Passa alle informazioni sul prodotto
1 su 5

SEGGER Microcontroller GmbH

SEGGER J-Trace PRO Cortex Trace Debugger

SEGGER J-Trace PRO Cortex Trace Debugger

The ARM Cortex trace probe

SKU: 8.20.00

Prezzo di listino
£2,005.00 exc VAT
£2,406.00 inc VAT
Prezzo di listino Prezzo scontato
£2,005.00 exc VAT
£2,406.00 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Caratteristiche principali

Unlimited Streaming Trace with 64MB Buffer
Dual High-Speed Interfaces: SuperSpeed USB 3.0 (up to 4MB/s) and Gigabit Ethernet interfaces provide maximum performance and remote debugging capabilities.
Live Code Profiling and Coverage: Real-time instruction-level analysis showing execution frequency and code coverage with live updates during target operation.
Unlimited Flash Breakpoints: Set unlimited breakpoints in flash memory using intelligent optimisation techniques, eliminating traditional hardware breakpoint limitations.
Cortex-A, Cortex-R and Cortex-M Support
Professional Software Suite Included
Advanced Fault Analysis Captures infrequent, hard-to-reproduce bugs over unlimited periods, particularly valuable when program flow stops in fault states.

Overview

The J-Trace PRO Cortex is a streaming trace probe for ARM Cortex-A, Cortex-R and Cortex-M devices, with ETM and PTM trace. It connects over USB 3.0 SuperSpeed or Gigabit Ethernet, downloads at up to 4.0 MB/s and has a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling.

Download

User Manuals

  • SEGGER J-Link and J-Trace PDF4.1 MB · 9.88 · Oct 2026
    Details

The SEGGER J-Trace PRO Cortex (part number 8.20.00) is a streaming trace probe for ARM Cortex-A, Cortex-R and Cortex-M devices, with ETM and PTM trace, a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams working across Cortex-A, Cortex-R and Cortex-M targets.

Streaming Trace for Cortex-A, Cortex-R and Cortex-M

Streaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists ETM, PTM and ETB trace for ARM Cortex on this model. The supported cores list covers Cortex-A5 to Cortex-A17, Cortex-A53, A55, A57, A72 and A76, Cortex-R4, R5, R8, R52 and R82, Cortex-M0 to Cortex-M85, and SC000 and SC300. RISC-V is not supported; use the J-Trace PRO or J-Trace PRO RISC-V for those targets.

Debug and Trace Connectors

The probe has two target connectors: the 20-pin JTAG/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05" JTAG/SWD and Trace connector that carries the trace clock and four trace data lines. Targets with a 38-pin Mictor header connect through the J-Trace Mictor 38 Adapter. Pin assignments for the 20-pin connector are in our SEGGER J-Link 20-pin connector pinout guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop and SWO, and the probe can supply 5V to the target.

Full J-Link PRO Debug Capability

J-Trace PRO Cortex is also a complete J-Link. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints, and supports Real Time Transfer (RTT) and monitor-mode debugging on ARMv7-M and ARMv8-M. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.

The Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.

What's Included

  • J-Trace PRO Cortex probe
  • Cortex-M Trace Reference Board
  • 20-pin 0.05" target ribbon cable
  • 20-pin 0.1" target ribbon cable
  • Micro USB cable
  • USB 3.0 cable

Specifications

Host interface USB 3.0 SuperSpeed; Gigabit Ethernet
Target interface JTAG/SWD 20-pin (14-pin adapter available); JTAG/SWD + Trace 19-pin 0.05" (38-pin Mictor adapter available)
Trace Streaming trace; ETM, PTM and ETB (ARM Cortex)
Supported cores ARM Cortex-A, Cortex-R, Cortex-M, SC000, SC300
Target interface voltage (VIF) 1.2V to 5V
Target interface speed Max. 50 MHz
Download speed Up to 4.0 MB/s
Power supply USB powered, max. 400mA
Reset type Open drain with 100 Ohm series resistor, can be pulled low or tristated
Trace capacitive load 3 pF J-Trace plus 8 pF cable (typical)
Dimensions (without cables) 123mm x 68mm x 30mm
Weight (without cables) 120g
Operating temperature +5°C to +60°C
Storage temperature -20°C to +65°C
Relative humidity Max. 90% rH, non-condensing
EMC EN 55022, EN 55024
Host OS Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)

Limitations

  • No RISC-V support; choose the J-Trace PRO or the J-Trace PRO RISC-V.
  • Trace needs the target to implement trace hardware and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.
  • No VCOM and no CMSIS-DAP v1 (HID) mode.
  • Most IDEs offer little or no trace analysis; plan on Ozone for coverage and profiling.
  • The Mictor 38 adapter is a separate purchase.

