
Key Features
Overview
The Supply Adapter provides a fixed I/O voltage level for VTref, adjustable from 1.2V to 5.0V and set to 3.3V by default, so the target board does not need to supply VTref on pin 1. It sits between a J-Link or Flasher and the target on a standard 20-pin 0.1" socket and header. All other signals are passed through 1:1.
The SEGGER Supply Adapter (part number 8.06.14) provides a fixed I/O voltage level for VTref, adjustable from 1.2V to 5.0V and set to 3.3V by default, so the target board does not need to supply VTref on pin 1. It sits between a J-Link or Flasher and the target on a standard 20-pin 0.1" socket and header, with all other signals passed through 1:1.
Fixed VTref Without a Target Connection
J-Link uses VTref (pin 1) to detect whether the target has power, to set the logic-level reference for its inputs and to drive its outputs to the target; it is normally fed from Vdd of the target board. Where the target cannot provide it, the Supply Adapter generates the level on board instead, which reduces the wiring needed on the target. Pin assignments for the standard J-Link 20-pin 0.1" connector are in our SEGGER J-Link 20-pin connector pinout guide.
Voltage Set by a Single Resistor
The I/O voltage is selected by one SMD 0603 resistor, so changing it from the 3.3V default needs soldering. SEGGER's schematic shows a voltage regulator (MCP1826T) generating the level.
SEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS. The J-Link / J-Trace User Guide points to it in its section on VTref.
Specifications
| Part number | 8.06.14 |
|---|---|
| Function | Fixed VTref (I/O voltage) level in place of the target's VTref |
| I/O voltage range | 1.2V to 5.0V, adjustable |
| Default I/O voltage | 3.3V |
| Voltage setting | Single SMD 0603 resistor (soldering required) |
| Connectors | 20-pin 0.1" socket and header |
| Signal mapping | 1:1 except VTref (pin 1) |
What's Included
SEGGER publishes no box contents list for this adapter; the Supply Adapter itself is supplied.
Limitations
- Changing the I/O voltage needs a resistor change and soldering.
- SEGGER describes it as a source for the VTref I/O level, not as a target power supply. For target power, see the Target Supply Adapter or 5V Target Supply Adapter.
- No J-Link EDU models are on SEGGER's suitable products list.
Supply Adapter Compared with Related Adapters
| Adapter | What it supplies | Price ex VAT |
|---|---|---|
| Supply Adapter (this product) | Fixed VTref level, 1.2V to 5.0V, in place of the target's VTref | €101,95 |
| Target Supply Adapter | Adjustable supply voltage to the target | €105,95 |
| 5V Target Supply Adapter | Fixed 5V supply to the target | €162,95 |
| Programming Voltage Adapter | Programming and target supply voltages, 4V to 20V, from an external supply | €162,95 |
Order the Supply Adapter for €101,95 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.14 |
| Function | Fixed VTref (I/O voltage) level in place of the target's VTref |
| I/O voltage range | 1.2V to 5.0V, adjustable |
| Default I/O voltage | 3.3V |
| Voltage setting | Single SMD 0603 resistor (soldering required) |
| Host and Target Interface | |
| Connectors | 20-pin 0.1" socket and header |
| Signal mapping | 1:1 except VTref (pin 1) |
| Ordering information | |
| Part number (SKU) | 8.06.14 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614844 |
| Warranty | 12 months |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER Supply Adapter
Contact us to confirm the full contents of the box.
Questions and Answers
-
What Voltage Does the Supply Adapter Provide?
3.3V by default. It can be set anywhere from 1.2V to 5.0V by changing a single SMD 0603 resistor, which needs soldering.
-
Does It Power My Target Board?
SEGGER describes it as providing the VTref I/O level that J-Link would otherwise take from pin 1 of the target, not as a target supply. To power the target, look at the Target Supply Adapter or the 5V Target Supply Adapter.
No questions match your search.