
Caractéristiques principales
Présentation
The ISP-600-CB1-G is a purpose-built interface cable that bridges Dediprog's SF600 series programmers to target boards with 2×6 2.54mm ISP headers. This flat ribbon cable maintains signal integrity during SPI flash programming operations, supporting both single and dual chip select configurations for versatile board designs.
The cable features robust construction with clearly marked pin 1 orientation via red stripe coding, ensuring correct connection every time. Its compact 2×6 connector format matches the industry-standard ISP header found on most development and production boards, making it an indispensable accessory for engineers working with SF600 programmers.
Regular replacement of this cable is recommended in high-frequency production environments to maintain optimal signal contact and programming reliability. The cable supports all standard SPI modes and voltage levels from 1.8V to 5V, accommodating the full range of modern SPI flash devices.
Téléchargements
Ce qui convainc les ingénieurs : Câble ISP Dediprog ISP-600-CB1-G SF600
Essential Accessory
Production Ready
Future Proof Design
Le câble ISP SF600 est utilisé pour connecter le programmateur ISP SF600 au connecteur ISP 2X6 broches 2,54 mm de la carte, offrant la possibilité de mettre à jour directement le contenu Flash SPI. En cas de connexions fréquentes, le câble ISP doit être changé de temps en temps pour assurer un bon contact avec les signaux de la carte d'application (canal de production ou de réparation). La méthode de mise à jour ISP ne doit être utilisée que si elle est prise en charge par votre application ou votre contrôleur.
Tableau 1 : Brochage du connecteur de câble ISP (2x6)
| 1 | Vpp | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Maintien/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | Terre | MOSI/DQ0 | 10 |
| 11 | Caroline du Nord | Réinitialiser | 12 |
| Informations de commande | |
|---|---|
| Référence (SKU) | ISP-600-CB1-G |
| Fabricant | Dediprog Technology Co., Ltd. |
| EAN | 5055383621897 |
| Garantie | 12 mois |
| Poids d'expédition | 0.05 kg |
-
1 ×
Câble ISP Dediprog ISP-600-CB1-G SF600
Contactez-nous pour confirmer le contenu complet du colis.
Questions et réponses
-
Can I Program Two SPI Devices with This Cable?
Yes. The cable carries two chip select lines (CS1 and CS2), and the SF software selects which of two serial flash devices on the target board to program.
-
What Voltage Levels Does the Cable Support?
The cable itself is passive; the programmer sets the target voltage, which you choose in Dediprog's software. The SF600 and SF600Plus supply 1.8V to 3.3V, and the SF600Plus-G2 supports from 1.2V (up to 5.5V per Dediprog's flyer).
-
How Often Should I Replace the Cable in Production Use?
Dediprog advises replacing it periodically if you connect it frequently, and whenever the connection is no longer reliable.
-
Is the Cable Suitable for Quad SPI Programming?
Yes. It supports single, dual and quad I/O through the DQ0 to DQ3 lines, where the programmer supports them. Octal I/O needs the 2x10 header on the SF600Plus-G2.
-
Can I Extend This Cable for Hard-to-Reach Connectors?
We don't recommend it. Dediprog advises keeping ISP cables as short as possible to protect signal integrity. For a 2x10 header on the SF600Plus or SF600Plus-G2, Dediprog offers the 12cm EM-SP-CB split cable.
-
Which SF600 Programmers Is This Cable Compatible With?
Dediprog includes the ISP-600-CB1-G with the SF600, SF600Plus and SF600Plus-G2.
-
What Is the Maximum Cable Length for Reliable Operation?
The supplied cable is about 7.5cm. Dediprog advises keeping ISP cables as short as possible (its SF100 note gives 8cm as the maximum); longer cables can cause communication failures, in which case lower the SPI clock.
-
How Do I Identify Pin 1?
Use the pinout table on Dediprog's product page: pin 1 is Vpp. Match pin 1 on the cable to pin 1 on the programmer and on your board's header.
-
Does the Cable Supply Power to the Target Board?
It can. The programmer supplies Vcc on pin 4, up to 100mA. Dediprog advises powering the flash from one source only, so don't supply it from the board and the programmer at the same time.
No questions match your search.