
Overview
The RX Adapter maps the standard J-Link 20-pin 0.1" connector to the standard 14-pin 0.1" Renesas connector, for J-Link or Flasher connections to Renesas RX600, RX200 and RX100 series MCUs over JTAG or FINE. A jumper can power the target at 3.3V or 5V through VTref on pin 8, and the default setting is off.
The SEGGER RX Adapter (part number 8.06.01) maps the standard J-Link 20-pin 0.1" connector to the standard 14-pin 0.1" Renesas connector, for J-Link or Flasher connections to Renesas RX600, RX200 and RX100 series MCUs over JTAG or FINE. A jumper can power the target at 3.3V or 5V.
JTAG and FINE Connections to Renesas RX MCUs
SEGGER lists JTAG for RX610, RX621, RX62G, RX62N, RX62T, RX630, RX631, RX63N, RX63T, RX64M, RX65N, RX660, RX66T, RX71M and RX72N, and FINE for RX111, RX13T, RX140, RX210, RX21A and RX220. In FINE mode the FINED line is open drain. On revisions covered by SEGGER's product page it needs a pull-up on the target (1k Ohm recommended); SEGGER's Knowledge Base says Rev9 has a 3.3k pull-up on the adapter, so no target pull-up is needed. Probe-side pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.
Optional 3.3V or 5V Target Supply
The adapter can power the target hardware, with 3.3V or 5V selected by a jumper. With the supply option jumpered, the target is powered through VTref (pin 8 of the 14-pin connector). It ships set to "do not power target", with the jumper open.
SEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher Portable PLUS and Flasher Secure.
Specifications
| Part number | 8.06.01 |
|---|---|
| Probe side | J-Link 20-pin, 0.1" (2.54mm) |
| Target side | Renesas standard 14-pin, 0.1" |
| Target interfaces | JTAG, FINE |
| Target series | Renesas RX600, RX200, RX100 |
| JTAG pinout (14-pin) | 1 TCK, 3 nTRST, 4 EMLE, 5 TDO, 7 MD0, 9 TMS, 10 UB, 11 TDI, 13 nRES |
| FINE pinout (14-pin) | 1 FINEC, 4 not connected (Rev9: GND), 7 FINED, 10 UB, 13 nRES |
| FINED pull-up | Older revisions: 1k Ohm on target recommended; Rev9: 3.3k on adapter |
| Target supply | 3.3V or 5V via jumper, through VTref (pin 8); default off |
What's Included
- 1 x RX Adapter
Limitations
- SEGGER's product page says the RX FINE Adapter is required for FINE on RX63x or RX72N; its Knowledge Base says RX Adapter Rev9 replaces the RX FINE Adapter. Ask us which revision ships.
- SEGGER notes that adapter revisions older than 5 may lack FINE support; the revision, or on older units a production date, is printed on the back.
- No J-Link EDU models are on SEGGER's suitable products list.
RX Adapter Compared with Related Adapters
| Adapter | Target | Interfaces | Price ex VAT |
|---|---|---|---|
| RX Adapter (this product) | Renesas RX600, RX200, RX100 | JTAG, FINE; optional 3.3V or 5V target supply | £130 |
| RX FINE Adapter | Renesas RX | FINE, with 3k3 pull-up on FINED | £64 |
| RL78 14-Pin Programming Adapter | Renesas RL78 | See product page | £60 |
| Renesas M16C Family 10-Pin Adapter | Renesas M16C | See product page | £60 |
Order the RX Adapter for £130 ex VAT. Check your RX part against SEGGER's JTAG and FINE lists above, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.01 |
| Probe side | J-Link 20-pin, 0.1" (2.54mm) |
| FINED pull-up | Older revisions: 1k Ohm on target recommended; Rev9: 3.3k on adapter |
| Host and Target Interface | |
| Target side | Renesas standard 14-pin, 0.1" |
| Target interfaces | JTAG, FINE |
| Target series | Renesas RX600, RX200, RX100 |
| JTAG pinout (14-pin) | 1 TCK, 3 nTRST, 4 EMLE, 5 TDO, 7 MD0, 9 TMS, 10 UB, 11 TDI, 13 nRES |
| FINE pinout (14-pin) | 1 FINEC, 4 not connected (Rev9: GND), 7 FINED, 10 UB, 13 nRES |
| Power | |
| Target supply | 3.3V or 5V via jumper, through VTref (pin 8); default off |
| Ordering information | |
| Part number (SKU) | 8.06.01 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614684 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
- 1 ×RX Adapter
- 1 ×0.1" 14-pin cable
Questions and Answers
-
Do I Need the RX Adapter or the RX FINE Adapter?
The RX Adapter covers JTAG on the parts SEGGER lists, from RX610 to RX72N, and FINE on the RX111, RX13T, RX140, RX210, RX21A and RX220. For FINE on RX63x or RX72N, SEGGER's product page says the RX FINE Adapter is required, while its Knowledge Base says RX Adapter Rev9 replaces the RX FINE Adapter. Ask us which revision ships.
-
Can the RX Adapter Power My Target?
Yes. A jumper selects 3.3V or 5V, supplied to the target through VTref on pin 8. It ships with the jumper open, so the target is not powered by default.
-
Does FINE Need Anything on the Target Board?
FINED is open drain. On revisions covered by SEGGER's product page, FINED needs a pull-up on the target (1k Ohm recommended). SEGGER's Knowledge Base says Rev9 has a 3.3k pull-up on the adapter, so no target pull-up is needed.
No questions match your search.