Mikroelektronika d.o.o.
DAC 10 Click-Platine
DAC 10 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
- Niedriger Stromverbrauch, intelligenter DAC mit Spannungsausgang, benutzerprogrammierbarer nichtflüchtiger Speicher, I2C-kompatible Schnittstelle, programmierbare Wellenformgenerierung, PWM-Ausgang mit Dreieckwellenform und VFB-Anschluss und mehr
- Basierend auf dem DAC53401 – einem intelligenten Digital-Analog-Wandler mit 10-Bit-Spannungsausgang von Texas Instruments
- Kann für Anwendungen wie LED- und allgemeine Arbeitspunkterzeugung, Stromversorgungssteuerung, programmierbare Referenz und mehr verwendet werden
- mikroBUS: I2C-Schnittstelle
Das DAC 10 Click Board™ ist eine kompakte Zusatzplatine, die einen voll ausgestatteten, hochpräzisen Digital-Analog-Wandler enthält. Diese Platine verfügt über den DAC53401, einen intelligenten Digital-Analog-Wandler mit 10-Bit-Spannungsausgang von Texas Instruments. Dieses Gerät verbraucht extrem wenig Strom und verfügt über einen nichtflüchtigen Speicher (NVM), eine interne Referenz und eine serielle I2C-Schnittstelle mit einer konfigurierbaren Slave-Adresse. Es arbeitet entweder mit einer internen Referenz oder der Stromversorgung als Referenz und bietet eine Vollaussteuerung von 1,8 V bis 5,5 V.
Der DAC10 Click Board™ ist eine kompakte Zusatzplatine, die einen Hochleistungsdatenkonverter enthält, der eine ausgezeichnete Wahl für Anwendungen wie LED- und allgemeine Arbeitspunkterzeugung, Stromversorgungssteuerung, programmierbare Referenz und mehr darstellt.
How Does The DAC 10 Click Board™ work?
The DAC 10 Click Board™ as its foundation uses the DAC53401, a 10-bit voltage-output smart digital-to-analog converter from Texas Instruments. This device consumes extremely low power and has a non-volatile memory (NVM), an internal reference, and an I2C serial interface. It also has a power-on-reset circuit that makes sure all the registers start with default or user-programmed settings using NVM. It operates with either an internal reference or the power supply as a reference and provides full-scale output from 0V to 5.5V.
The DAC53401 includes digital slew rate control and supports basic signal generation such as square, ramp, and sawtooth waveforms. It also can generate pulse-width modulation (PWM) output with the combination of the triangular or sawtooth waveform and the VFB terminal. The DAC53401 is also called a smart DAC device because of its advanced integrated features. The force-sense output, PWM output, and NVM capabilities of this smart DAC enable system performance and control without using the software. These features allow DAC53401 to go beyond a conventional DAC's limitations that depend on a processor to function.
The DAC 10 Click Board™ communicates with MCU using the standard I2C 2-Wire interface to read data and configure settings, supporting Standard Mode operation with a clock frequency up to 100kHz, Fast Mode up to 400kHz, and Fast Mode Plus up to 1MHz. Besides, it also allows the choice of the three least significant bits of its I2C slave address by positioning the SMD jumper labeled as ADDR SEL to an appropriate position marked as 0, 1, SCL, and SDA, providing the user with a choice of 4 I2C Slave addresses.
The DAC 10 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the I2C communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | DAC |
| Applications | Can be used for applications such as LED and general-purpose bias point generation, power supply control, programmable reference, and more |
| On-board modules | DAC53401 - 10-bit voltage-output smart digital-to-analog converter from Texas Instruments |
| Key Features | Low power consumption, voltage-output smart DAC, user-programmable nonvolatile memory, I2C compatible interface, programmable waveform generation, PWM output using triangular waveform and VFB terminal, and more |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on DAC 10 Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2-JP3 | ADDR SEL | Left | I2C Address Selection 0/1/SCL/SDA: Left position 0, Right position 1, Upper position SCL, Lower position SDA |
DAC 10 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Output Voltage Range | 0 | - | 5.5 | V |
| Resolution | - | 10 | - | bits |
| Operating Temperature Range | -40 | +25 | +125 | °C |
Software Support
We provide a library for the DAC 10 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe Github account.
Library Description
This library contains API for the DAC 10 Click Board™ driver.
Key Functions
dac10_cfg_setup- Config Object Initialization function.dac10_init- Initialization function.
Example Description
This example demonstrates the use of the DAC 10 Click Board™.
The demo application is composed of two sections :
void application_task ( void )
{
float step = REFERENCE_VOLTAGE / NUMBER_OF_STEPS;
float output_voltage = step;
uint8_t cnt = 0;
while ( cnt < NUMBER_OF_STEPS )
{
dac10_set_output_voltage ( &dac10, REFERENCE_VOLTAGE, output_voltage );
log_printf( &logger, " DAC output voltage set to %.2f Vrn", output_voltage );
output_voltage += step;
cnt++;
Delay_ms( 2000 );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.DAC10
Additional Notes and Information
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The DAC 10 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
We provide a library for the DAC 10 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe Github account.
Library Description
This library contains API for the DAC 10 Click Board™ driver.
Key Functions
dac10_cfg_setup- Config Object Initialization function.dac10_init- Initialization function.
Example Description
This example demonstrates the use of the DAC 10 Click Board™.
The demo application is composed of two sections :
void application_task ( void )
{
float step = REFERENCE_VOLTAGE / NUMBER_OF_STEPS;
float output_voltage = step;
uint8_t cnt = 0;
while ( cnt < NUMBER_OF_STEPS )
{
dac10_set_output_voltage ( &dac10, REFERENCE_VOLTAGE, output_voltage );
log_printf( &logger, " DAC output voltage set to %.2f Vrn", output_voltage );
output_voltage += step;
cnt++;
Delay_ms( 2000 );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.DAC10
Additional Notes and Information
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The DAC 10 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
DAC 10 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.