
Caratteristiche principali
Overview
The J-Trace PRO Cortex-M is a streaming trace probe for ARM Cortex-M microcontrollers, from Cortex-M0 to Cortex-M85, with ETM trace. It connects over USB 3.0 SuperSpeed or Gigabit Ethernet, downloads at up to 4.0 MB/s and has a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling.
The SEGGER J-Trace PRO Cortex-M (part number 8.18.00) is a streaming trace probe for ARM Cortex-M microcontrollers, from Cortex-M0 to Cortex-M85, with ETM trace, a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams chasing intermittent faults, measuring code coverage or profiling Cortex-M applications.
Streaming ETM Trace for Cortex-M Microcontrollers
Streaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists ETM and ETB trace for Cortex-M on this model. The supported cores list covers Cortex-M0, M0+, M1, M3, M4, M7, M23, M33, M52, M55 and M85, plus SC000 and SC300. Cortex-A and RISC-V cores are not supported.
Debug and Trace Connectors
The probe has two target connectors: the 20-pin JTAG/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05" JTAG/SWD and Trace connector that carries the trace clock and four trace data lines. Targets with a 38-pin Mictor header connect through the J-Trace Mictor 38 Adapter. Pin assignments for the 20-pin connector are in our SEGGER J-Link 20-pin connector pinout guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop and SWO, and the probe can supply 5V to the target.
Full J-Link PRO Debug Capability
J-Trace PRO Cortex-M is also a complete J-Link. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints, and supports Real Time Transfer (RTT) and monitor-mode debugging on ARMv7-M and ARMv8-M. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.
The Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.
What's Included
- J-Trace PRO Cortex-M probe
- Cortex-M Trace Reference Board
- 20-pin 0.05" target ribbon cable
- 20-pin 0.1" target ribbon cable
- Micro USB cable
- USB 3.0 cable
Specifications
| Host interface | USB 3.0 SuperSpeed; Gigabit Ethernet |
|---|---|
| Target interface | JTAG/SWD 20-pin (14-pin adapter available); JTAG/SWD + Trace 19-pin 0.05" |
| Trace | Streaming trace; ETM and ETB (Cortex-M) |
| Supported cores | ARM Cortex-M0 to Cortex-M85, SC000, SC300 |
| Target interface voltage (VIF) | 1.2V to 5V |
| Target interface speed | Max. 50 MHz |
| Download speed | Up to 4.0 MB/s |
| Power supply | USB powered, max. 400mA |
| Reset type | Open drain with 100 Ohm series resistor, can be pulled low or tristated |
| Trace capacitive load | 3 pF J-Trace plus 8 pF cable (typical) |
| Dimensions (without cables) | 123mm x 68mm x 30mm |
| Weight (without cables) | 120g |
| Operating temperature | +5°C to +60°C |
| Storage temperature | -20°C to +65°C |
| Relative humidity | Max. 90% rH, non-condensing |
| EMC | EN 55022, EN 55024 |
| Host OS | Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon) |
Limitations
- Cortex-M only. For Cortex-A or Cortex-R trace choose the J-Trace PRO Cortex; for RISC-V, the J-Trace PRO or J-Trace PRO RISC-V.
- Trace needs the target to implement ETM and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.
- No VCOM and no CMSIS-DAP v1 (HID) mode.
- Most IDEs offer little or no trace analysis; plan on Ozone for coverage and profiling.
- The Mictor 38 adapter is a separate purchase.
J-Trace PRO Cortex-M Compared with the Other J-Trace PRO Models
| Model | Trace architectures | Cortex-M Trace Reference Board in box | Price ex VAT |
|---|---|---|---|
| J-Trace PRO Cortex-M (this product) | ARM Cortex-M | Yes | £1,515 |
| J-Trace PRO Cortex | ARM Cortex-A, Cortex-R and Cortex-M | Yes | £2,005 |
| J-Trace PRO | ARM Cortex-A, Cortex-R, Cortex-M and RISC-V | Yes | £3,005 |
| J-Trace PRO RISC-V | RISC-V (RV32, RV64) | Not listed | £2,005 |
Typical Applications
Instruction trace on an STM32H7 (Cortex-M7) or i.MX RT1050 board to find an intermittent hard fault after hours of running. Live code coverage on a Cortex-M33 design to show which code paths a test suite exercised. Live profiling of an RTOS application on a Cortex-M4 to find the functions using the most CPU time.
