
Overview
The Test Farm Power Adapter lets target power supplied through a USB connector be switched on and off remotely with J-Link software, while the debug signals stay connected. It sits between the J-Link and the debug cable on 20-pin 0.1" connectors and powers the target from a USB-A port at 5V and around 250mA from the J-Link. SEGGER pairs it with Ethernet-capable probes such as the J-Link PRO.
The SEGGER Test Farm Power Adapter (part number 8.06.36) lets target power supplied through a USB connector be switched on and off remotely with J-Link software, while the debug signals stay connected. It sits between the J-Link and the debug cable on 20-pin 0.1" connectors and powers the target from a USB-A port: 5V at around 250mA from the J-Link, or 1A and more from an external USB supply on its Micro USB input. SEGGER pairs it with Ethernet-capable probes such as the J-Link PRO for building test farms.
Remote Power Cycling for Board Farms and CI
In a test farm, evaluation boards, prototypes, production boards or finished products are connected to the network through debug probes, so testers and developers can reach them remotely. The adapter adds power control to each node: a target can be switched off to save energy, or power-cycled for an automated reboot. SEGGER names regression testing, continuous integration and compiler tests, and compatibility testing of wireless protocols such as Wi-Fi, Zigbee and Matter across several identical or mixed targets. SEGGER's Knowledge Base Test Farm example uses J-Link PRO PoE probes on the LAN.
Two Power Sources, One USB-A Output
All debug signals pass through 1:1 except pin 19, which carries the target supply. Target power leaves the adapter on a power-only USB 2.0 Type-A host connector. Powered from the J-Link, the output is boosted to 5V and limited to around 250mA. With an external source such as a USB hub or wall adapter on the Micro USB connector, 1A and more is possible. The probe side uses the standard J-Link 20-pin 0.1" connector found on most J-Link models; see our SEGGER J-Link 20-pin connector pinout guide.
What's Included
SEGGER publishes no box list for this adapter. The order is for the Test Farm Power Adapter itself.
Specifications
| Probe-side connector | 20-pin 0.1" socket |
|---|---|
| Target-side connector | 20-pin 0.1" header |
| Signal routing | 1:1 for all debug signals except pin 19 (target supply) |
| Target power output | USB 2.0 Type-A host connector, power only |
| Output when powered by J-Link | 5V (boosted), limited to around 250mA |
| Output with external supply | 1A and more |
| External supply input | Micro USB, from a USB hub or wall adapter |
| Power control | Remote on/off using J-Link software |
Limitations
- Powered from the J-Link alone, the output is limited to around 250mA; targets that need more require an external USB supply on the Micro USB input.
- The switched supply reaches the target through the USB-A connector, so the target must take its power from USB.
- The debug signals stay connected while power is off. To disconnect the programmer's signals from the target fully, SEGGER offers the Relay Adapter.
Test Farm Power Adapter Compared with Related SEGGER Adapters
| Adapter | Function | Target power | Price ex VAT |
|---|---|---|---|
| Test Farm Power Adapter (this product) | Remote on/off of target power over USB | 5V, around 250mA from J-Link; 1A and more with an external supply | £110 |
| Relay Adapter | Relay contacts fully disconnect Flasher signals from the target, for automated test setups | Not a supply adapter | £240 |
| Target Supply Adapter | Adjustable target supply, debug signals 1:1 | 0.8V to 3.6V, up to 400mA | £84 |
| 5V Target Supply Adapter | Fixed target supply, debug signals 1:1 | 5V ±5% | £130 |
Order the Test Farm Power Adapter for £110 ex VAT. Pair it with a networked probe such as the J-Link PRO, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| Host and Target Interface | |
|---|---|
| Probe-side connector | 20-pin 0.1" socket |
| Target-side connector | 20-pin 0.1" header |
| Signal routing | 1:1 for all debug signals except pin 19 (target supply) |
| Power | |
| Target power output | USB 2.0 Type-A host connector, power only |
| Output when powered by J-Link | 5V (boosted), limited to around 250mA |
| Output with external supply | 1A and more |
| External supply input | Micro USB, from a USB hub or wall adapter |
| Power control | Remote on/off using J-Link software |
| Ordering information | |
| Part number (SKU) | 8.06.36 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383619511 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER Test Farm Netzteil
Contact us to confirm the full contents of the box.
Questions and Answers
-
Which Debug Probe Should I Use with the Test Farm Power Adapter?
An Ethernet-capable J-Link. SEGGER names the J-Link PRO for building test farms, and its Knowledge Base test farm example uses J-Link PRO PoE probes on the LAN.
-
How Much Current Can It Deliver to the Target?
Around 250mA at 5V when powered from the J-Link. With an external USB supply on the Micro USB connector, SEGGER states that 1A and more is possible.
No questions match your search.