Skip to product information
1 of 1

Total Phase, Inc

Total Phase PROMIRA SPI Analysis - Level 1 Application

Total Phase PROMIRA SPI Analysis - Level 1 Application

SKU: TP601510

Regular price
€150,95 EUR exc tax
Regular price Sale price
€150,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.

Information We Need for Your Order

We will send you the licence for this serial number.

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

THIS PRODUCT IS NOT AVAILABLE FOR DELIVERY TO THE USA

The Promira SPI Analysis Level 1 Application (TP601510) turns a Total Phase Promira Serial Platform into a non-intrusive SPI protocol analyser that monitors single-I/O SPI at up to 24 MHz at 3.3 V on one chip select. Captured data streams directly to the PC and is decoded in Data Center, so long captures are limited by disk space, not a buffer. It is the entry licence for debugging SPI traffic between a host and a real peripheral.

Non-Intrusive SPI Capture to 24 MHz

The analyser watches SCLK, MOSI, MISO and the chip select without driving them, so the target's timing is unchanged. At 24 MHz it covers most sensor, ADC, display and EEPROM buses on embedded boards, and matches the SPI capture ceiling of the Beagle I2C/SPI while adding Gigabit Ethernet control.

Decode Real Traffic in Data Center

Data Center decodes each transaction on MOSI and MISO as it is captured, which shows whether the host sent the command you think it did and what the peripheral returned. Streaming to the PC keeps long sessions intact, so a rare framing error or a corrupt read can be caught on the run where it happens.

Upgrade to 40 MHz When You Need It

If the bus later moves above 24 MHz, SPI Analysis Level 2 raises the ceiling to 40 MHz. Total Phase does not list Level 1 as a prerequisite for Level 2, so a 40 MHz requirement can be met with Level 2 alone.

Software

Captures are viewed in Total Phase Data Center, which decodes the bus in real time and saves sessions for later review. The analysis applications need Promira firmware v2.00 or later, which is installed through the Promira admin interface.

Specifications

Function SPI bus monitor (Analysis), non-intrusive
Maximum capture rate 24 MHz at 3.3 V
I/O mode Single I/O
Chip selects monitored 1
Capture Streamed directly to the PC
Software Data Center
Firmware Promira firmware v2.00 or later
Host platform Promira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet
Manufacturer part number TP601510

Limitations

  • This is a software licence only. It runs on the Promira Serial Platform (€1.306,95 ex VAT), which is sold separately and must be in place before the licence can be installed.
  • Single I/O and one chip select. Dual and quad SPI traffic is not decoded.
  • Monitor only. To drive the bus, add SPI Active Level 1.
  • We ask for your Promira serial number at checkout, as printed on the label of the unit, because we need it to process the licence.

Which I2C and SPI Analyser Should You Choose?

Beagle I2C/SPI Analyser Promira I2C Analysis Promira SPI Analysis Level 1 Promira SPI Analysis Level 2
I2C capture To 4 MHz To 5 MHz at 3.3 V No No
SPI capture To 24 MHz No To 24 MHz at 3.3 V, 1 chip select To 40 MHz, 1 chip select
Host connection USB 2.0 USB 2.0 or Gigabit Ethernet USB 2.0 or Gigabit Ethernet USB 2.0 or Gigabit Ethernet
Price ex VAT €502,95 €150,95 plus platform €150,95 plus platform €307,95 plus platform

For an SPI protocol analyser up to 24 MHz on a Promira you already own, Level 1 is the lowest-cost route. If the bus runs faster, go straight to Level 2.

Typical Applications

Checking the command sequence a host MCU sends to an SPI flash during boot. Capturing ADC sample reads at 20 MHz to find a dropped word. Logging a display controller's SPI traffic to trace a corrupted frame.

SPI Analysis Level 1 suits firmware engineers debugging SPI drivers and hardware engineers verifying peripheral integration.

Order the Promira SPI Analysis Level 1 Application from €150,95 ex VAT. For a formal quotation, request a quote from our team.

Frequently Asked Questions

Does this include the Promira hardware?

No. It is an application licence for a Promira Serial Platform you already own or order with it. The Promira Serial Platform is €1.306,95 ex VAT.

Can the analysis application drive the bus?

No. Analysis applications only monitor. To act as a master or slave, add the matching Active application to the same Promira.

Does it capture dual or quad SPI?

No. Total Phase specifies single I/O SPI on one chip select for both SPI Analysis levels.

What do I need to give you when I order?

Your Promira serial number, as printed on the unit's label. We need it to process the licence.

Last reviewed 5 October 2026.

Sources (4 Total Phase pages)
Ordering information
Part number (SKU)TP601510
ManufacturerTotal Phase, Inc
EAN5055383687770
Warranty12 months
  • 1 × Total Phase PROMIRA SPI Analysis - Level 1 Application

Contact us to confirm the full contents of the box.

Total Phase PROMIRA SPI Analysis - Level 1 Application compared with Total Phase PROMIRA SPI Analysis - Level 2 Application , Total Phase Beagle I2C/SPI Analyser and Total Phase PROMIRA I2C Analysis Application on 7 specifications.

Specifications of Total Phase PROMIRA SPI Analysis - Level 1 Application compared with Total Phase PROMIRA SPI Analysis - Level 2 Application , Total Phase Beagle I2C/SPI Analyser and Total Phase PROMIRA I2C Analysis Application
SpecificationThis product Total Phase PROMIRA SPI Analysis - Level 1 ApplicationTP601510Available to order Total Phase PROMIRA SPI Analysis - Level 2 ApplicationTP601610Available to order Total Phase Beagle I2C/SPI AnalyserTP320121In stock Total Phase PROMIRA I2C Analysis ApplicationTP601110Available to order
I2C capture Not supportedNot supportedUp to 4 MHzUp to 5 MHz
SPI capture Up to 24 MHzUp to 40 MHzUp to 24 MHzNot supported
SPI capture I/O width Single I/OSingle I/ONot listedNot supported
MDIO capture Not listedNot listedUp to 2.5 MHz (Clause 22 and 45)Not listed
Voltage level shifting Built-inBuilt-inAccessory boardBuilt-in
Hardware needed Licence for Promira Serial Platform (TP500110)Licence for Promira Serial Platform (TP500110)Standalone analyserLicence for Promira Serial Platform (TP500110)
PC interface High-Speed USBHigh-Speed USBHigh-Speed USBHigh-Speed USB
Price€150,95 €307,95 €502,95 €150,95

Windows

  • Total Phase Promira Software API for WindowsTotal Phase Promira Software API v1.60 for Windows, as published by Total Phase.ZIP404 KB · v1.60 · Nov 2026 · Windows
    Details

macOS

  • Total Phase Promira Software API for macOSTotal Phase Promira Software API v1.60 for macOS, as published by Total Phase.ZIP197 KB · v1.60 · Nov 2026 · macOS
    Details

Linux

  • Total Phase Promira Software API for LinuxTotal Phase Promira Software API v1.60 for Linux, as published by Total Phase.ZIP221 KB · v1.60 · Nov 2026 · Linux
    Details
Engineer Q&A

Questions and Answers

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.