

Key Features
Overview
The Tag-Connect TC-XILINX6-M simplifies connecting Xilinx 14-pin 2mm programmer cables (like Digilent JTAG-HS2/HS3) to a minimal 6-pin footprint using the TC2030-IDC interface. Its primary role is for FPGA and CPLD in-system programming or debugging during design, prototype, or low-volume production. The adapter enables fast switching between boards without repeated cable insertions and minimises physical PCB footprint. It is part of the broader Tag-Connect line of programming accessories, alongside similar solutions such as the TC2050-XILINX-M (for 10-pin cables) and TC-XILINX6 (male version for USB II cables). See all related adapters at the Tag-Connect DSP/FPGA/CPLD Adapters catalogue or browse the complete Tag-Connect collection for alternative options.
Der TC-XILINX6-M ist ein Adapter, der in einen 2-mm-14-poligen Buchsenstecker gesteckt werden kann, der auf Programmierkabeln für Xilinx wie Digilent JTAG-HS2 und Digilent JTAG-HS3 zu finden ist. Zur Verwendung mit TC2030-IDC Plug-of-Nails™-Kabeln.
General Information | |
---|---|
Part Number (SKU) |
TC-XILINX6-M
|
Manufacturer |
|
Physical and Mechanical | |
Weight |
0.1 kg
|
Other | |
Warranty |
|
HS Code Customs Tariff code
|
|
EAN |
5055383665136
|
Frequently Asked Questions
Have a Question?
-
Does it need any drivers or software?
No drivers are required; it’s purely a passive hardware adapter.
-
Is it compatible with non-Tag-Connect programming cables?
Its output is 6-pin 0.1” and suits only TC2030-IDC compatible harnesses.
-
How is pinout mapped from Xilinx to Tag-Connect?
The adapter follows standard JTAG signal mapping; label references and tables are included in the section above.
-
Can this be used for production programming?
Yes, it suits both prototyping and low-to-medium volume production.
-
Will this adapter fit the Xilinx Platform Cable USB II DLC10?
No, the Platform Cable USB II DLC10 needs the male-header TC-XILINX6 adapter instead.
-
Is a Tag-Connect cable included?
No, only the adapter is supplied. Cables must be purchased separately.
-
Can the TC-XILINX6-M be used with “No Legs” Tag-Connect cables?
Yes, it works with both TC2030-IDC (with legs) and TC2030-IDC-NL (no legs) cables.
-
Which programming cables is this adapter compatible with?
It works with digilent JTAG-HS2, JTAG-HS3, and other Xilinx-compatible cables using a female 14-pin header.
-
What does the TC-XILINX6-M adapter do?
It converts a standard Xilinx 2mm 14-pin JTAG connector to a compact 6-pin 0.1” TC2030-IDC interface for easy board access.