Dediprog BBF-16W Backup-Boot-Flash-Modul-SO16W
Dediprog BBF-16W Backup-Boot-Flash-Modul-SO16W
Der Backup Boot Flash ist ein geniales Tool von DediProg, das den Anwendungscontroller dazu zwingt, automatisch mit dem Backup-SPI-Flash zu arbeiten, der in unseren Tool-Sockel SO16W eingesetzt ist, und nicht mehr mit dem Main Serial Flash, der an Bord gelötet ist. Beim Anschluss an Bord deaktiviert das BBF-Tool automatisch den Main Serial Flash, der nicht abgelötet werden muss.
The BBF tool can be connected to the application with:
- Our BBF cable (included) to the application 2X5 2.54mm pin header.
- Our BBF Test Clip-SO16W (to be purchased separately) to be connected on the Main Serial flash package soldered on board (no need of connector).
The Serial Flash can be easily changed manually thanks to the SO16W socket or even updated by connecting our SF100 programmer. The SF100 programmer is completely transparent for the application and will offer to developer high flexibility for code trials or update. The BBF is frequently used to boot failing computers and use the Flash Utility tools to update the corrupted Bios memory.
Please note that the BBF modules only support 3.3V/2.5V IC.
For offline programming demand only, it is recommended to use socket adaptor.
Features
- Compatible with most of the applications (no hardware modification needed)
- Disable automatically the two Main Serial Flash soldered on board (No need to unsolder it)
- Main Serial Flash can be enabled again with a switch on the BBF tool
- Backup Serial Flash can be easily updated by connecting the SF100 programmer
Application Hardware Requirements
Dediprog BBF-16W Backup-Boot-Flash-Modul-SO16W
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.