Choose the J-Trace PRO Cortex-M when all your trace targets are Cortex-M microcontrollers.
Order the J-Trace PRO Cortex-M for £1,515 ex VAT. Check your device's trace pins, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Reset type | Open drain with 100 Ohm series resistor, can be pulled low or tristated |
| Host and Target Interface | |
| Host interface | USB 3.0 SuperSpeed; Gigabit Ethernet |
| Target interface | JTAG/SWD 20-pin (14-pin adapter available); JTAG/SWD + Trace 19-pin 0.05" |
| Target interface voltage (VIF) | 1.2V to 5V |
| Performance | |
| Trace | Streaming trace; ETM and ETB (Cortex-M) |
| Target interface speed | Max. 50 MHz |
| Download speed | Up to 4.0 MB/s |
| Trace capacitive load | 3 pF J-Trace plus 8 pF cable (typical) |
| Power | |
| Power supply | USB powered, max. 400mA |
| Software and Compatibility | |
| Supported cores | ARM Cortex-M0 to Cortex-M85, SC000, SC300 |
| Host OS | Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon) |
| Physical | |
| Dimensions (without cables) | 123mm x 68mm x 30mm |
| Weight (without cables) | 120g |
| Environmental | |
| Operating temperature | +5°C to +60°C |
| Storage temperature | -20°C to +65°C |
| Relative humidity | Max. 90% rH, non-condensing |
| EMC | EN 55022, EN 55024 |
| Ordering information | |
| Part number (SKU) | 8.18.00 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383615353 |
| Warranty | 12 months |
| Shipping weight | 0.5 kg |
- 1 ×J-Trace PRO Cortex-M trace probe
- 1 ×Cortex-M Reference Board
- 1 ×20-pin, 0.05" target ribbon cable
- 1 ×20-pin, 0.1" target ribbon cable
- 1 ×Micro USB cable
- 1 ×USB 3.0 cable
SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00) compared with SEGGER J-Trace PRO Cortex Trace Debugger , SEGGER J-Trace PRO RISC-V Debug Probe and SEGGER J-Trace PRO Trace Probe on 15 specifications.
| Specification | This product
SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00)8.18.00In stock |
SEGGER J-Trace PRO Cortex Trace Debugger8.20.00Available to order |
SEGGER J-Trace PRO RISC-V Debug Probe8.22.00Available to order |
SEGGER J-Trace PRO Trace Probe8.24.00Available to order |
|---|---|---|---|---|
| Debug architectures | ARM Cortex-M (incl. SC000, SC300) | ARM Cortex-A, Cortex-R and Cortex-M | RISC-V (RV32, RV64) | ARM Cortex-A/R/M, legacy ARM, ARM China STAR-MC, RISC-V, Cadence Tensilica, Microchip PIC32, Renesas RX and RH850, Silicon Labs EFM8 |
| ARM Cortex trace | ETM, ETB (Cortex-M only) | ETM, PTM, ETB | Not supported | ETM, PTM, ETB |
| RISC-V trace | Not supported | Not supported | N-Trace BTM | N-Trace BTM |
| Trace pins | 4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector | 4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector | 4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector | 4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector |
| Streaming trace | Supported | Supported | Supported | Supported |
| On-board trace buffer | 64 MB | 64 MB | 64 MB | 64 MB |
| Host interface | USB 3.0 SuperSpeed and Gigabit Ethernet | USB 3.0 SuperSpeed and Gigabit Ethernet | USB 3.0 SuperSpeed and Gigabit Ethernet | USB 3.0 SuperSpeed and Gigabit Ethernet |
| Target interface speed | Max. 50 MHz | Max. 50 MHz | Max. 50 MHz | Max. 50 MHz |
| Download speed | Up to 4 MB/s | Up to 4 MB/s | Up to 4 MB/s | Up to 4 MB/s |
| Target interface voltage (VIF) | 1.2 V to 5 V | 1.2 V to 5 V | 1.2 V to 5 V | 1.2 V to 5 V |
| SWO | Supported | Supported | Not supported | Supported |
| ARM monitor mode debugging | ARMv7-M and ARMv8-M | ARMv7-M and ARMv8-M | Not supported | ARMv7-M and ARMv8-M |
| 5 V target supply | Supported | Supported | Supported | Supported |
| Trace reference board in the box | Cortex-M Trace Reference Board | Cortex-M Trace Reference Board | Not included | Cortex-M Trace Reference Board |
| Software licences | Full set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone included | Full set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone included | Full set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone included | Full set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone included |
| Price | £1,515 | £2,005 | £2,005 | £3,005 |
Domande e risposte
-
Can the J-Trace PRO Cortex-M Be Used as a Normal J-Link Debug Probe?