J-Trace PRO Cortex Compared with the Other J-Trace PRO Models

Model Trace architectures Cortex-M Trace Reference Board in box Price ex VAT
J-Trace PRO Cortex (this product) ARM Cortex-A, Cortex-R and Cortex-M Yes £2,005
J-Trace PRO ARM Cortex-A, Cortex-R, Cortex-M and RISC-V Yes £3,005
J-Trace PRO Cortex-M ARM Cortex-M Yes £1,515
J-Trace PRO RISC-V RISC-V (RV32, RV64) Not listed £2,005

Typical Applications

PTM trace on a Cortex-A9, or ETM trace on a Cortex-A53, application processor to follow program flow into a crash. ETM trace on a Cortex-R5 or Cortex-R52 real-time core to measure interrupt timing over a long run. Live code coverage on a Cortex-M4 or Cortex-M33 microcontroller to show which paths a test suite exercised.

Choose the J-Trace PRO Cortex when your targets include Cortex-A or Cortex-R cores; for Cortex-M only work, compare the J-Trace PRO Cortex-M.

Order the J-Trace PRO Cortex for £2,005 ex VAT. Check your device's trace pins, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Reset typeOpen drain with 100 Ohm series resistor, can be pulled low or tristated
Host and Target Interface
Host interfaceUSB 3.0 SuperSpeed; Gigabit Ethernet
Target interfaceJTAG/SWD 20-pin (14-pin adapter available); JTAG/SWD + Trace 19-pin 0.05" (38-pin Mictor adapter available)
Target interface voltage (VIF)1.2V to 5V
Performance
TraceStreaming trace; ETM, PTM and ETB (ARM Cortex)
Target interface speedMax. 50 MHz
Download speedUp to 4.0 MB/s
Trace capacitive load3 pF J-Trace plus 8 pF cable (typical)
Power
Power supplyUSB powered, max. 400mA
Software and Compatibility
Supported coresARM Cortex-A, Cortex-R, Cortex-M, SC000, SC300
Host OSWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)
Physical
Dimensions (without cables)123mm x 68mm x 30mm
Weight (without cables)120g
Environmental
Operating temperature+5°C to +60°C
Storage temperature-20°C to +65°C
Relative humidityMax. 90% rH, non-condensing
EMCEN 55022, EN 55024
Ordering information
Part number (SKU)8.20.00
ManufacturerSEGGER Microcontroller GmbH
EAN5055383619535
Warranty12 months
Shipping weight1.0 kg
  • 1 ×J-Trace PRO Cortex-A/R/M trace probe
  • 1 ×Cortex-M Reference Board
  • 1 ×20-pin, 0.05" target ribbon cable
  • 1 ×20-pin, 0.1" target ribbon cable
  • 1 ×Micro USB cable
  • 1 ×USB 3.0 cable

SEGGER J-Trace PRO Cortex Trace Debugger compared with SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00) , SEGGER J-Trace PRO RISC-V Debug Probe and SEGGER J-Trace PRO Trace Probe on 15 specifications.

