Zu Produktinformationen springen
1 von 2

SEGGER Microcontroller GmbH

SEGGER TI-CTI-20 Adapter

SEGGER TI-CTI-20 Adapter

Passt den standardmäßigen 20-poligen 0,1-Zoll-J-Link-Zielanschluss an den TI CTI-20-Anschluss an.

SKU: 8.06.06

Normaler Preis
£78.00 exc VAT
£93.60 inc VAT
Normaler Preis Verkaufspreis
£78.00 exc VAT
£93.60 inc VAT
Sale Ausverkauft
Versand wird beim Checkout berechnet
If no stock is shown above, order now and we'll dispatch within 5 working days.

Zahlungsmethoden

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Banküberweisung
Vollständige Details anzeigen

Overview

The TI-CTI-20 Adapter adapts the standard J-Link 20-pin 0.1" connector to the TI CTI-20 connector, so a J-Link or Flasher can connect to Texas Instruments evaluation boards with a CTI-20 header, such as the AM335x evaluation module. A key on pin 6 stops the adapter being fitted the wrong way round.

The SEGGER TI-CTI-20 Adapter (part number 8.06.06) adapts the standard J-Link 20-pin 0.1" connector to the TI CTI-20 connector, so a J-Link or Flasher can connect to Texas Instruments evaluation boards with a CTI-20 header, such as the AM335x evaluation module. A key on pin 6 stops the adapter being fitted the wrong way round. It suits JTAG debug and flash programming on TI evaluation hardware with a SEGGER probe already on the bench.

J-Link and Flasher Access to TI CTI-20 Headers

The probe side plugs into the standard J-Link 20-pin 0.1" connector found on most J-Link models, and into the same 20-pin connector on Flasher. The target side presents the TI CTI-20 connector. SEGGER's schematic carries VTREF, TRST, TDI, TMS, TCK, RTCK, TDO and nSRST to the target, with EMU0 and EMU1 tied to GND. Probe-side pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.

Listed for the TI AM335x Evaluation Module

SEGGER names the AM335x evaluation module as an example target. Its Knowledge Base page for the TI AM3359 states that the debug probe can be connected using the TI CTI-20 adapter, and lists the TMDXEVM3358 as tested hardware.

Compatible SEGGER Probes and Programmers

SEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.

Specifications

Part number 8.06.06
Probe side J-Link/Flasher 20-pin, 0.1" (2.54mm)
Target side TI CTI-20 connector
Keying Key on pin 6
Target signals (SEGGER schematic) VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, nSRST; EMU0 and EMU1 tied to GND
Example target TI AM335x evaluation module (TMDXEVM3358 listed as tested)
Compatible Flasher models Flasher PRO, PRO XL, Compact, ARM, Portable PLUS, Secure
Compatible J-Link models J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact

What's Included

SEGGER publishes no box contents list for this adapter, so we state only the TI-CTI-20 Adapter itself.

Limitations

  • SEGGER's schematic shows the JTAG signal set only; SEGGER lists no SWD or trace connection for this adapter.
  • SEGGER publishes no dimensions and lists no cable for it.
  • For TI targets with a 14-pin 0.1" JTAG header, use the 14-Pin TI Adapter. For Jacinto 7 boards with a MIPI-60 header, use the MIPI-60 Adapter.

TI-CTI-20 Adapter Compared with Related Adapters

Adapter Target connector Signals Cable listed by SEGGER Price ex VAT
TI-CTI-20 Adapter (this product) TI CTI-20 JTAG None listed £78
14-Pin TI Adapter TI 14-pin, 0.1" JTAG 0.1" 14-pin ribbon cable (18cm) £62
MIPI-60 Adapter MIPI-60 (TI Jacinto 7) JTAG/SWD, up to 4-bit trace None listed £130

Order the TI-CTI-20 Adapter for £78 ex VAT. Check your board's CTI-20 header against SEGGER's schematic, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Part number8.06.06
Probe sideJ-Link/Flasher 20-pin, 0.1" (2.54mm)
KeyingKey on pin 6
Host and Target Interface
Target sideTI CTI-20 connector
Target signals (SEGGER schematic)VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, nSRST; EMU0 and EMU1 tied to GND
Example targetTI AM335x evaluation module (TMDXEVM3358 listed as tested)
Software and Compatibility
Compatible Flasher modelsFlasher PRO, PRO XL, Compact, ARM, Portable PLUS, Secure
Compatible J-Link modelsJ-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact
Ordering information
Part number (SKU)8.06.06
ManufacturerSEGGER Microcontroller GmbH
EAN5055383615346
Warranty12 Monate
Shipping weight0.02 kg
  • 1 × SEGGER TI-CTI-20 Adapter

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

3 questions
  • Can the Adapter Be Connected the Wrong Way Round?

    No. SEGGER keys the adapter on pin 6, so it fits a CTI-20 header in one orientation only.

    Answered by John LeggUpdated 16 Nov 2026
  • Which TI Boards Use the CTI-20 Connector?

    SEGGER names the AM335x evaluation module, and its Knowledge Base lists the TMDXEVM3358 as tested hardware for the AM3359. For other boards, check the board documentation for a CTI-20 header.

    Answered by John LeggUpdated 16 Nov 2026

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.