Dediprog Technology Co Ltd
Adaptateur Dediprog 2,54 mm 2x10 vers 1,27 mm 2x10
Adaptateur Dediprog 2,54 mm 2x10 vers 1,27 mm 2x10
SKU: ADP-SF600-254-TO-127xCB
Impossible de charger la disponibilité du service de retrait
Key Features
Overview
Dediprog ADP-SF600-254-TO-127-CB adapts the SF600/SF600Plus-G2 programmer’s 2×10 2.54 mm header to a compact 2×10 1.27 mm header for in-system programming (ISP). Supplied with an 8 cm 1.27 mm ribbon cable, it provides a direct, one-to-one mapping of SF600 signals (including CS1/CS2 and DQ0–DQ3) to targets that use a 1.27 mm footprint, reducing board space and simplifying fixture design.
The adapter is part of the Dediprog SF600 ecosystem and complements accessories such as the SF600Plus-G2 programmer, the SF600-ISO-Board-2 isolation board, and ISP adaptors like ISP-SPIxIIC. For SF100 users, see the compact ISP-UADP-127 universal adaptor. These options support engineering and production workflows across SPI NOR/NAND devices.
Why consider it? If your target PCB standardises on 1.27 mm 20-pin ISP headers, this adapter keeps your SF600-series hardware and cabling unchanged while matching the finer pitch on board—lowering risk, preserving signal integrity, and avoiding ad-hoc cabling.
Why Engineers Choose The Adaptateur Dediprog 2,54 mm 2x10 vers 1,27 mm 2x10
Drop-In For SF600 Pinout
Space-Saving Target Connection
Ecosystem & Documentation
L'adaptateur et le câble sont utilisés avec le programmateur Dediprog SF600 pour convertir un connecteur femelle 2x10 de 2,54 mm en un connecteur femelle 2x10 de 1,27 mm.
| General Information | |
|---|---|
Product Type |
Adaptateur de programmateur
|
Part Number (SKU) |
ADP-SF600-254-TO-127xCB
|
Manufacturer |
|
| Other | |
Warranty |
|
HS Code Customs Tariff code
|
|
EAN |
5055383621934
|
Frequently Asked Questions
Have a Question?
-
Is this a good fit for dense DUT layouts?
Yes, the 1.27 mm, 20-pin header reduces PCB footprint while retaining full signal access for robust ISP.
-
What if my project uses SF100?
For the SF100, consider the compact ISP-UADP-127 universal adaptor.
-
How does this differ from 20-to-10 ‘SWD’ adapters?
Those convert 20-pin to 10-pin (often for ARM SWD) and are not pin-compatible with SF600’s 20-to-20 mapping. This adapter preserves all SF600 lines on a 20-pin 1.27 mm header.
-
Is there isolation to improve boot behaviour on motherboards?
Isolation isn’t part of this adapter. If attachment affects DUT boot, use the SF600-ISO-Board-2.
-
Can I use it for both SPI NOR and SPI NAND targets?
Yes; the adapter carries the SF600 series signals used by Dediprog’s SPI NOR/NAND workflows. Functionality depends on the programmer and target device support.
-
Is a 1.27 mm cable included?
Yes—an 8 cm 1.27 mm dual-row ribbon cable with keyed female header is included.
-
Does it change the SF600 pinout?
No, signals are passed straight through to a 2×10 1.27 mm header (CS1/CS2, DQ0–DQ3, etc.).
-
What programmers is this adapter for?
It’s designed for Dediprog SF600 series, including the SF600Plus-G2. See the programmer on Debug Store.