Specifications of SEGGER J-Trace PRO Cortex Trace Debugger compared with SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00) , SEGGER J-Trace PRO RISC-V Debug Probe and SEGGER J-Trace PRO Trace Probe
SpecificationThis product SEGGER J-Trace PRO Cortex Trace Debugger8.20.00Available to order SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00)8.18.00In stock SEGGER J-Trace PRO RISC-V Debug Probe8.22.00Available to order SEGGER J-Trace PRO Trace Probe8.24.00Available to order
Debug architectures ARM Cortex-A, Cortex-R and Cortex-MARM Cortex-M (incl. SC000, SC300)RISC-V (RV32, RV64)ARM Cortex-A/R/M, legacy ARM, ARM China STAR-MC, RISC-V, Cadence Tensilica, Microchip PIC32, Renesas RX and RH850, Silicon Labs EFM8
ARM Cortex trace ETM, PTM, ETBETM, ETB (Cortex-M only)Not supportedETM, PTM, ETB
RISC-V trace Not supportedNot supportedN-Trace BTMN-Trace BTM
Trace pins 4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector4-bit (TRACECLK, TRACEDATA[0..3]) on 19-pin 0.05" connector
Streaming trace SupportedSupportedSupportedSupported
On-board trace buffer 64 MB64 MB64 MB64 MB
Host interface USB 3.0 SuperSpeed and Gigabit EthernetUSB 3.0 SuperSpeed and Gigabit EthernetUSB 3.0 SuperSpeed and Gigabit EthernetUSB 3.0 SuperSpeed and Gigabit Ethernet
Target interface speed Max. 50 MHzMax. 50 MHzMax. 50 MHzMax. 50 MHz
Download speed Up to 4 MB/sUp to 4 MB/sUp to 4 MB/sUp to 4 MB/s
Target interface voltage (VIF) 1.2 V to 5 V1.2 V to 5 V1.2 V to 5 V1.2 V to 5 V
SWO SupportedSupportedNot supportedSupported
ARM monitor mode debugging ARMv7-M and ARMv8-MARMv7-M and ARMv8-MNot supportedARMv7-M and ARMv8-M
5 V target supply SupportedSupportedSupportedSupported
Trace reference board in the box Cortex-M Trace Reference BoardCortex-M Trace Reference BoardNot includedCortex-M Trace Reference Board
Software licences Full set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone includedFull set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone includedFull set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone includedFull set of J-Link PRO licences (incl. Unlimited Flash Breakpoints); Ozone included
Price£2,005 £1,515 £2,005 £3,005
  • SEGGER Ozone Debugger PDF4.2 MB · 3.50 · Jul 2026
    Details
  • SEGGER SystemView PDF2.2 MB · 4.10 · Mar 2026
    Details
  • SEGGER J-Link GDB Server Protocol Extension User Manual PDF159 KB · 1.00 Rev 0 · Mar 2018
    Details
Domande ai nostri ingegneri

Domande e risposte

13 questions
  • What Is the Difference Between the J-Trace PRO Cortex and the J-Trace PRO Cortex-M?

    Core support. SEGGER lists Cortex-A and Cortex-R cores and PTM trace for the Cortex model; the Cortex-M model supports Cortex-M cores only. Both share the same housing, host interfaces and target connectors.

    Answered by John LeggUpdated 16 Nov 2026
  • What Does the Target Need for Trace?

    The device must implement ETM or PTM trace and the trace clock and data pins must be wired to the 19-pin 0.05" connector or a Mictor header. SEGGER publishes a list of tested devices with ready-made example projects.

    Answered by John LeggUpdated 16 Nov 2026
  • What Interfaces Does the J-Trace PRO Cortex Provide and Why Are They Advantageous?

    It has two interfaces: SuperSpeed USB 3.0 and Gigabit Ethernet.

    • USB 3.0 gives continuous streaming trace at full system clock and download speeds up to 4MB/s, avoiding the bottleneck of USB 2.0.
    • Gigabit Ethernet allows remote debugging over a network, for targets in test chambers, production environments or other locations.

    Remote debugging is available over Ethernet as well as USB; streaming trace uses the USB 3.0 interface. There are also two target connectors: a 20-pin debug connector and a combined 19-pin debug and trace connector. Only one target connector can be used at a time.

    Answered by John LeggUpdated 12 Oct 2026
  • How Does Unlimited Flash Breakpoints Work in the J-Trace PRO Cortex?

    Unlimited Flash Breakpoints lets you set as many breakpoints as you need when debugging code that runs from flash memory.

    The probe uses hardware breakpoints first (typically 4 to 6 on Cortex-M), then switches to software breakpoints in flash once those are used up. It uses instruction set simulation, flash caching and selective sector reprogramming to minimise flash write cycles. In practice you won't notice when you've passed the hardware breakpoint limit, and debugging in flash feels much like debugging in RAM.

    It works with internal and external flash, including memory-mapped QSPI flash where hardware breakpoints cannot be used. This matters when the application has to run from flash because there isn't enough RAM.

    Answered by John LeggUpdated 12 Oct 2026
  • What Software Tools Are Included with the J-Trace PRO Cortex?

    It comes with SEGGER's professional software suite at no extra cost:

    • Ozone, a graphical debugger and performance analyser with trace visualisation, code profiling, coverage analysis and instruction-level debugging. It needs no additional licences.
    • J-Flash and J-Flash SPI for high-speed programming of internal and external flash.
    • J-Link Software and Documentation Package for Windows, macOS and Linux, with regular free updates.