Yes. It has all J-Link debug probe capabilities and the full set of J-Link PRO licences, including Unlimited Flash Breakpoints, and works with J-Link software and J-Link compatible IDEs.
-
What Is the Difference Between the J-Trace PRO Cortex-M and the J-Trace PRO Cortex?
Core support. The Cortex-M model supports Cortex-M cores only; SEGGER lists Cortex-A and Cortex-R cores and PTM trace for the Cortex model. Both share the same housing, host interfaces and target connectors.
-
What Does the Target Need for Trace?
The device must implement ETM trace and the trace clock and data pins must be wired to the 19-pin 0.05" connector or a Mictor header. SEGGER publishes a list of tested devices with ready-made example projects.
-
How Fast Is the Flash Programming Compared to Standard J-Link?
The J-Trace PRO achieves up to 4MB/s download speeds, significantly faster than standard debug probes. This reduces development iteration time when loading large applications or frequent code updates.
-
Can I Debug Remotely Over Ethernet?
Yes, the integrated Gigabit Ethernet interface enables remote debugging across networks. This is particularly useful for accessing targets in test environments or when the development PC cannot be physically connected.
-
What Trace Analysis Features Does the Included Ozone Debugger Provide?
Ozone offers live code profiling (execution timing and hotspot analysis), live code coverage (instruction-level coverage tracking), and historical trace browsing with source code correlation.
-
Is the J-Trace PRO Cortex-M Compatible with Multi-Core Systems?
This model traces Cortex-M cores only. For Cortex-A, Cortex-R or RISC-V targets, consider the J-Trace PRO (8.24.00), SEGGER's all-in-one model.
-
What's Included in the Box with the J-Trace PRO Cortex-M?
The package includes:
- J-Trace PRO hardware
- Cortex-M Trace Reference Board
- USB 3.0 cable
- Micro USB cable
- 20-pin 0.1" JTAG/SWD ribbon cable
- 20-pin 0.05" trace cable
- Ozone and J-Flash licences (bundled, downloaded with the J-Link software)
-
What ARM Cortex-M Cores Does the J-Trace PRO Cortex-M Support?
The probe supports Cortex-M cores including M0, M0+, M1, M3, M4, M7, M23, M33, M52, M55, and M85 cores. It works with Cortex-M devices on SEGGER's supported device list that bring out the ETM trace pins; devices not on the tested list will usually still trace.
-
How Does Streaming Trace Differ From Traditional Trace Buffers?
Traditional trace probes capture limited data in internal buffers. Streaming trace continuously transfers data to the host PC via USB 3.0, enabling unlimited capture periods with no limit on the amount of trace data.
-
Can I Use the J-Trace PRO Cortex-M with My Existing IDE?
Yes, it integrates with all major development environments including IAR Embedded Workbench, Keil µVision, Eclipse-based IDEs, and GCC toolchains. The included Ozone debugger works independently of any IDE.
-
What's the Difference Between This and the Regular J-Trace PRO?
The Cortex-M model is optimised for Cortex-M cores. The J-Trace PRO (8.24.00) also supports Cortex-A, Cortex-R and RISC-V architectures.
-
Do I Need Special Target Hardware Modifications for Trace?
Your target must expose the ETM trace pins (typically TRACECLK and TRACEDATA[3:0]) on a connector. Many development boards include these signals on debug headers. No target code modifications are required.
No questions match your search.