J-Link PLUS Compact (8.19.28) , SEGGER J-Link PRO, sonda di debug Ethernet/USB ultraveloce , SEGGER J-Link Pro PoE Debug Probe and SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)
SpecificationThis product SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe8.16.28Available to order Sonda di debug USB JTAG/SWD SEGGER J-Link BASE Classic8.08.00In stock SEGGER J-Link BASE Compact Debug Probe8.19.00In stock SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe8.08.28Available to order SEGGER J-Link PLUS Compact (8.19.28)8.19.28Available to order SEGGER J-Link PRO, sonda di debug Ethernet/USB ultraveloce8.12.00Available to order SEGGER J-Link Pro PoE Debug Probe8.12.28Available to order SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)8.14.28Available to order
USB host interface USB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB Type BUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB Type BUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB Type B
Network interface None (USB only)Nessuna (solo USB)None (USB only)None (USB only)Nessuna (solo USB)Ethernet 100 Mbit/s100 Mbit/s EthernetWiFi IEEE 802.11 b/g/n, 2.4 GHz
Power over Ethernet Not supportedNon supportatoNot supportedNot supportedNon supportatoNon supportatoIEEE 802.3af, Type 1, Class 3Not supported
Ethernet isolation No Ethernet interfaceNessuna interfaccia EthernetNo Ethernet interfaceNo Ethernet interfaceNessuna interfaccia EthernetLinee dati isolate secondo IEEE 802.3, 1500 Vrms per 1 minuto (schermo non isolato)Data lines isolated to IEEE 802.3, 1500 Vrms for 1 minute (shield not isolated)No Ethernet interface
Size and weight 72 x 45 x 18 mm, 40 g100 x 53 x 27 mm, 70 g46 x 46 x 17 mm, 20 g100 x 53 x 27 mm, 70 g46 x 46 x 17 mm, 20 g100 x 53 x 27 mm, 73 g123 x 68 x 30 mm, 125 g103 x 53 x 28 mm, 70 g
Target interface speed Max. 50 MHzMax. 15 MHzMax. 15 MHzMax. 15 MHzMax. 15 MHzMax. 50 MHzMax. 50 MHzMax. 15 MHz
Download speed Up to 4 MB/sFino a 1 MB/sUp to 1 MB/sUp to 1 MB/sFino a 1 MB/sFino a 4 MB/sUp to 4 MB/sUp to 1 MB/s
SWO sampling frequency Max. 100 MHzMax. 30 MHzMax. 30 MHzMax. 30 MHzMax. 30 MHzMax. 100 MHzMax. 100 MHzMax. 30 MHz
Max. VCOM baud rate 10 MBd115200 Bd115200 Bd115200 Bd115200 Bd10 MBd10 MBd115200 Bd
Target interface voltage (VIF) 1.2 V to 5 VDa 1.2 V a 5 V1.2 V to 5 V1.2 V to 5 VDa 1.2 V a 5 VDa 1.2 V a 5 V1.2 V to 5 V1.2 V to 5 V
Target supply 5 V from USB, max. 300 mA5 V da USB, max. 300 mA5 V from USB, max. 300 mA5 V from USB, max. 300 mA5 V da USB, max. 300 mA5 V da USB, max. 300 mA5 V, max. 400 mA via USB; 5.25 V, max. 1000 mA via PoE5 V from USB, max. 300 mA
Power measurement 200 kHz sampling, 50 µA resolutionNon supportataNot supportedNot supportedNon supportatoCampionamento 200 kHz, risoluzione 50 µA200 kHz sampling, 50 µA resolutionNot supported
J-Flash / J-Flash SPI licence IncludedNon inclusa (upgrade da BASE a PLUS)Not included (BASE to PLUS upgrade)IncludedInclusaInclusaIncludedIncluded
Unlimited Flash Breakpoints IncludedNon incluso (upgrade da BASE a PLUS)Not included (BASE to PLUS upgrade)IncludedInclusiInclusiIncludedIncluded
Ozone licence IncludedNon inclusa (upgrade da BASE a PLUS)Not included (BASE to PLUS upgrade)IncludedInclusaInclusaIncludedIncluded
RDI licence IncludedNon inclusa (upgrade da BASE a PLUS)Not included (BASE to PLUS upgrade)IncludedInclusaInclusaIncludedIncluded
Price£870 £470 £470 £660 £660 £1,100 £1,320 £1,100
  • SEGGER Ozone Debugger PDF4.2 MB · 3.50 · Jul 2026
    Details
  • SEGGER J-Link and J-Trace PDF4.1 MB · 9.88 · Oct 2026
    Details
  • SEGGER SystemView PDF2.2 MB · 4.10 · Mar 2026
    Details
  • SEGGER J-Link GDB Server Protocol Extension User Manual PDF159 KB · 1.00 Rev 0 · Mar 2018
    Details
Domande ai nostri ingegneri

Domande e risposte

11 questions
  • What Operating Systems Are Supported?

    Windows, Linux and macOS (including Apple Silicon) are supported with the J-Link Software & Documentation Pack.

    Answered by John LeggUpdated 12 Oct 2026
  • Does ULTRA+ Include Unlimited Flash Breakpoints?

    Yes, the licence is included, enabling more than the MCU’s hardware breakpoint limit when debugging in flash.

    Answered by John LeggUpdated 12 Oct 2026
  • Can ULTRA+ Power a Target Board?

    Yes, via the 20-pin header’s 5 V output (up to 300 mA), useful for small targets and evaluation boards.

    Answered by John LeggUpdated 12 Oct 2026
  • Is SWO Supported for Real-Time Logs?

    Yes. SWO is supported (with high sampling rates) for printf-style logging and event tracing on supported MCUs.

    Answered by John LeggUpdated 12 Oct 2026
  • Which Tool Should I Choose If I Need Ethernet and Remote Use?

    Consider the SEGGER J-Link PRO for Ethernet and remote workflows.

    Answered by John LeggUpdated 12 Oct 2026
  • How Fast Is Flash Programming with ULTRA+ in Practice?

    The probe supports downloads up to 4 MB/s into RAM. Actual speed depends on the MCU, flash and memory algorithm performance.

    Answered by John LeggUpdated 12 Oct 2026
  • Is ETM Instruction Trace Available on ULTRA+?

    No. For ETM streaming trace and code coverage, use the SEGGER J-Trace PRO.

    Answered by John LeggUpdated 12 Oct 2026
  • How Does ULTRA+ Compare to Lauterbach Tools?

    Lauterbach is a third-party manufacturer, so refer to its documentation for its trace features. ULTRA+ focuses on fast JTAG/SWD debug with integrated power profiling and does not provide ETM instruction trace (that needs a J-Trace).

    Answered by John LeggUpdated 12 Oct 2026

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.