
Key Features
Overview
The 50-Mil 10-Pin Patch Adapter adapts the standard 20-pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector, and allows custom connections and wiring between the 20-pin and 10-pin sides. SEGGER notes that the 10-pin 0.05" connector also appears on many non-Cortex-M designs with a non-standard pinout. The patch connection is how a J-Link reaches those boards.
Why Engineers Choose the SEGGER 0.1" To 50-mil 10-Pin Patch Adapter
Space Optimisation
Legacy Support
Cost Efficiency
The SEGGER 50-Mil 10-Pin Patch Adapter (part number 8.06.28) adapts the standard 20-pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector, and allows custom connections and wiring between the 20-pin and 10-pin sides. SEGGER notes that the 10-pin 0.05" connector also appears on many non-Cortex-M designs with a non-standard pinout; the patch connection is how a J-Link reaches those boards. It suits bring-up of custom or legacy hardware whose debug header does not follow the ARM assignment.
Custom Wiring Between the 20-Pin and 10-Pin Sides
A fixed adapter only works when the target follows the standard pinout. The Patch Adapter lets you route each signal from the J-Link side to whichever pin the target uses on its 10-pin 0.05" header, so a board with an in-house or vendor-specific assignment can still be debugged without a custom cable. The probe side is the standard J-Link 20-pin 0.1" connector found on most J-Link models. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.
Suitable J-Link and Flasher Models
SEGGER lists the Patch Adapter as suitable for Flasher ARM, and for J-Link Pro PoE, J-Link Pro, J-Link WiFi, J-Link PLUS Compact and J-Link BASE Compact.
Specifications
| Probe side | J-Link 20-pin, 0.1" |
|---|---|
| Target side | 10-pin, 0.05" Cortex-M connector |
| Wiring | Custom connections between the 20-pin and 10-pin sides |
| Suitable probes | Flasher ARM; J-Link Pro PoE, Pro, WiFi, PLUS Compact, BASE Compact |
| Part number | 8.06.28 |
What's Included
SEGGER publishes no box list for this adapter; the order is for the 50-Mil 10-Pin Patch Adapter itself.
Limitations
- SEGGER publishes no pinout, wiring scheme or mechanical drawing for the patch field; plan the routing from your target's documentation.
- For a target that follows the ARM 9-pin Cortex-M assignment, the fixed 9-Pin Cortex-M Adapter needs no wiring.
- SEGGER's suitable-products list for this adapter does not include J-Link Ultra or the Classic models, and names Flasher ARM as the only Flasher.
50-Mil 10-Pin Patch Adapter Compared with Related Adapters
| Adapter | Target connection | Pin mapping | Price ex VAT |
|---|---|---|---|
| 50-Mil 10-Pin Patch Adapter (this product) | 10-pin, 0.05" header | Custom wiring | €82,95 |
| 9-Pin Cortex-M Adapter | 9-pin, 0.05" Samtec FTSH | Fixed, ARM Cortex-M | €43,95 |
| Flying Wire Adapter | 10-pin row for flying wires | Wire to any target point | €118,95 |
| Measurement Patch Adapter | Colour-coded jumper wires and test points | Custom wiring, signal checks | €162,95 |
Order the 50-Mil 10-Pin Patch Adapter for €82,95 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Probe side | J-Link 20-pin, 0.1" |
| Wiring | Custom connections between the 20-pin and 10-pin sides |
| Suitable probes | Flasher ARM; J-Link Pro PoE, Pro, WiFi, PLUS Compact, BASE Compact |
| Part number | 8.06.28 |
| Host and Target Interface | |
| Target side | 10-pin, 0.05" Cortex-M connector |
| Ordering information | |
| Part number (SKU) | 8.06.28 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614400 |
| Warranty | 12 months |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER 0.1" To 50-mil 10-Pin Patch Adapter
Contact us to confirm the full contents of the box.
Questions and Answers
-
Patch Adapter or 9-Pin Cortex-M Adapter?
If the target follows the ARM Cortex-M pinout, the 9-Pin Cortex-M Adapter is the simpler fit. Choose the Patch Adapter when the 10-pin 0.05" header uses a non-standard pinout and you need to route signals yourself.
-
Which Probes Does SEGGER List for It?
Flasher ARM, J-Link Pro PoE, J-Link Pro, J-Link WiFi, J-Link PLUS Compact and J-Link BASE Compact.
-
What's the Maximum Cable Length I Can Use with This Adapter?
SEGGER does not publish a maximum cable length for this adapter. As general guidance, keep the cable between the adapter and the target as short as practical for reliable high-speed debugging.
-
Can This Adapter Handle 3.3V and 5V Target Voltages?
The adapter is passive and voltage-transparent, so it works with any target voltage your debug probe supports. Check your probe's VTref range for 1.8V or 5V targets. Most modern applications use 3.3V.
-
Does This Work with Automotive-Grade Debugging Applications?
Yes. It is a passive adapter, so it can be used on automotive targets in the same way as any other target.
-
What Connectors Are Compatible on the Target Side?
The 10-pin side uses standard 0.05" (1.27mm) pitch connectors. Compatible target connectors include Samtec FTSH series and equivalent 2x5 0.05" shrouded headers.
-
How Does This Compare to Tag-Connect Solutions for Space-Saving?
Tag-Connect footprints use spring pins and do not need a fitted connector. This adapter is used with standard 0.05" connectors on the target, which suits boards that already carry a debug header.
-
What's the Difference Between This Adapter and SEGGER's Other Cortex-M Adapters?
This patch adapter allows custom connections and wiring: it has two labelled pin-header rows that you patch with your own wire links. Standard adapters such as the 9-Pin and 19-Pin Cortex-M adapters have fixed pinouts. The patch adapter works with both standard Cortex-M and non-standard designs.
-
Can I Use This Adapter with Non-SEGGER Debug Probes?
SEGGER lists J-Link models as suitable products and also carries the adapter in its Flasher adapter range. The 20-pin side follows the standard ARM 20-pin layout, so check a third-party probe's pinout against it before connecting.
-
What's Included in the Package?
SEGGER lists the adapter board only. The two labelled header rows are patched with your own wire links, and a 10-pin 0.05" cable to the target is needed.
-
How Do I Wire Custom Pinouts with This Adapter?
Use your own wire links between the two labelled header rows to match your target's pinout. The adapter has clearly marked connection points on both the 20-pin and 10-pin sides.
-
Is This Compatible with SWD (Serial Wire Debug) Interface?
Yes, the adapter supports both JTAG and SWD with compatible debug probes. SWD needs only 4 connections: VCC, GND, SWCLK and SWDIO.
No questions match your search.