Skip to product information
1 of 3

SEGGER Microcontroller GmbH

SEGGER Renesas RX Adapter

SEGGER Renesas RX Adapter

Adapts from .1" 20-pin Standard connector to 14-pin RX600 JTAG connector incl. .1" 14-pin cable

SKU: 8.06.01

Regular price
€162,95 EUR exc tax
Regular price Sale price
€162,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

The RX Adapter maps the standard J-Link 20-pin 0.1" connector to the standard 14-pin 0.1" Renesas connector, for J-Link or Flasher connections to Renesas RX600, RX200 and RX100 series MCUs over JTAG or FINE. A jumper can power the target at 3.3V or 5V through VTref on pin 8, and the default setting is off.

The SEGGER RX Adapter (part number 8.06.01) maps the standard J-Link 20-pin 0.1" connector to the standard 14-pin 0.1" Renesas connector, for J-Link or Flasher connections to Renesas RX600, RX200 and RX100 series MCUs over JTAG or FINE. A jumper can power the target at 3.3V or 5V.

JTAG and FINE Connections to Renesas RX MCUs

SEGGER lists JTAG for RX610, RX621, RX62G, RX62N, RX62T, RX630, RX631, RX63N, RX63T, RX64M, RX65N, RX660, RX66T, RX71M and RX72N, and FINE for RX111, RX13T, RX140, RX210, RX21A and RX220. In FINE mode the FINED line is open drain. On revisions covered by SEGGER's product page it needs a pull-up on the target (1k Ohm recommended); SEGGER's Knowledge Base says Rev9 has a 3.3k pull-up on the adapter, so no target pull-up is needed. Probe-side pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.

Optional 3.3V or 5V Target Supply

The adapter can power the target hardware, with 3.3V or 5V selected by a jumper. With the supply option jumpered, the target is powered through VTref (pin 8 of the 14-pin connector). It ships set to "do not power target", with the jumper open.

SEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher Portable PLUS and Flasher Secure.

Specifications

Part number 8.06.01
Probe side J-Link 20-pin, 0.1" (2.54mm)
Target side Renesas standard 14-pin, 0.1"
Target interfaces JTAG, FINE
Target series Renesas RX600, RX200, RX100
JTAG pinout (14-pin) 1 TCK, 3 nTRST, 4 EMLE, 5 TDO, 7 MD0, 9 TMS, 10 UB, 11 TDI, 13 nRES
FINE pinout (14-pin) 1 FINEC, 4 not connected (Rev9: GND), 7 FINED, 10 UB, 13 nRES
FINED pull-up Older revisions: 1k Ohm on target recommended; Rev9: 3.3k on adapter
Target supply 3.3V or 5V via jumper, through VTref (pin 8); default off

What's Included

  • 1 x RX Adapter

Limitations

  • SEGGER's product page says the RX FINE Adapter is required for FINE on RX63x or RX72N; its Knowledge Base says RX Adapter Rev9 replaces the RX FINE Adapter. Ask us which revision ships.
  • SEGGER notes that adapter revisions older than 5 may lack FINE support; the revision, or on older units a production date, is printed on the back.
  • No J-Link EDU models are on SEGGER's suitable products list.

RX Adapter Compared with Related Adapters

Adapter Target Interfaces Price ex VAT
RX Adapter (this product) Renesas RX600, RX200, RX100 JTAG, FINE; optional 3.3V or 5V target supply €162,95
RX FINE Adapter Renesas RX FINE, with 3k3 pull-up on FINED €80,95
RL78 14-Pin Programming Adapter Renesas RL78 See product page €75,95
Renesas M16C Family 10-Pin Adapter Renesas M16C See product page €75,95

Order the RX Adapter for €162,95 ex VAT. Check your RX part against SEGGER's JTAG and FINE lists above, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (4 manufacturer pages)
General
Part number8.06.01
Probe sideJ-Link 20-pin, 0.1" (2.54mm)
FINED pull-upOlder revisions: 1k Ohm on target recommended; Rev9: 3.3k on adapter
Host and Target Interface
Target sideRenesas standard 14-pin, 0.1"
Target interfacesJTAG, FINE
Target seriesRenesas RX600, RX200, RX100
JTAG pinout (14-pin)1 TCK, 3 nTRST, 4 EMLE, 5 TDO, 7 MD0, 9 TMS, 10 UB, 11 TDI, 13 nRES
FINE pinout (14-pin)1 FINEC, 4 not connected (Rev9: GND), 7 FINED, 10 UB, 13 nRES
Power
Target supply3.3V or 5V via jumper, through VTref (pin 8); default off
Ordering information
Part number (SKU)8.06.01
ManufacturerSEGGER Microcontroller GmbH
EAN5055383614684
Warranty12 months
Shipping weight0.02 kg
  • 1 ×RX Adapter
  • 1 ×0.1" 14-pin cable
Engineer Q&A

Questions and Answers

3 questions
  • Do I Need the RX Adapter or the RX FINE Adapter?

    The RX Adapter covers JTAG on the parts SEGGER lists, from RX610 to RX72N, and FINE on the RX111, RX13T, RX140, RX210, RX21A and RX220. For FINE on RX63x or RX72N, SEGGER's product page says the RX FINE Adapter is required, while its Knowledge Base says RX Adapter Rev9 replaces the RX FINE Adapter. Ask us which revision ships.

    Answered by John LeggUpdated 16 Nov 2026
  • Can the RX Adapter Power My Target?

    Yes. A jumper selects 3.3V or 5V, supplied to the target through VTref on pin 8. It ships with the jumper open, so the target is not powered by default.

    Answered by John LeggUpdated 16 Nov 2026
  • Does FINE Need Anything on the Target Board?

    FINED is open drain. On revisions covered by SEGGER's product page, FINED needs a pull-up on the target (1k Ohm recommended). SEGGER's Knowledge Base says Rev9 has a 3.3k pull-up on the adapter, so no target pull-up is needed.

    Answered by John LeggUpdated 16 Nov 2026

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.