
Overview
The Measurement+Patch Adapter plugs between a J-Link or Flasher and the target on standard 20-pin 0.1" headers, with test points on the debug signals and a patch field for custom wiring. It connects targets that have no compatible standard debug connector, and gives scope access to the probe connection for signal integrity checks. Colour-coded jumper wires keep each signal easy to identify.
The SEGGER Measurement+Patch Adapter (part number 8.06.13) plugs between a J-Link or Flasher and the target on standard 20-pin 0.1" headers, with test points on the debug signals and a patch field for custom wiring. It connects targets that have no compatible standard debug connector, and gives scope access to the probe connection for signal integrity checks. Colour-coded jumper wires keep each signal easy to identify.
Custom Wiring for Targets Without a Standard Debug Connector
When no existing SEGGER adapter fits the target, the patch field lets you route each debug signal by hand. SEGGER's schematic shows VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET and VSUPPLY brought through the adapter. On the probe side it takes the standard J-Link 20-pin 0.1" connector found on most J-Link models; pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.
Test Points for Signal Integrity Checks
Test points on the debug signals let you put a scope probe on the lines between programmer and target without disturbing the wiring. SEGGER's Knowledge Base article on signal integrity shows an SWD example with overshoot and ringing on SWCLK, measured with an active scope probe; it notes that inserting a Measurement+Patch adapter changed the signal enough for the connection to work.
SEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.
Specifications
| Part number | 8.06.13 |
|---|---|
| Connection | Inline, standard 20-pin 0.1" headers on both sides |
| Functions | Signal test points, patch field for custom wiring |
| Signals on schematic | VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, VSUPPLY |
| Wiring | Colour-coded jumper wires |
| Suitable J-Link models | Pro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact) |
| Suitable Flasher models | Pro, Pro XL, Compact, Portable PLUS |
What's Included
- 1 x Measurement+Patch Adapter
- Jumper wires for manual setup
Limitations
- The adapter is made to give access to the signals, not to damp them. To reduce overshoot and ringing, SEGGER's Knowledge Base points to the Signal Smoothing Adapter.
- SEGGER publishes no pinout table for the patch field on the product page; the schematic is the reference.
- No J-Link EDU models are on SEGGER's suitable products list.
Measurement+Patch Adapter Compared with Related Adapters
| Adapter | What it does | Price ex VAT |
|---|---|---|
| Measurement+Patch Adapter (this product) | Inline 20-pin adapter with test points and a patch field | €162,95 |
| Flying Wire Adapter | Converts the 20-pin connector to a 10-pin row for wiring to prototype boards | €118,95 |
| 50-Mil 10-Pin Patch Adapter | Custom wiring between the 20-pin connector and a 10-pin 0.05" Cortex-M style connector | €82,95 |
| Signal Smoothing Adapter | Adjustable series resistors to damp JTAG overshoot and ringing | €75,95 |
Order the Measurement+Patch Adapter for €162,95 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.13 |
| Connection | Inline, standard 20-pin 0.1" headers on both sides |
| Functions | Signal test points, patch field for custom wiring |
| Wiring | Colour-coded jumper wires |
| Suitable J-Link models | Pro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact) |
| Suitable Flasher models | Pro, Pro XL, Compact, Portable PLUS |
| Host and Target Interface | |
| Signals on schematic | VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, VSUPPLY |
| Ordering information | |
| Part number (SKU) | 8.06.13 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614615 |
| Warranty | 12 months |
| Shipping weight | 0.02 kg |
- 1 ×Measurement+Patch Adapter
- 10 ×Jumper wires for manual setup
The manufacturer lists the main items only.
Questions and Answers
-
When Do I Need the Measurement+Patch Adapter?
When the target has no debug connector that an existing SEGGER adapter fits, or when you need to measure the debug signals at the probe connection. The patch field handles the first case and the test points the second.
-
Does It Work with Flasher as Well as J-Link?
Yes. SEGGER lists Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS alongside the J-Link Pro PoE, Pro, Ultra, WiFi, PLUS and BASE models.
-
Will It Fix Signal Integrity Problems?
It is not designed to fix them; it lets you see them. Its own wiring can change the signal, as SEGGER's article notes. For damping overshoot and ringing, SEGGER's signal integrity article recommends the Signal Smoothing Adapter.
No questions match your search.