    The software works with popular IDEs including Keil, IAR, Embedded Studio and Eclipse through standard debugging interfaces.

    Answered by John LeggUpdated 12 Oct 2026
  • Which Cortex Architectures and Devices Does the J-Trace PRO Cortex Support?

    It supports Cortex-A, Cortex-R and Cortex-M architectures:

    • Cortex-M: M0, M0+, M1, M3, M4, M7, M23 and M33
    • Cortex-A: A5, A7, A8, A9, A12, A15 and A17
    • Cortex-R: R4 and R5

    The tested devices list covers manufacturers such as STMicroelectronics, NXP, Infineon, Atmel, AmbiqMicro and many others. SEGGER adds device support through regular software updates to the J-Link software package.

    Answered by John LeggUpdated 12 Oct 2026
  • What Are the Power and Connectivity Specifications for the J-Trace PRO Cortex?

    The J-Trace PRO Cortex is USB-powered (maximum 400mA), so most configurations need no external power supply. Other specifications:

    • Target interface voltage: 1.2V to 5V
    • Maximum trace clock: 150MHz
    • Data input rise/fall time: maximum 20ns
    • Clock rise/fall time: maximum 10ns
    • Dimensions: 123mm × 68mm × 30mm
    • Weight: 120g without cables
    • Operating temperature: +5°C to +60°C
    • Storage temperature: -20°C to +65°C
    • EMC standards: EN 55022, EN 55024
    Answered by John LeggUpdated 12 Oct 2026
  • What Is the Segger J-Trace PRO Cortex Debugger and What Makes It Unique?

    The SEGGER J-Trace PRO Cortex is a professional streaming trace probe for Cortex-A/R/M-based microcontrollers. What sets it apart:

    • SuperSpeed USB 3.0 interface for continuous, unlimited streaming trace with full trace clock support, so you aren't limited by internal buffers or slow data transfer
    • 64MB on-board trace buffer
    • All J-Link debug functionality combined with trace analysis
    • Download speeds up to 4MB/s
    Answered by John LeggUpdated 12 Oct 2026
  • How Does the J-Trace PRO Cortex Compare to Higher-end Competitors Like Lauterbach TRACE32?

    The J-Trace PRO Cortex can be running within 15 minutes using SEGGER's Ozone debugger. In our experience, TRACE32 has a longer learning curve. The J-Trace PRO Cortex offers:

    • Windows, macOS and Linux support
    • SuperSpeed USB 3.0 and Gigabit Ethernet interfaces
    • Streaming trace at full system clock with real-time analysis
    • Live code profiling and coverage analysis
    Answered by John LeggUpdated 12 Oct 2026
  • Can the J-Trace PRO Cortex Capture Infrequent, Hard-to-Reproduce Bugs?

    Yes. Its unlimited streaming trace can record complete traces over hours or even days, so you can catch intermittent faults that a buffer-limited debugger would miss.

    When program flow "runs off the rails" and stops in a fault state, you get the trace data leading up to the failure. Continuous streaming via USB 3.0 runs at the full trace clock with no limit on the amount of trace data, and the 64MB on-board buffer adds extra margin. This helps with systems using communication stacks such as Ethernet or USB, where bugs may only appear under specific timing conditions or after long operation.

    Answered by John LeggUpdated 12 Oct 2026
  • What Trace Analysis Features Does the J-Trace PRO Cortex Provide for Code Optimisation?

    It provides Live Code Profiling and Live Code Coverage, shown in the Ozone debugger.

    • Live Code Profiling shows in real time which instructions execute and how often, so you can find performance hotspots.
    • Live Code Coverage shows at instruction level which parts of the code have run, which helps with regulatory requirements and thorough testing.
    • Ozone displays execution counters live alongside the source code as the application runs.
    • Instruction-level trace lets you verify code paths, analyse function call durations and measure CPU load per function.

    All trace data can be exported for further analysis or compliance documentation, for example on safety-critical projects.

    Answered by John LeggUpdated 12 Oct 2026
  • Does the J-Trace PRO Cortex Support Multi-Core Debugging?

    Yes. Multiple debuggers or debugger instances can use the same J-Trace PRO at the same time, so you can debug different cores on a multi-core target in parallel.

    You only need to set up the scan chain correctly for each debugger instance. No special multi-core settings are needed. This suits multi-core Cortex-A and Cortex-R processors. Whether trace is available, and on which cores, depends on the device's trace implementation.

    Answered by John LeggUpdated 12 Oct 2026

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.