Skip to product information
1 of 1

SEGGER Microcontroller GmbH

SEGGER USB Isolator Adapter

SEGGER USB Isolator Adapter

J-Link USB connector to provide host side electrical isolation.

SKU: 8.07.02

Regular price
€231,95 EUR exc tax
Regular price Sale price
€231,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Key Features

Basic isolation (3 kV DC for 1s)
Propagation delay 70 ns max. (to be treated as one additional hub)
Max. output current 200 mA (meaning that the connected debug probe may not consume more than 200 mA)
USB Full-Speed
Short circuit protection

Overview

The SEGGER USB Isolator (8.07.02) fits between the host PC and a J-Link or Flasher and isolates the probe from the PC, with 3kV DC basic isolation (for 1s). The link runs at USB Full-Speed and the isolator supplies the probe with up to 200mA. Use it when the PC and the target application are not on the same ground, or to protect the probe from spikes and overvoltage from low-budget USB hubs.

The SEGGER USB Isolator (part number 8.07.02) sits in the USB link between the host PC and a J-Link or Flasher, giving 3kV DC basic isolation (for 1s) between the probe and the host. It runs the connection at USB Full-Speed (12 Mbit/s) with a maximum propagation delay of 70ns, and supplies the probe with up to 200mA. It suits setups where the PC and the target application are not on the same ground, and it protects the probe from electrical spikes and from the overvoltage that low-budget USB hubs can cause.

Host-Side Isolation Without Slowing the Debug Link

Isolating on the host side forces the PC to talk to the probe at USB Full-Speed. SEGGER states that this does not, or not significantly, reduce debug and flash programming speed. The 70ns propagation delay is treated as one additional USB hub. Host-side isolation works with every debug interface the probe supports, including JTAG, SWD (with or without SWO), FINE, C2 and UART, and it isolates both the probe and the target from the PC. Where USB Hi-Speed (480 Mbit/s) is needed, isolate on the target side instead with the JTAG or SWD Isolator, which typically limits the target-side debug speed.

Connectors, Indicators and Protection

A USB Micro-B connector faces the PC and a USB Type-A connector faces the J-Link or Flasher. A green PWR LED shows the isolator is powered and can supply the probe side; a red/orange OVL LED shows overload when the probe draws too much current. The isolator has short-circuit protection.

What's Included

SEGGER publishes no package list for the USB Isolator. You receive the isolator itself. SEGGER does not say whether a USB Micro-B cable for the host side is supplied, so ask us before ordering if you need one.

Specifications

Isolation 3kV DC for 1s, basic isolation
USB speed USB Full-Speed, 12 Mbit/s
Propagation delay 70ns max. (counts as one additional hub)
Max. output current to probe 200mA
Host-side connector USB Micro-B
Probe-side connector USB Type-A
Indicators PWR (green), OVL overload (red/orange)
Protection Short-circuit protection
Compatible J-Link models PRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact
Compatible Flasher models PRO, PRO XL, Compact, Portable PLUS

Limitations

  • The host link runs at USB Full-Speed only. For Hi-Speed USB, isolate on the target side with the JTAG or SWD Isolator.
  • The connected probe may draw no more than 200mA.
  • On a J-Link PRO V4 or J-Link ULTRA+ V4, apply firmware updates with the isolator removed. SEGGER reports that these two models can lose communication during a firmware update made through the USB Isolator; refit it once the update has finished.
  • Basic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.
  • SEGGER does not support other vendors' USB isolators with J-Link; their use is at your own risk.

USB Isolator Compared with Other SEGGER Isolators

Isolator Isolated link Isolation Max. speed Price ex VAT
USB Isolator (this product) Host PC to probe, USB 3kV DC for 1s, basic USB Full-Speed, 12 Mbit/s €231,95
JTAG Isolator Probe to target, JTAG, 20-pin 0.1" 1kV DC, basic 4 MHz €282,95
SWD Isolator Probe to target, SWD and SWO, 20-pin 0.1" 1kV DC, basic 4 MHz €300,95
J-Trace Isolator J-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05" 1kV DC, basic 4 MHz debug, 75 MHz trace clock €400,95

Order the USB Isolator for €231,95 ex VAT. Check that your probe is among the compatible models in the specifications above, such as the J-Link BASE Classic, J-Link PLUS Classic or Flasher PRO, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Isolation3kV DC for 1s, basic isolation
Propagation delay70ns max. (counts as one additional hub)
Max. output current to probe200mA
IndicatorsPWR (green), OVL overload (red/orange)
ProtectionShort-circuit protection
Host and Target Interface
Host-side connectorUSB Micro-B
Probe-side connectorUSB Type-A
Performance
USB speedUSB Full-Speed, 12 Mbit/s
Software and Compatibility
Compatible J-Link modelsPRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact
Compatible Flasher modelsPRO, PRO XL, Compact, Portable PLUS
Ordering information
Part number (SKU)8.07.02
ManufacturerSEGGER Microcontroller GmbH
EAN5055383619979
Warranty12 months
Shipping weight0.05 kg
  • 1 × SEGGER USB Isolator Adapter

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

3 questions
  • Will the USB Isolator Slow Down Debugging?

    Not significantly, according to SEGGER. The host link runs at USB Full-Speed (12 Mbit/s), which SEGGER describes as typically fully sufficient for debugging and flash programming.

    Answered by John LeggUpdated 16 Nov 2026
  • Which Isolator Keeps USB Hi-Speed?

    The target-side isolators. The JTAG Isolator and SWD Isolator allow the USB link to run at Hi-Speed (480 Mbit/s) on J-Link models that support it, but typically limit the target-side debug speed, to 4 MHz on both.

    Answered by John LeggUpdated 16 Nov 2026
  • Does the USB Isolator Work with SWD, JTAG and Other Debug Interfaces?

    Yes. SEGGER states that host-side isolation works with all the debug interfaces the probe supports, including JTAG, SWD (with or without SWO), FINE, C2 and UART. The isolator sits in the USB link and leaves the target connection unchanged.

    Answered by John LeggUpdated 16 Nov 2026

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.